Effect of Ablation Surface Microstructure on Plasma Arc Ablation Properties of C/C Throat Insert Fabricated via CVI+HPIC Methods

Xiaojun WU; Jie YANG; Rui ZHENG; Zhaofu ZHANG; Yi YANG

doi:10.15541/jim20190361

[1] R BRADLEY L, R BOWEN C, B MCENANEY et al. Shear properties of a carbon/carbon composites with non-woven felt and continuous fiber reinforcement layers. Carbon, 45, 2178-2187(2007).

[2] L ZHANG, H CUI, J WANG K. Process on the needling technology of the C/C composite preform. Carbon, 17-22(2015).

[3] A LACOMBE, T PICHON. High Temperature Composite Nozzle Extensions, a Mature and Efficient Technology to Improve Upper Stage Liquid Rocket Engine Performance. 43rd AIAA/ASME/ SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati, OH(2007).

[4] M SU J, J ZHOU S, Z LI R et al. A review of carbon-carbon composites for engineering applications. New Carbon Materials, 30, 106-114(2015).

[5] J ZHU Z, F QIANG H. Research progress of ablation and thermal structure characteristic of 4D carbon/carbon composites of throat in solid rocket motor. Journal of Propulsion Technology, 40, 20-30(2019).

[6] S FAN, L ZHANG, Y XU et al. Microstructure and properties of 3D needle-punched carbon/silicon carbide brake materials. Composites Science and Technology, 67, 2390-2398(2007).

[7] H XU C, X HAN X, Y CHENG G et al. Experimental study of ultra-high temperature interlaminar tensile strengths of 3D-needled C/C composites using the V-shaped notched specimen compression method. Mechanics of Materials, 126, 26-35(2018).

[8] Y LI, H CUI, R ZHENG et al. Fabrication and performance of a C/C composite using a needled non-woven carbon fiber felt as a preform. New Carbon Materials, 32, 56-32(2017).

[9] T CHEN, J LIAO, G LIU et al. Effects of needle-punched felt structure on the mechanical properties of carbon/carbon composites. Carbon, 41, 993-999(2003).

[10] M SU J, C SHAO H, C XIAO Z et al. Preparation and properties of needling carbon/carbon composites throat with low ablation rate. Carbon Techniques, 32, A1-A5(2013).

[12] M SUN L, J LI H, Y ZHANG S. Fracture characteristics of pitch based-carbon carbon composites. New Carbon Materials, 16, 28-31(2001).

[13] R ZHENG, Y BAI, L JI A et al. Effect of ultimate heat treatment temperature on properties of needled felt with non-woven cloth reinforced C/C composites. Materials Review, 30, 544-547(2016).

[14] R LACROIX, R FOURNET, Z DEVIN I et al. Kinetic modeling of surface reactions involved in CVI of pyrocarbon obtained by propane pyrolysis. Carbon, 48, 132-144(2010).

[16] J HUANG, J WANG, W ZOU et al. Studies for structure characteristic of pitch derived carbon at different carbonization pressure. Carbon Techniques, 25, 10-15(2006).

[17] Y VIGNOLES G, Y ASPA, M QUINTARD. Modeling of carbon/ carbon composite ablation in rocket nozzle. Composites Science and Technology, 70, 1303-1311(2010).

[18] J LEE Y, J JOO H. Investigation on ablation behavior of CFRC composites prepared at different pressure. Composites: Part A, 1285-1290(2004).

[19] B CHEN, T ZHANG L, F CHENG L et al. Ablation of pierced C/C composite nozzles in an oxygen/ethanol combustion gas generator. Carbon, 47, 545-550(2009).

[20] L KANG. Discrete particle model of aeolian sand transport: comparison of 2D and 2.5D simulations. Geomorphology, 139, 536-544(2012).

[21] L ZHA B, Y HUANG D, L QIAO S et al. Research on ablation test and ablative mechanism of carbon/carbon composites material. Journal of Solid Rocket Technology, 36, 692-696(2013).

[22] J LIU J, H LI T. Throat thermal ambient and ablation of C/C composites. Aerospace Materials & Technology, 1, 42-48(2005).