• High Power Laser and Particle Beams
  • Vol. 36, Issue 7, 076002 (2024)
Tianyu Hui, Lili Tong*, and Xuewu Cao
Author Affiliations
  • School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • show less
    DOI: 10.11884/HPLPB202436.230408 Cite this Article
    Tianyu Hui, Lili Tong, Xuewu Cao. Simulation of coolant boiling phenomenon in sodium cooled fast reactor based on porous medium approach[J]. High Power Laser and Particle Beams, 2024, 36(7): 076002 Copy Citation Text show less
    References

    [1] Tentner A M, Parma E, Wei T, et al. Severe accident approachfinal rept. Evaluation of design measures f severe accident prevention consequence mitigation[R]. Argonne: Argonne National Labaty, 2010.

    [2] Bachrata A, Bertrand F, Marie N, et al. A comparative study on severe accident phenomena related to melt progression in sodium fast reactors and pressurized water reactors[J]. Journal of Nuclear Engineering and Radiation Science, 7, 030801(2021).

    [3] Zhou Keyuan, Yu Hong, Hu Yun, . Measurement and analysis of CEFR sodium void reactivity effect[J]. Atomic Energy Science and Technology, 47, 70-74(2013).

    [4] Waltar A E, Todd D R, Tsvetkov P V. Fast spectrum reacts[M]. New Yk: Springer, 2012.

    [5] Končar B, Matkovičc M, Prošek A. NEPTUNE_CFD analysis of flow field in rectangular boiling channel[J]. The Journal of Computational Multiphase Flows, 4, 399-409(2012).

    [6] Mimouni S, Guingo M, Lavieville J. Assessment of RANS at low Prandtl number and simulation of sodium boiling flows with a CMFD code[J]. Nuclear Engineering and Design, 312, 294-302(2017).

    [7] Rose S D, Dearing J F. Posttest analysis of dryout test 7B'' of the W1 sodium loop safety facility experiment with the SABRE2P code[R]. Milwaukee: Oak Ridge National Labaty, 1981.

    [8] Ninokata H, Okano T A. Sabena: Subassembly boiling evolution numerical analysis[J]. Nuclear Engineering and Design, 120, 349-367(1990).

    [9] No H C, Kazimi M S. An investigation of the physical foundations of two-fluid representation of sodium boiling in the liquid-metal fast breeder reactor[J]. Nuclear Science and Engineering, 97, 327-343(1987).

    [10] Kruessmann R, Ponomarev A, Pfrang W, et al. Assessment of SFR reactor safety issues: Part II: Analysis results of ULOF transients imposed on a variety of different innovative core designs with SAS-SFR[J]. Nuclear Engineering and Design, 285, 263-283(2015).

    [11] PerezMartin S, Pfrang W, Haselbauer M. Analysis of the CABRI1 single fuel pin LOF experiment BI1 with SASSFR code including twophase sodium behavi[C]Proceedings of the ICAPP 2014. 2014.

    [12] Chenu A, Mikityuk K, Chawla R. TRACE simulation of sodium boiling in pin bundle experiments under loss-of-flow conditions[J]. Nuclear Engineering and Design, 239, 2417-2429(2009).

    [13] Wu Zongyun, Liu Tiancai, Wu Mingyu. Development and validation of subchannel analysis program based on two-region model for sodium cooled fast reactor assembly[J]. Atomic Energy Science and Technology, 56, 672-683(2022).

    [14] Fang Wentao, Tong Lili, Cao Xuewu. Influence of wire wrap mixing model on sub-channel analysis of sodium-cooled fast reactor assembly[J]. High Power Laser and Particle Beams, 35, 096001(2023).

    [15] Gr D, Basque G. Twodimensional calculation of sodium boiling in subassemblies[C]International Meeting on Fast React Safety Technology. 1979.

    [16] Fukano Y. SAS4A analysis on hypothetical total instantaneous flow blockage in SFRs based on in-pile experiments[J]. Annals of Nuclear Energy, 77, 376-392(2015).

    [17] Domanus H M, Shah V L, Sha W T. Applications of the COMMIX code using the porous medium formulation[J]. Nuclear Engineering and Design, 62, 81-100(1980).

    [18] Schor A L, Kazimi M S, Todreas N E. Advances in two-phase flow modeling for LMFBR applications[J]. Nuclear Engineering and Design, 82, 127-155(1984).

    [19] Xu Chi, Li Wenlong, Xie Chun, . Evaporation behavior of metal sodium[J]. Atomic Energy Science and Technology, 56, 467-474(2022).

    [20] Silver R S, Simpson H C. The condensation of superheated steam[C]Proceeding of National Engl Labaty Conference. 1961.

    [21] Schrage R W. A theetical study of interphase mass transfer[M]. New Yk: Columbia University Press, 1953.

    [22] Sobolev V. Fuel rod assembly proposal f XTADS predesign[C]Codination meeting of WP1&WP2 of DM1 IP EUROTRANS. 2006: 89.

    [23] Chen J C. A crelation f boiling heat transfer in convection flow[R]. United States, 1962.

    [24] Borishanskii V M, Gotovskii M A, Firsova É V. Heat transfer to liquid metals in longitudinally wetted bundles of rods[J]. Soviet Atomic Energy, 27, 1347-1350(1969).

    [25] Dittus F W, Boelter L M K. Heat transfer in automobile radiators of the tubular type[J]. International Communications in Heat and Mass Transfer, 12, 3-22(1985).

    [26] Bottoni M, Dorr B, Homann C, et al. Experimental and numerical investigations of sodium boiling experiments in pin bundle geometry[J]. Nuclear Technology, 89, 56-82(1990).

    [27] Huber F, Kaiser A, Mattes K, et al. Steady state and transient sodium boiling experiments in a 37-pin bundle[J]. Nuclear Engineering and Design, 100, 377-386(1987).

    [28] Perez-Martin S, Anderhuber M, Laborde L, et al. Evaluation of sodium boiling models using KNS-37 loss of flow experiments[J]. Journal of Nuclear Engineering and Radiation Science, 8, 011310(2022).

    Tianyu Hui, Lili Tong, Xuewu Cao. Simulation of coolant boiling phenomenon in sodium cooled fast reactor based on porous medium approach[J]. High Power Laser and Particle Beams, 2024, 36(7): 076002
    Download Citation