Laser cladding Fe-based solid solution alloy coating with high corrosion resistance

Wang Yanfang; Li Hao; Shi Zhiqiang; Xiao Yamei; Sun Xu; Wang Ting

doi:10.3788/irla201746.0806001

[1] Wang Weihua. The nature and properties of amorphous matter [J]. Progress in Physics, 2013, 33(5): 177-351. (in Chinese)

[2] Liang Xiubing, Chen Yongxiong, Cheng Jiangbo, et al. Thermal Spraying Metastable Composite Coatings Technology [M]. Beijing: Science Press, 2014. (in Chinese)

[3] Liu L, Zhang C. Fe-based amorphous coatings: structures and properties[J]. Thin Solid Films, 2014, 561: 70-86.

[4] Wu Hong, Lan Xiaodong, Liu Yong, et al. Fabrication, tribological and corrosion behaviors of a detonation gun sprayed Fe-based metallic glass coating [J]. Transactions of Nonferrous Metals Society of China, 2016, 26(6): 1629-1637.

[5] Wang Yong, Zheng Yugui, Wang Jianqiang, et al. Passivation behavior of Fe-based amorphous metallic coating in NaCl and H2SO4 solutions[J]. Acta Metallurgica Sinica, 2015, 51 (1): 49-56. (in Chinese)

[6] Liu Hongxi, Leng Ning, Zhang Xiaowei, et al. Microstructure and wear behavior of WC/Co50 composite coatings on 40Cr cutting tool surface prepared by laser cladding [J]. Infrared and Laser Engineering, 2016, 45(1): 0120001. (in Chinese)

[7] Yang Guang, Wang Xiangming, Wang Wei, et al. Microstructure and property of laser cladding TiC reinforced composition coating[J]. Infrared and Laser Engineering, 2014, 43(3): 795-799. (in Chinese)

[8] Yan Shixing, Dong Shiyun, Xu Binshi, et al. Effect of molten pool convection on pores and elements distribution in the process of laser cladding[J]. Infrared and Laser Engineering, 2014, 43(9): 2832-2839. (in Chinese)

[9] Jiang Shuai, Li Huaixue, Shi Zhiqiang, et al. Effects of hot isostatic pressing on microstructure and tensile properties of direct laser deposited Ti60 alloys[J]. Infrared and Laser Engineering, 2015, 44(1): 107-111. (in Chinese)

[10] Wang Yanfang, Xiao Lijun, Liu Mingxing, et al. Research progress of laser cladding amorphous coatings [J]. Laser & Optoelectronics Progress, 2014, 51(7): 070002. (in Chinese)

[11] Zhang Luan, Dong Chuang, Wang Cunshan, et al. Laser cladding of Fe-B-Si iron base amorphous composite materials on 45 steel surface[J]. Transactions of Materials and Heat Treatment, 2012, 33(10): 116-123. (in Chinese)

[12] Zhu Yuanyuan, Li Zhuguo, Li Ruifeng, et al. High power diode laser cladding of Fe-Co-B-Si-C-Nb amorphous coating: layered microstructure and properties[J]. Surface and Coatings Technology, 2013, 235: 699-705.

[13] Fu Qin, Hu Shubing. Properties of Fe-Mo-Ni-Si-B amorphous nanocrystalline composite coating fabricated by laser cladding[J]. Transactions of Materials and Heat Treatment, 2015, 36(11): 209-213. (in Chinese)

[14] Wang Yanfang, Lu Qinglong, Xiao Lijun, et al. Laser cladding Fe-Cr-Si-P amorphous coatings on 304L stainless[J]. Rare Metal Materials and Engineering, 2014, 43(2): 274-277.

[15] Wang Yanfang, Li Li, Lu Qinglong, et al. Laser cladding Fe-based amorphous coatings on stainless substrate[J]. Chinese Journal of Lasers, 2011, 38(6): 0603017. (in Chinese)

[16] Lu Qinglong, Wang Yanfang, Li Li, et al. Effects of scanning speed on microstructure and properties of laser cladding Fe-based amorphous composite coatings[J]. Chinese Journal of Lasers, 2013, 40(2): 0203007. (in Chinese)

[17] Hu Zhuangqi, Song Qihong, Zhang Haifeng, et al. Metal Metastable Materials [M]. Beijing: Science Press, 2006. (in Chinese)

[18] An Xulong, Liu Qibin, Zheng Bo. Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAlxSiy coating [J]. Infrared and Laser Engineering, 2014, 43(4): 1140-1144. (in Chinese)