[1] Zhang L, Song B, Fu J J et al. Topology-optimized lattice structures with simultaneously high stiffness and light weight fabricated by selective laser melting: design, manufacturing and characterization[J]. Journal of Manufacturing Processes, 56, 1166-1177(2020).
[2] Xiao Z F, Yang Y Q, Xiao R et al. Evaluation of topology-optimized lattice structures manufactured via selective laser melting[J]. Materials & Design, 143, 27-37(2018).
[3] Yin S, Chen H Y, Wu Y B et al. Introducing composite lattice core sandwich structure as an alternative proposal for engine hood[J]. Composite Structures, 201, 131-140(2018).
[4] Wasono R S, Wahab D A, Azman A H. Additive manufacturing for repair and restoration in remanufacturing: an overview from object design and systems perspectives[J]. Processes, 7, 802(2019).
[5] Wong K K, Leong K C. Saturated pool boiling enhancement using porous lattice structures produced by Selective Laser Melting[J]. International Journal of Heat and Mass Transfer, 121, 46-63(2018).
[6] Seharing A, Azman A H, Abdullah S. A review on integration of lightweight gradient lattice structures in additive manufacturing parts[J]. Advances in Mechanical Engineering, 12, 1-21(2020).
[7] Choy S Y, Sun C N, Leong K F et al. Compressive properties of functionally graded lattice structures manufactured by selective laser melting[J]. Materials & Design, 131, 112-120(2017).
[8] Bai L, Xiong F, Chen X H et al. Multi-objective structural optimization design of Ti6Al4V lattice structure formed by SLM[J]. Journal of Mechanical Engineering, 54, 156-165(2018).
[9] Yang Y Q, Wang D, Wu W H. Research progress of direct manufacturing of metal parts by selective laser melting[J]. Chinese Journal of Lasers, 38, 0601007(2011).
[10] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).
[11] Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components(invited paper)[J]. Chinese Journal of Lasers, 36, 3204-3209(2009).
[12] Li S C, Mo B, Xiao G et al. Microstructure characteristics and their influence factors during laser additive manufacturing of metal materials[J]. Laser & Optoelectronics Progress, 58, 0100007(2021).
[13] Gu D D, Shi X Y, Poprawe R et al. Material-structure-performance integrated laser-metal additive manufacturing[J]. Science, 372, eabg1487(2021).
[14] Zhang J L, Li F L, Zhang H J. Research progress on preparation of metallic materials by selective laser melting[J]. Laser & Optoelectronics Progress, 56, 100003(2019).
[15] Ding R C, Du B R, Yao J et al. Mechanical properties and deformation behaviour of ARCH and BCT lattice structures manufactured by selective laser melting[J]. IOP Conference Series: Materials Science and Engineering, 727, 012001(2020).
[16] Crupi V, Kara E, Epasto G et al. Static behavior of lattice structures produced via direct metal laser sintering technology[J]. Materials & Design, 135, 246-256(2017).
[17] Srivathsan S, Ravichander B B, Moghaddam N S et al. Investigation of the strength of different porous lattice structures manufactured using selective laser melting[J]. Proceedings of SPIE, 11377, 113771B(2020).
[18] Zhong T L, He K T, Li H X et al. Mechanical properties of lightweight 316L stainless steel lattice structures fabricated by selective laser melting[J]. Materials & Design, 181, 108076(2019).
[19] Bai L, Yi C Y, Chen X H et al. Effective design of the graded strut of BCC lattice[J]. Materials, 12, 2192(2019).
[20] Azir M Z, Harun W W, Kadirgama K. A mechanical property evaluation of Ti6Al4V cellular lattice structures fabricated by selective laser melting[J]. IOP Conference Series: Materials Science and Engineering, 788, 012010(2020).
[21] Qiu C L, Yue S, Adkins N J E et al. Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting[J]. Materials Science and Engineering: A, 628, 188-197(2015).
[22] Song B, Zhuo L R, Wen Y T et al. The status and future of 4D printing technology[J]. Electromachining & Mould(2018).
[23] Tian X Y, Wang Q R, Li D C et al. Programmable morphing composite structures by 4D printing[J]. Aeronautical Manufacturing Technology, 62, 20-27(2019).
[24] Saedi S, Saghaian S E, Jahadakbar A et al. Shape memory response of porous NiTi shape memory alloys fabricated by selective laser melting[J]. Journal of Materials Science. Materials in Medicine, 29, 40(2018).
[25] Andani M T, Haberland C, Walker J M et al. Achieving biocompatible stiffness in NiTi through additive manufacturing[J]. Journal of Intelligent Material Systems and Structures, 27, 2661-2671(2016).
[26] Andani M T, Saedi S, Turabi A S et al. Mechanical and shape memory properties of porous Ni50.1Ti49.9 alloys manufactured by selective laser melting[J]. Journal of the Mechanical Behavior of Biomedical Materials, 68, 224-231(2017).
[27] Zhao Y, Taya M, Kang Y S et al. Compression behavior of porous NiTi shape memory alloy[J]. Acta Materialia, 53, 337-343(2005).
[28] Bansiddhi A, Sargeant T D, Stupp S I et al. Porous NiTi for bone implants: a review[J]. Acta Biomaterialia, 4, 773-782(2008).
[29] Ma C L, Gu D D, Lin K J et al. Selective laser melting additive manufacturing of cancer pagurus’s claw inspired bionic structures with high strength and toughness[J]. Applied Surface Science, 469, 647-656(2019).
[30] Dai D H, Gu D D, Zhang H et al. Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy[J]. Vacuum, 154, 341-350(2018).
[31] Hu Z H, Song C H, Liu L Q et al. Research progress of selective laser melting of nitinol[J]. Chinese Journal of Lasers, 47, 1202005(2020).
[32] Karamooz Ravari M R, Esfahani S N, Andani M T et al. On the effects of geometry, defects, and material asymmetry on the mechanical response of shape memory alloy cellular lattice structures[J]. Smart Materials and Structures, 25, 025008(2016).
[33] Zhao C Y, Liang H L, Luo S C et al. The effect of energy input on reaction, phase transition and shape memory effect of NiTi alloy by selective laser melting[J]. Journal of Alloys and Compounds, 817, 153288(2020).
[34] van Bael S, Kerckhofs G, Moesen M et al. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures[J]. Materials Science and Engineering: A, 528, 7423-7431(2011).
[35] Panwisawas C, Qiu C L, Sovani Y et al. On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting[J]. Scripta Materialia, 105, 14-17(2015).
[36] Yasa E, Poyraz O, Solakoglu E U et al. A study on the stair stepping effect in direct metal laser sintering of a nickel-based superalloy[J]. Procedia CIRP, 45, 175-178(2016).
[37] Biffi C A, Fiocchi J, Bassani P et al. Microstructure and martensitic transformation of selective laser melted NiTi shape memory alloy parts[C], 72-82(2019).
[38] Moghaddam N S, Saedi S, Amerinatanzi A et al. Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment[J]. Scientific Reports, 9, 41(2019).
[39] Biffi C A, Bassani P, Fiocchi J et al. Microstructural and mechanical response of NiTi lattice 3D structure produced by selective laser melting[J]. Metals, 10, 814(2020).
[40] Otsuka K, Ren X. Physical metallurgy of Ti-Ni-based shape memory alloys[J]. Progress in Materials Science, 50, 511-678(2005).
[41] Saedi S, Turabi A S, Andani M T et al. The influence of heat treatment on the thermomechanical response of Ni-rich NiTi alloys manufactured by selective laser melting[J]. Journal of Alloys and Compounds, 677, 204-210(2016).
[42] Mazur M, Leary M, Sun S J et al. Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)[J]. The International Journal of Advanced Manufacturing Technology, 84, 1391-1411(2016).
[43] Ni Q, Li G Q, Qian Q[M]. Mechanics of materials(2010).
[44] Zhao M, Liu F, Fu G et al. Improved mechanical properties and energy absorption of BCC lattice structures with triply periodic minimal surfaces fabricated by SLM[J]. Materials, 11, 2411(2018).
[45] Haberland C, Meier H, Frenzel J. On the properties of Ni-rich NiTi shape memory parts produced by selective laser melting[C], 97-104(2013).
[46] Yu C F, Hu Y J, Lu B W et al. Effect of hatch spacing on phase-transformation behavior and mechanical properties of NiTi shape memory alloy fabricated using selective laser melting[J]. Laser & Optoelectronics Progress, 58, 1914008(2021).
[47] Gall K, Maier H J. Cyclic deformation mechanisms in precipitated NiTi shape memory alloys[J]. Acta Materialia, 50, 4643-4657(2002).
[48] Maloney K J, Roper C S, Jacobsen A J et al. Microlattices as architected thin films: analysis of mechanical properties and high strain elastic recovery[J]. APL Materials, 1, 022106(2013).