• Laser & Optoelectronics Progress
  • Vol. 51, Issue 9, 92204 (2014)
Zhou Liansheng*, Yu Xinfeng, Wu Zhihui, Rui Dawei, and Zhang Wei
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/lop51.092204 Cite this Article Set citation alerts
    Zhou Liansheng, Yu Xinfeng, Wu Zhihui, Rui Dawei, Zhang Wei. Analysis of Influence Factors of Thermal Aberrations Based on the Small Lens System[J]. Laser & Optoelectronics Progress, 2014, 51(9): 92204 Copy Citation Text show less
    References

    [1] Liu Fei, Li Yanqiu. Design of high numerical aperture projection objective for industrial extreme ultraviolet lithography[J]. Acta Optica Sinica, 2011, 31(2): 0222003.

    [2] Toshiharu Nakashima, Yasuhiro Ohmura, Taro Ogata, et al.. Thermal aberration control in projection lens [C]. SPIE, 2008, 6924: 69241V.

    [3] Scott Halle, Michael Crouse, Aiqin Jiang, et al.. Lens heating challenges for negative tone develop layers with freeform illumination: a comparative study of experimental vs. simulated results [C]. SPIE, 2012, 8326: 832607.

    [4] Shi Jinfeng, Wu Qingwen, Zhang Jianping, et al.. Thermal-optical analysis for optical window of high-altitude and high-speed aerial camera [J]. Acta Optica Sinica, 2012, 32(4): 0422004.

    [5] Lin Zhaorong. Thermal-optical analysis of a typical R-C imaging system′ s primary optical equipment [J]. Spacecraft Recovery & Remote Sensing, 2006, 27(2): 23-27.

    [6] Wang Ping, Zhang Guoyu, Wang Wei, et al.. Passive athermal design of aerial zoom lenses [J]. Acta Optica Sinica, 2012, 32(9): 0922006.

    [7] Chen Changzheng, Zhao Guijun, Zhang Xingxiang, et al.. A calculating method for temperature tolerance of space telescope [J]. Optics and Precision Engineering, 2007, 15(5): 668-673.

    [8] Jia Yong, Gao Yunguo, Shao Shuai. Opto-mechanical optimization for laser expander system under thermal loads [J]. Chinese J Lasers, 2014, 41(1): 0116003.

    [9] Yang Tianxing, Huang Wei, Shang Hongbo, et al.. Effect of material inhomogeneity on the image quality of optical systems with extremely small aberration [J]. Laser & Optoelectronics Progress, 2013, 50(11): 112202.

    [10] Fang Yu, Xiang Libin, Lü Qunbo, et al.. Design of optical window thickness and influence of its deformation on multispectral camera′s optical performance [J]. Acta Optica Sinica, 2013, 33(4): 0422007.

    [11] Chen Hua, Yang Huaijiang, Yu Xinfeng, et al.. Simulated and experimental study of laser-beam-induced thermal aberrations in precision optical systems [J]. Appl Opt, 2013, 52(18): 4370-4376.

    [12] Li Qikai. Zernike polynomials fitting in cryogenic optical thermal integration analysis [J]. Spacecraft Recovery & Remote Sensing, 2010, 31(4): 45-50.

    [13] Liu Jiaguo, Li Lin. Study on the data transfer interface in the thermal/structural/optical integrated analysis [J]. Transactions of Beijing Institute of Technology, 2007, 27(5): 427-431.

    [14] Max Born, Emil Wolf. Principles of Optics [M]. London: Pergamon Press Ltd, 1970. 523-532.

    CLP Journals

    [1] Li Kai, An Yuan, Li Zongxuan, Kong Lin, Guo Junli. Thermal Sensitivity Analysis of High Resolution Space Video Camera[J]. Laser & Optoelectronics Progress, 2015, 52(12): 122203

    [2] Xiao Yang, Xu Wendong, Zhao Chengqiang. Integrated Simulation of Opto-Mechanical System[J]. Acta Optica Sinica, 2016, 36(7): 722002

    [3] Wang Wei, Tang Xiahui, Qin Yingxiong, Xiao Longsheng, Wu Chao, Wang Zhen, Wan Wen. Influence of Resonator Mirror Surfaces on Output Mode of Radio Frequency Slab CO2 Lasers[J]. Chinese Journal of Lasers, 2016, 43(4): 402004

    [4] Xu Xiangru, Huang Wei, Jia Shuqiang, Xu Mingfei. Compensation Method of Thermal Aberration for On-Axis Two-Mirror High NA lithographic Lens[J]. Acta Optica Sinica, 2015, 35(10): 1011003

    Zhou Liansheng, Yu Xinfeng, Wu Zhihui, Rui Dawei, Zhang Wei. Analysis of Influence Factors of Thermal Aberrations Based on the Small Lens System[J]. Laser & Optoelectronics Progress, 2014, 51(9): 92204
    Download Citation