[1] William Kordonski, Aric Shorey, Arpad Sekeres. New magnetically assisted finishing method:material removal with magnetorheological fluid jet［C］. SPIE, 2003, 5180: 107～114

[2] Li Yang. Modern Optical Manufacturing Engineering［M］. Beiging:Science Press, 2008. 85～134

[3] Julius Yellowhair, Peng Su, Matt Novak et al.. Fabrication and testing of large flats［C］. SPIE, 2007, 6671: 667107

[4] Bryan K. Smith, J. H. Burge, H. M. Martin. Fabrication of large secondary mirrors for astronomical telescopes［C］. SPIE, 1998, 3134: 51～61

[5] J. H. Burge. Fizeau interferometry for large convex surfaces［C］. SPIE, 1995, 2536: 127～138

[6] Cheng Haobo. Research on lightweight technology for large aperture aspheric mirrors［J］. Optics & Optoelectronic Technology, 2004, 4(2): 26～28

[7] D. Anderson, H. Martin, J. Burge et al.. Rapid fabrication strategies for primary and secondary mirrors at steward observatory mirror laboratory［J］. SPIE, 2199: 199～209

[8] Fan Bin, Wan Yongjian, Chen Wei et al.. Manufacturing features comparing between computer control active-lap and computer control optical surface for large aspheric optics［J］. Chinese J. Lasers, 2006, 33(1): 128～132

[9] Fan Bin, Wan Yongjian, Ynag Li et al.. Manufacturing model research of active lap or large aspheric mirrors［J］. Opto-Electronic Engineering, 2005, 32(12): 59～62

[10] Li Yand, Minyou Chen, Yougjian Wan et al.. Neural network based intelligent control for active stressed lap optical polishing process［C］. SPIE, 2009, 7282: 72823

[11] Yang Zhi. Study on Specification and Analysis of Frequency Band Errors in Deterministic Optical Maching［D］.National University of Defense Technology, 2008

[12] Zhou Xusheng, Li Shengyi, Dai Yifan et al.. Correcting errors in definite area: a new mechod for controlling mid-spatial-frequency errors in optical surface［J］. Optics and Precision Engineering, 2007, 15(11): 1668～1673

[13] Wang Fuguo, Yang Hongbo, Zhao Wenxing et al.. Lightweight design and analysis of a 1.2 m SiC primary mirror［J］. Optics and Precision Engineering, 2009, 17(1): 85～91

[14] Feng Shulong, Zhang Xin, Weng Zhicheng et al.. Study on support way of large aperture mirror with flat rear surface [J]. Optical Technique, 2009, 17(1): 85～91

[15] Liu Guoqing, Ma Wenli. The finite element analsis for large-aperture lightweight mirror mount［J］. Opto-Electronic Engineering, 2001, 28(5): 14～17