Microstructure and Properties of Ni-Cr-Al Basic Alloys Fabricated by Laser Additive Manufacturing

Qun Yu; Cunshan Wang; Chuang Dong

doi:10.3788/CJL202249.1402002

[1] Guo J T[M]. Materials science and engineering for superalloys(2008).

[2] Long H B, Mao S C, Liu Y N et al. Microstructural and compositional design of Ni-based single crystalline superalloys: a review[J]. Journal of Alloys and Compounds, 743, 203-220(2018).

[3] Reed R[M]. The superalloys fundamentals and applications(2006).

[4] Pollock T M, Tin S. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties[J]. Journal of Propulsion and Power, 22, 361-374(2006).

[5] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[6] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components-process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[7] Meng X, Tian X J, Cheng X et al. Microstructure and heating treatment of DZ40M prepared by laser additive manufacturing[J]. Chinese Journal of Lasers, 45, 1002008(2018).

[8] Zhao X, Sui S, Li Z et al. Effect of forming environments on microstructure of GH4169 superalloy fabricated using high-deposition-rate laser metal deposition[J]. Chinese Journal of Lasers, 47, 0802004(2020).

[9] Zhang J, Zhang Q L, Li D et al. Effect of δ aging treatment on microstructure and tensile properties of repaired Inconel 718 alloy using laser additive manufacturing[J]. Chinese Journal of Lasers, 47, 0102001(2020).

[10] Wang Y, Huang Y L, Yang Y Q. Numerical simulation on coaxial powder feeding laser directional energy deposition of IN718[J]. Chinese Journal of Lasers, 48, 0602115(2021).

[11] Liu K L, Wang J S, Yang Y H et al. Effect of cooling rate on carbides in directionally solidified nickel-based single crystal superalloy: X-ray tomography and U-net CNN quantification[J]. Journal of Alloys and Compounds, 883, 160723(2021).

[12] Martin E, Natarajan A, Kottilingam S et al. Binder jetting of “hard-to-weld” high gamma prime nickel-based superalloy RENÉ 108[J]. Additive Manufacturing, 39, 101894(2021).

[13] Tang Y T, Panwisawas C, Ghoussoub J N et al. Alloys-by-design: application to new superalloys for additive manufacturing[J]. Acta Materialia, 202, 417-436(2021).

[14] Xu J J, Lin X, Guo P F et al. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy[J]. Journal of Alloys and Compounds, 749, 859-870(2018).

[15] Griffiths S, Tabasi H G, Ivas T et al. Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy[J]. Additive Manufacturing, 36, 101443(2020).

[16] Chen J, Xiao J K, Lu Z et al. Atomic mobilities and interdiffusivities in Ni-rich fcc Ni-Co-Cr and Ni-Al-Co-Cr systems evaluated using composition profiles and HitDIC[J]. Journal of Alloys and Compounds, 865, 158645(2021).

[17] Huang W, Chang Y A. Thermodynamic properties of the Ni-Al-Cr system[J]. Intermetallics, 7, 863-874(1999).

[18] Huang Y Y[D]. Effects of refractory elements on phase separation behavior in model Ni-Al-Cr based superalloys(2016).

[19] Mao Z G, Booth-Morrison C, Sudbrack C K et al. Interfacial free energies, nucleation, and precipitate morphologies in Ni-Al-Cr alloys: calculations and atom-probe tomographic experiments[J]. Acta Materialia, 166, 702-714(2019).

[20] Prager M, Shira C S. Welding of precipitation-hardening nickel-basealloy[J]. Welding Research Council Bulletin, 128, 1-55(1968).

[21] Cowley J M. Short- and long-range order parameters in disordered solid solutions[J]. Physical Review, 120, 1648-1657(1960).

[22] Ma Y, Wang Q, Li C L et al. Chemical short-range orders and the induced structural transition in high-entropy alloys[J]. Scripta Materialia, 144, 64-68(2018).

[23] Dong C, Wang Q, Qiang J B et al. From clusters to phase diagrams: composition rules of quasicrystals and bulk metallic glasses[J]. Journal of Physics D: Applied Physics, 40, R273-R291(2007).

[24] Dong C, Dong D D, Wang Q. Chemical units in solid solutions and alloy composition design[J]. Acta Metallurgica Sinica, 54, 293-300(2018).

[25] Yu J J, Wang Q, Li X N et al. Composition design of nickel-base superalloys based on cluster structural model[J]. Transactions of Materials and Heat Treatment, 34, 184-188(2013).

[26] Zhang Y[D]. Cluster-plus-glue-atom composition formulas for nickel-based superalloys(2018).

[27] Galindo-Nava E I, Connor L D, Rae C M F. On the prediction of the yield stress of unimodal and multimodal γ′ Nickel-base superalloys[J]. Acta Materialia, 98, 377-390(2015).

[28] Crudden D J, Mottura A, Warnken N et al. Modelling of the influence of alloy composition on flow stress in high-strength nickel-based superalloys[J]. Acta Materialia, 75, 356-370(2014).

[29] Goodfellow A J, Kelleher J, Jones N G et al. The effect of Mo on load partitioning and microstrain evolution during compression of a series of polycrystalline Ni-Based superalloys[J]. Acta Materialia, 176, 318-329(2019).

[30] Luo G Y, Cheng M P, Zhao L Z et al. Preferential interdendritic oxidation of laser additively manufactured Inconel 718[J]. Corrosion Science, 179, 109144(2021).

[31] Yu Q, Wang C S, Zhao Z S et al. New Ni-based superalloys designed for laser additive manufacturing[J]. Journal of Alloys and Compounds, 861, 157979(2021).