[1] A. Lnhig, Ch Bnchal, D. Cnggi et al.. Epitaxial growth of monoclinic and cubic ZrO2 on Si(100) without prior removal of the native SiO2[J]. Thin Solid Films, 1992, 217: 125～128
[2] R. Guinebretiere, B. Soulestin, A. Danger. XRD and TEM study of heteroepotaxial growth of zirconia on magnesia single crystal[J]. Thin Solid Films, 1998, 319: 197～197
[3] S. Ben Amor, B. Rogier, G. Baud et al.. Characterization of zirconia films deposited by r.f. magnetron sputtering[J]. Materials Science and Engineering, 1998, B57: 28～39
[6] M. Boulouz, F. Tcheliebou, A. Boyer. Electrical and optical properties of magnetron-sputtered Y2O3 stabilized ZrO2 thin films[J]. J. European Ceramic Society, 1997, 17: 1741～1748
[7] W. T. Pawlewicz, D. D. Hays. Microstructure control for sputter-deposited ZrO2, ZrO2·CaO and ZrO2·Y2O3[J]. Thin Solid Films, 1982, 94: 31～45
[8] F. Tcheliebou, M. Boulouz, A. Boyer. Electrical behaviour of thin ZrO2 films containing some ceramic oxides[J]. J. Materials Science and Engineering, 1996, 38: 90～95
[9] M. Boulouz, L. Martin, A. Boulouz et al.. Effect of the dopant content on the physical properties of Y2O3-ZrO2 and CaO-ZrO2 thin films produced by evaporation and sputtering techniques[J]. Materials Science and Engineering, 1999, 67: 122～131
[10] Li Jia, Zhe Lü, Xiqiang Huang et al.. Preparation of YSZ films by EPD and its application in SOFCs[J]. J. Alloys and Compounds, 2006, 424: 299～303
[11] Shigang Wu, Hongying Zhang, Guanglei Tian et al.. Y2O3 stabilized ZrO2 thin films deposited by electron beam evaporation: structural, morphological characterization and laser induced damage threshold[J]. Applied Surface Science, 2006, 253: 1561～1566
[14] S. Tamulevicius. Stress and strain in the vacuum deposited thin films[J]. Vacuum, 1998, 51(2): 127～138
[18] Freund L B, Suresh S. Thin Film Materials——Stress, Defect Formation and Surface Evolution[M]. Cambridge: the United Kingdom at the University Press, 2003. 60～69
