[1] P Koplow, L Goldberg, R P Moeller, et al.. Single-mode operation of a coiled multimode fiber amplifier［J］. Opt Lett, 2000, 25(7): 442-444.

[2] J Limpert, N Deguil-Robin, I Manek-Hnninger, et al.. High-power picosecond fiber amplifier based on nonlinear spectral compression［J］. Opt Lett, 2005, 30(4): 714-716.

[3] A K Abeeluck, C Headley, C G Jrgensen. High-power supercontinuum generation in highly nonlinear dispersion-shifted fibers by use of a continuous-wave Raman fiber laser［J］. Opt Lett, 2004, 29(18): 2163-2165.

[4] R Selvas, J K Sahu, L B Fu, et al.. High-power, low-noise, Yb-doped, cladding-pumped, three-level fiber sources at 980 nm［J］. Opt Lett, 2003, 28(13): 1093-1095.

[5] J W Kim, P Jelger, J K Sahu, et al.. High-power and wavelength-tunable operation of an Er, Yb fiber laser using a volume Bragg grating［J］. Opt Lett, 2008, 33(11): 1204-1206.

[6] Wu Bo, Liu Yongzhi, Zhang Qianshu, et al.. High efficient narrow linewidth fiber laser based on fiber grating Fabry-Perot cavity［J］. Chinese J Lasers, 2007, 34(3): 350-353.

[7] Lou Qihong, Zhou Jun, Kong Lingfeng, et al.. Recent progress of high power pulsed double cladding fiber lasers［J］. Chinese J Quantum Electronics, 2005, 22(4): 510-515.

[8] Liu Zejin, Wang Xiaolin, Zhou Pu, et al.. 1.56 kW high powr output with the coherent combination of nine fiber lasers［J］. Chinese J Lasers, 2011, 38(7): 0705008.

[9] Yan Pin, Xiao Qirong, Fu Chen, et al.. 1.6 kW all-fiber ytterbium-doped fiber laser［J］. Chinese J Lasers, 2012, 39(4): 0416001.

[10] Zhao Xiaojun, Xiao Yongliang, Wang Conggang, et al.. Simulation of pulse fiber amplifier with high peak power based on MOPA method ［J］. Laser Technology, 2009, 33(2): 172-175.

[11] Wu Bo, Du Weimin, Hou Tianjin, et al.. High power narrow linewidth fiber amplifier and laser linewidth［J］. Chinese J Lasers, 2009, 36(7): 1866-1869.

[12] Y Wang. Optimization of pulse amplification in ytterbium-doped double clad fiber amplifiers［J］. J Lightwave Technol, 2005, 23(6): 2139-2147.

[13] Wang Xiongfei, Zhao Hong, Zhu Chen, et al.. Output characteristics of high-repetition-rate narrow-pulse-width pulsed fiber laser［J］. Chinese J Lasers, 2009, 36(7): 1870-1875.

[14] Liu Xia, Du Songtao, Xue Yuhao, et al.. High repetition rate nanosecond pulse fiber amplifier based on China-made large-mode-area fiber［J］. Chinese J Lasers, 2009, 36(7): 1876-1879.

[15] C D Brooks, F D Teodoro. Multimegawatt peak-power, single-transverse-mode operation of a 100 μm core diameter, Yb-doped rodlike photonic crystal fiber amplifier［J］. Appl Phys Lett, 2006, 89(11): 111119.

[16] A Galvanauskas, M Y Cheng, K C Hou, et al.. High peak power pulse amplification in large-core Yb-doped fiber amplifiers［J］. IEEE J Sel Top Quantum Electron, 2007, 13(3): 559-566.

[17] Wu Yuexiang, Ma Xiaoming, Zhao Xiaoji. Effects of Er3+ and Yb3+ concentration on gain and noise coefficient of fiber amplifier［J］. Acta Optica Sinica, 2008, 28(6): 1057-1061.

[18] Xiang Zhen, Wang Dan, Li Tong, et al.. Numerical simulation and analysis for gain guiding effect in master oscillator power amplifier lasers［J］. Chinese J Lasers, 2011, 38(5): 0502004.

[19] Y Wang, H Po. Dynamic characteristics of double-clad fiber amplifiers for high-power pulse amplification［J］. J Lightwave Technol, 2003, 21(10): 2262-2270.