Effects of Type and Gradation of Aggregate on Wear Resistance of Road Concrete

LUO Fasheng; LI Bin; DU Junpeng; GUO Yiqun; MAI Junming; ZHANG Tongsheng

[1] PRANAV S, AGGARWAL S, YANG E H, et al. Alternative materials for wearing course of concrete pavements: a critical review［J］. Construction and Building Materials, 2020, 236: 117609.

[2] WANG L, YANG H Q, DONG Y, et al. Environmental evaluation, hydration, pore structure, volume deformation and abrasion resistance of low heat Portland (LHP) cement-based materials［J］. Journal of Cleaner Production, 2018, 203: 540-558.

[4] LAU C K, LEE H, VIMONSATIT V, et al. Abrasion resistance behaviour of fly ash based geopolymer using nanoindentation and artificial neural network［J］. Construction and Building Materials, 2019, 212: 635-644.

[6] DU S, JIANG Y, ZHONG J, et al. Surface abrasion resistance of high-volume fly ash concrete modified by graphene oxide: macro- and micro-perspectives［J］. Construction and Building Materials, 2020, 237: 117686.

[7] SIDDIQUE R. Effect of fine aggregate replacement with class F fly ash on the abrasion resistance of concrete［J］. Cement and Concrete Research, 2003, 33(11): 1877-1881.

[8] YOSHITAKE I, UENO S, USHIO Y, et al. Abrasion and skid resistance of recyclable fly ash concrete pavement made with limestone aggregate［J］. Construction and Building Materials, 2016, 112: 440-446.

[9] WANG D N, ZHANG W, RUAN Y F, et al. Enhancements and mechanisms of nanoparticles on wear resistance and chloride penetration resistance of reactive powder concrete［J］. Construction and Building Materials, 2018, 189: 487-497.

[10] GAO Y L, HE B, LI Y Y, et al. Effects of nano-particles on improvement in wear resistance and drying shrinkage of road fly ash concrete［J］. Construction and Building Materials, 2017, 151: 228-235.

[11] LI H, ZHANG M H, OU J P. Abrasion resistance of concrete containing nano-particles for pavement［J］. Wear, 2006, 260(11/12): 1262-1266.

[12] NAZARI A, RIAHI S. Withdrawn: compressive strength and abrasion resistance of concrete containing SiO2 and Cr2O3 nanoparticles in different curing media［J］. Magazine of Concrete Research, 2012, 64(2): 177-188.

[13] NAZARI A, RIAHI S. RETRACTED: Abrasion resistance of concrete containing SiO2 and Al2O3 nanoparticles in different curing media［J］. Energy and Buildings, 2011, 43(10): 2939-2946.

[14] RIAHI S, NAZARI A. Compressive strength and abrasion resistance of concrete containing SiO2 and CuO nanoparticles in different curing media［J］. Science China Technological Sciences, 2011, 54(9): 2349-2357.

[17] LU G Y, FAN Z P, SUN Z Q, et al. Improving the polishing resistance of cement mortar by using recycled ceramic［J］. Resources, Conservation and Recycling, 2020, 158: 104796.

[18] KHASAWNEH M A, ALSHEYAB M A. Effect of nominal maximum aggregate size and aggregate gradation on the surface frictional properties of hot mix asphalt mixtures［J］. Construction and Building Materials, 2020, 244: 118355.

[19] SIDDIQUE R, KAPOOR K, KADRI E H, et al. Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete［J］. Construction and Building Materials, 2012, 29: 270-278.

[20] SINGH G, SIDDIQUE R. Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS)［J］. Construction and Building Materials, 2012, 28(1): 421-426.