[1] S HARI GANESH, G L SAMUEL. A 3D Voronoi diagram based form error estimation method for fast and accurate inspection of free-form surfaces. Measurement, 189, 110476(2022).
[2] 韩林， 米良， 刘兴宝， 等. 应用激光跟踪仪的三坐标测量机几何误差检测方法［J］. 工程科学与技术， 2021， 53（3）： 159-165. doi: 10.15961/j.jsuese.202000320HANL， MIL， LIUX B， et al. Measurement method of geometric error of coordinate measuring machine using laser tracer［J］. Advanced Engineering Sciences， 2021， 53（3）： 159-165.（in Chinese）. doi: 10.15961/j.jsuese.202000320
[3] K ZHANG, G CHENG, W ZHANG. Evaluation of roundness error uncertainty by a Bayesian dynamic model. Measurement, 155, 107565(2020).
[4] C LIN, C HUANG, X J CAO et al. Geometric error detection of curve-face gear pairs. Advances in Mechanical Engineering, 8, 168781401667931(2016).
[5] J X CHEN, S W LIN, B W HE. Geometric error measurement and identification for rotary table of multi-axis machine tool using double ballbar. International Journal of Machine Tools and Manufacture, 77, 47-55(2014).
[6] 宋俊芳， 孙彬， 武文哲， 等. 基于激光干涉仪的叶片测量机几何误差分析与补偿［J］. 工具技术， 2022， 56（5）： 107-111. doi: 10.3969/j.issn.1000-7008.2022.05.024SONGJ F， SUNB， WUW Z， et al. Geometric error analysis and compensation of aeroengine blade measuring machine based on laser interferometer［J］. Tool Engineering， 2022， 56（5）： 107-111.（in Chinese）. doi: 10.3969/j.issn.1000-7008.2022.05.024
[7] 杨超智， 曹益平. 基于单帧四灰阶条纹投影的实时相位测量轮廓术［J］. 光学学报， 2021， 41（18）： 1812003. doi: 10.3788/AOS202141.1812003YANGC Z， CAOY P. Real-time phase measuring profilometry based on single-shot four-grayscale fringe projection［J］. Acta Optica Sinica， 2021， 41（18）： 1812003.（in Chinese）. doi: 10.3788/AOS202141.1812003
[8] S YIN, H B ZHOU, X JU et al. Vision-based measurement for decoupling identification of geometric errors of rotating axes for five-axis platform. Measurement Science and Technology, 33(2022).
[9] J MIN. Measurement method of screw thread geometric error based on machine vision. Measurement and Control, 51, 304-310(2018).
[10] Z Q LI, Z L HUANG, S YIN et al. Research on the calibration of the rotating axis of five-axis platform based on monocular vision and product of exponentials formula. Measurement, 181, 109522(2021).
[11] W L HE, A H ZHANG, P WANG. Weld cross-section profile fitting and geometric dimension measurement method based on machine vision. Applied Sciences, 13, 4455(2023).
[12] 彭聪， 缪卫东， 曾聪. 基于机器视觉的轻型梁三维振动测量方法［J］. 北京航空航天大学学报， 2021， 47（2）： 207-212. doi: 10.13700/j.bh.1001-5965.2020.0211PENGC， MIAOW D， ZENGC. Three-dimensional vibration measurement method for lightweight beam based on machine vision［J］. Journal of Beijing University of Aeronautics and Astronautics， 2021， 47（2）： 207-212.（in Chinese）. doi: 10.13700/j.bh.1001-5965.2020.0211
[13] 许丽， 张之江. 结构光测量系统的误差传递分析［J］. 光学 精密工程， 2009， 17（2）： 306-313. doi: 10.3321/j.issn:1004-924X.2009.02.012XUL， ZHANGZ J. Error propagation analysis of structured light system［J］. Opt. Precision Eng.， 2009， 17（2）： 306-313.（in Chinese）. doi: 10.3321/j.issn:1004-924X.2009.02.012
[14] Q C SUN, Z M REN, J L ZHU et al. A three-dimensional structured light vision system by using a combination of single-line and three-line lasers. Sensors, 23, 13(2022).
[15] G W YANG, Y Z WANG. Three-dimensional measurement of precise shaft parts based on line structured light and deep learning. Measurement, 191, 110837(2022).
[16] 杨国威， 张金丽. 基于光栅投影的焊后焊缝表面三维测量［J］. 焊接学报， 2022， 43（4）： 100-105， 112， 119-120. doi: 10.12073/j.hjxb.20210724001YANGG W， ZHANGJ L. Three-dimensional measurement of post-weld surface based on grating projection［J］. Transactions of the China Welding Institution， 2022， 43（4）： 100-105， 112， 119-120.（in Chinese）. doi: 10.12073/j.hjxb.20210724001
[17] 张子超， 张宗华， 高楠， 等. 基于U-Net网络的结构光三维测量术［J］. 激光与光电子学进展， 2021， 58（20）： 2010003. doi: 10.3788/LOP202158.2010003ZHANGZ C， ZHANGZ H， GAON， et al. U-net-based structured light three-dimensional measurement technology［J］. Laser & Optoelectronics Progress， 2021， 58（20）： 2010003.（in Chinese）. doi: 10.3788/LOP202158.2010003
[18] T ZHANG, J X NIU, S LIU et al. Three-dimensional measurement using structured light based on deep learning. Computer Systems Science and Engineering, 36, 271-280(2021).
[19] Y NI, J DAI, Y L ZHANG et al. Research on target 3D reconstruction and measurement technology based on binocular vision and lidar, 1780-1784(2020).
[20] L LIU, H CAI, M Z TIAN et al. Research on 3D reconstruction technology based on laser measurement. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 297(2023).
[21] Q Y LI, S Y YAN, B ZHANG et al. Dynamic measurement of beam divergence angle of different fields of view of scanning lidar. Chinese Physics B, 30(2021).
[22] B LIANG, W LIU, K LIU et al. A portable noncontact profile scanning system for aircraft assembly. Engineering, 15, 206-213(2022).
[23] M HEATH, S SARKAR, T SANOCKI et al. Comparison of edge detectors： a methodology and initial study, 143-148(2002).
[24] 杨新华， 寇为刚. 基于FPGA的Sobel算子图像边缘检测算法［J］. 仪表技术与传感器， 2013（1）： 102-104. doi: 10.1109/iccsp.2014.6949951YANGX H， KOUW G. Sobel operator image edge detection algorithm based on FPGA［J］. Instrument Technique and Sensor， 2013（1）： 102-104.（in Chinese）. doi: 10.1109/iccsp.2014.6949951
[25] 王冬云， 唐楚， 鄂世举， 等. 基于导向滤波Retinex和自适应Canny的图像边缘检测［J］. 光学 精密工程， 2021， 29（2）： 443-451. doi: 10.37188/OPE.20212902.0443WANGD Y， TANGC， ES J， et al. Image edge detection based on guided filter Retinex and adaptive Canny［J］. Opt. Precision Eng.， 2021， 29（2）： 443-451.（in Chinese）. doi: 10.37188/OPE.20212902.0443
