[1] Wang Q Y, Pu Y W, Liu S et al. Comparison of hastelloy coating and Fe-based amorphous composite coating prepared by laser cladding on Q235 steel[J]. Laser & Optoelectronics Progress, 53, 123102(2016).
[2] Li L Q, Yao C W, Huang J et al. Characteristics of interdendritic residual austenite in laser cladding of high hardness iron-based coating[J]. Chinese Journal of Lasers, 44, 0302011(2017).
[3] Fang L Y, Yao Y S, Yan H et al. TiB2 reinforced Ni-based gradient coating on copper alloy by laser cladding[J]. Chinese Journal of Lasers, 44, 0802001(2017).
[4] Chen J Y, Conlon K, Xue L. et al. Experimental study of residual stresses in laser clad AISI P20 tool steel on pre-hardened wrought P20 substrate[J]. Materials Science and Engineering A, 527, 7265-7273(2010). http://www.sciencedirect.com/science/article/pii/S0921509310008506
[5] Zhang P L, Yan H, Xu P Q et al. Influence of different annealing temperatures and cooling rates on amorphous and crystalline composite coating[J]. Surface & Coatings Technology, 206, 4981-4987(2012). http://www.sciencedirect.com/science/article/pii/S0257897212005580
[6] Xiao Y H. Effects of electropulsing on properties of metal materials[J]. Journal of Shanghai University of Engineering Science, 19, 12-14(2005).
[7] Lu Z C, Jiang F C, Cheng Y J et al. Progress on mechanisms study of high energy electropulsing on metals[J]. Journal of Plasticity Engineering, 22, 117-127(2015).
[8] Cao L G, Zhou R F, Li L et al. Effects of pulsed voltage on solidified microstructure of low overheat hypereutectic high chromium cast iron[J]. Hot Working Technology, 46, 32-35(2017).
[9] Bai D, Li L, Zhou R F et al. Effect of pulse current treatment on solidification microstructure of hypereutectic high chromium cast iron[J]. Transactions of Materials and Heat Treatment, 37, 76-80(2016).
[10] Hu S C, Shen J, Kong X K et al. Effect of pulse electric current on solidification structure and properties of pure aluminum[J]. Nonferrous Metals Engineering, 6, 30-34(2016).
[11] Zang H B, Hao W X, Liang B Q et al. Strengthening of 10CrNiCu steel treated by electropulsing[J]. Heat Treatment of Metals, 41, 92-97(2016).
[12] Lee Y J, Sung H M, Jin Y. et al. Improvement of mechanical property of air plasma sprayed tungsten film using pulsed electric current treatment[J]. International Journal of Refractory Metals and Hard Materials, 60, 99-103(2016). http://www.sciencedirect.com/science/article/pii/S0263436816300762
[13] Gu B P, Lai J T, Hu X. et al. Application of high-energy oscillating electric current pulse to relieve pulsed-laser surface irradiation induced residual stress in AISI1045 steel[J]. Journal of Materials Research, 32, 473-481(2017). http://journals.cambridge.org/abstract_S0884291416004027
[14] Jeong H J, Kim M J, Park J W. et al. Effect of pulsed electric current on dissolution of Mg17Al12 phases in as-extruded AZ91 magnesium alloy[J]. Materials Science & Engineering A, 684, 668-676(2017).
[15] Huang K, Cayron C, Logé R E. The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled aluminium alloy[J]. Materials Characterization, 129, 121-126(2017). http://www.researchgate.net/publication/316576972_The_surprising_influence_of_continuous_alternating_electric_current_on_recrystallization_behaviour_of_a_cold-rolled_Aluminium_alloy
[16] Zhao X M, Chen J, Lin X et al. Study on microstructure and mechanical properties of laser rapid forming inconel 718[J]. Materials Science and Engineering A, 478, 119-124(2008). http://www.sciencedirect.com/science/article/pii/S0921509307011008
[17] Wang Q Y, Zhang Y F, Bai S L et al. Microstructures, mechanical properties and corrosion resistance of hastelloy C22 coating produced by laser cladding[J]. Journal of Alloys and Compounds, 553, 253-258(2013). http://www.sciencedirect.com/science/article/pii/S0925838812020002
[18] Cao C N[M]. Principles of electrochemistry of corrosion(2008).
[19] Qian M, Li D, Liu S B et al. Corrosion performance of laser-remelted Al-Si coating on magnesium alloy AZ91D[J]. Corrosion Science, 52, 3554-3560(2010). http://www.sciencedirect.com/science/article/pii/S0010938X10003483