• Spectroscopy and Spectral Analysis
  • Vol. 32, Issue 5, 1329 (2012)
LOU Nan-zheng*, LI Ning, and WENG Chun-sheng
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3964/j.issn.1000-0593(2012)05-1329-05 Cite this Article
    LOU Nan-zheng, LI Ning, WENG Chun-sheng. In Situ Temperature Measurement by Absorption Spectroscopy Based on Time Division Multiplexing Technology[J]. Spectroscopy and Spectral Analysis, 2012, 32(5): 1329 Copy Citation Text show less

    Abstract

    Tunable diode laser absorption spectroscopy (TDLAS) technology is a kind of high sensitivity, high selectivity of non contacting gas in situ measurement technique. In the present paper, in situ gas temperature measurement of an open environment was achieved by means of direct scanning multiple characteristic lines of H2O and combined with least-squares algorithm. Through the use of HITRAN spectral database, the boundary effect on the gas temperature and concentration measurements was discussed in detail, and results showed that the combination of scanning multiple characteristic lines and least-squares algorithm can effectively reduce the boundary effect on the gas temperature measurements under the open environment. Experiments using time division multiplexing technology to simultaneously scan 7 444.36, 7 185.60, 7 182.95 and 7 447.48 cm-1, the four characteristic H2O lines, the gas temperature of tubular furnace in the range of 573~973 K was measured under different conditions. The maximum temperature difference between absorption spectrum measurement and thermocouple signal was less than 52.4 K, and the maximum relative error of temperature measurement was 6.8%.
    LOU Nan-zheng, LI Ning, WENG Chun-sheng. In Situ Temperature Measurement by Absorption Spectroscopy Based on Time Division Multiplexing Technology[J]. Spectroscopy and Spectral Analysis, 2012, 32(5): 1329
    Download Citation