Mechanical Properties of Laser Overlap Welded Joints of Stainless Steel Sheets

Hang Liang; Ying Kan; Yunlu Jiang; Huaining Chen

doi:10.3788/CJL201845.0602001

[1] Shi C Y, Gu G C, Wang H X et al. Heat source model for partial penetration lap laser welding of stainless steel railway vehicles[J]. Transactions of the China Welding Institution, 32, 85-88(2011).

[2] Mei L F, Yan D B, Chen G Y et al. Comparative study on CO2 laser overlap welding and resistance spot welding for automotive body in white[J]. Materials and Design, 78, 107-117(2015). http://www.sciencedirect.com/science/article/pii/S0261306915002137

[3] Fang H Y[M]. Welding, 56-57(2008).

[4] Takashiroyuki M[J]. Laser welding techniques of stainless steel vehicle body Foreign Locomotive & Rolling Stock Technology, 2007, 4-5.

[5] Zhou Y, Cai Y, Heng H K et al. Influence of side assist gas on microstructure and corrosion resistance of welds of austenitic stainless steel in laser welding[J]. Chinese Journal of Lasers, 44, 0502005(2017).

[6] Liu J. Research on laser lap welding technology of SUS301L austenitic stainless steel for railway vehicles[D]. Changchun: Changchun University of Science and Technology, 1-11(2011).

[7] Xing M Q, Li Z G, Sun J H et al. Effect of small diameter side-blown gas flow on fiber laser welding of medium and heavy plate[J]. Chinese Journal of Lasers, 44, 0302012(2017).

[8] Li Z J, Lü J X, Zou J L et al. Microstructure and mechanical property of joints in laser welding of stainless steels with nitrogen shielding gas[J]. Chinese Journal of Lasers, 43, 1202006(2016).

[9] Tang D, Wang C M, Tian M et al. Contrasting study on quality of SUS301L-HT joints in fiber laser welding and MIG welding[J]. Chinese Journal of Lasers, 42, 0703003(2015).

[10] Han X H, Chen J, Kan Y et al. Heat source model for non-penetration laser lap welding of stainless steel sheets[J]. Chinese Journal of Lasers, 44, 0502002(2017).

[11] Khalid M H, Katayama S. Fiber laser welding of AISI 304 stainless steel plates[C]. Quarterly Journal of the Japan Welding Society, 27, 69-73(2009).

[12] Kuryntsev S V, Gilmutdinov A K. Welding of stainless steel using defocused laser beam[J]. Journal of Constructional Steel Research, 114, 305-313(2015). http://www.sciencedirect.com/science/article/pii/S0143974X15300511

[13] Erdem M, Altug M, Karabulut M. Investigation of mechanical, microstructural, and machining properties of AISI 420 martensitic stainless steel welded by laser welding[J]. International Journal of Advanced Manufacturing Technology, 85, 481-492(2016). http://link.springer.com/article/10.1007/s00170-015-7924-2

[14] Liu J, Shi Y, Liu J et al. Effect of shielding gas on laser welding of austenitic stainless steel[J]. Laser & Optoelectronics Progress, 51, 051402(2014).

[15] Liang H, Jiang Y L, Chen H N et al. Effect of residual stress on mechanical properties of sheet laser overlap welding joints[J]. Transactions of the China Welding Institution, 38, 112-116(2017).

[16] Zhao R R, Kan Y, Jiang Y L et al[J]. Standardized width of tensile and fatigue specimens of laser lap welded joints considering residual stress Welding & Joining, 2017, 40-43.

[17] Zhu G R, Chen S, Li M M. Study on fatigue performance of stainless steel non-penetration laser lap welding of SUS301L stainless steel body[J]. Transactions of the China Welding Institution, 37, 14-18(2016).

[19] Yu M, Zhang Q D, He R Y et al. Surface hardness control technique for SUS301 and SUS304 stainless strip cold rolling[J]. Iron and Steel, 45, 64-69(2010).