Spectra selection methods: A novel optimization way for treating dynamic spectra and in-line near infrared modeling

Haiyan Wang; Ronghua Liu; Lei Nie; Dongbo Xu; Wenping Yin; Lian Li; Hengchang Zang

doi:10.1142/s1793545820500157

[1] M. Otsuka, A. Koyama, Y. Hattori, "Real-time release monitoring for water content and mean particle size of granules in lab-sized fluid-bed granulator by near-infrared spectroscopy," RSC Adv. 4, 17461–17468 (2014).

[2] R. Liu, L. Li, W. Yin, D. Xu, H. Zang, "Near-infrared spectroscopy monitoring and control of the fluidized bed granulation and coating processes - A review," Int. J. Pharm. 530, 308–315 (2017).

[3] D. Lauri Pla, R. Kamyar, N. Hashemian, H. Mehdizadeh, M. Moshgbar, "Moisture soft sensor for batch fluid bed dryers: A practical approach," Powder Technol. 326, 69–77 (2018).

[4] V. Lourenco, D. Lochmann, G. Reich, J. Menezes, T. Herdling, J. Schewitz, "A quality by design study applied to an industrial pharmaceutical fluid bed granulation," Eur. J. Pharm. Biopharm. 81, 438–447 (2012).

[5] FDA, Guidance for Industry: PAT-A Framework for Innovative Pharmaceutical Development, Manufacturing, and Quality Assurance, DHHS, Rockville, MD (2004).

[6] R. Liu, Q. Sun, T. Hu, L. Li, L. Nie, J. Wang, W. Zhou, H. Zang, "Multi-parameters monitoring during traditional Chinese medicine concentration process with near infrared spectroscopy and chemometrics," Spectroc. Acta Pt. A-Molec. Biomolec. Spectr. 192, 75–81 (2018).

[7] A. Mali, M. Jagtap, P. Karekar, A. A. Maruska, "Brief review on process analytical technology (PAT)," Int. J. Curr. Pharm. Res. 8, 10–15 (2016).

[8] N. Sandler, "Photometric imaging in particle size measurement and surface visualization," Int. J. Pharm. 417, 227–234 (2011).

[9] J. Peters, K. Bartscher, C. Dooscher, W. Taute, M. Hooft, R. Knoochel, J. Breitkreutz, "In-line moisture monitoring in fluidized bed granulation using a novel multi-resonance microwave sensor," Talanta 170, 369–376 (2017).

[10] A. Burggraeve, T. Van Den Kerkhof, M. Hellings, J. Remon, C. Vervaet, T. De Beer, "Evaluation of in-line spatial filter velocimetry as PAT monitoring tool for particle growth during fluid bed granulation," Eur. J. Pharm. Biopharm. 76, 138–146 (2010).

[11] D. Markl, M. Zettl, G. Hannesschlager, S. Sacher, M. Leitner, A. Buchsbaum, J. Khinast, "Calibration-free in-line monitoring of pellet coating processes via optical coherence tomography," Chem. Eng. Sci. 125, 200–208 (2015).

[12] T. Sheahan, L. Briens, "Passive acoustic emissions monitoring of the coating of pellets in a fluidized bed-A feasibility analysis," Powder Technol. 283, 373–379 (2015).

[13] X. Luo, Z. Ye, H. Xu, D. Zhang, S. Bai, Y. Ying, "Robustness improvement of NIR-based determination of soluble solids in apple fruit by local calibration," Postharvest Biol. Technol. 139, 82–90 (2018).

[14] G. Mishra, S. Srivastava, B. Panda, H. Mishra, "Rapid assessment of quality change and insect infestation in stored wheat grain using FT-NIR spectroscopy and chemometrics," Food Anal. Meth. 11, 1189–1198 (2018).

[15] B. Geng, D. Yang, D. Pan, L. Wang, F. Zheng, W. Shen, C. Zhang, X. Li, "NIR-responsive carbon dots for e±cient photothermal cancer therapy at low power densities," Carbon 134, 153–162 (2018).

[16] Y. Oiknine, I. August, D. Blumberg, A. Stern, "NIR hyperspectral compressive imager based on a modi- fied Fabry–Perot resonator," J. Opt. 20, 044011(2018).

[17] C. Liu, F. Qi, F. Wen, L. Long, R. Yang, "Fluorescence detection of glutathione and oxidized glutathione in blood with a NIR-excitable cyanine probe," Meth. Appl. Fluoresc. 6, 24001 (2018).

[18] W. Niu, Z. Wei, J. Jia, S. Shuang, C. Dong, K. Yun, "A ratiometric emission NIR-fluorescent probe for sensing and imaging pH changes in live cells," Dyes Pigm 152, 155–160 (2018).

[19] S. Markovic, K. Poljanec, J. Kerc, M. Horvat, "Inline NIR monitoring of key characteristics of enteric coated pellets," Eur. J. Pharm. Biopharm. 88, 847–855 (2014).

[20] G. Hudovornik, K. Korasa, F. Vreeer, "A study on the applicability of in-line measurements in the monitoring of the pellet coating process," Eur. J. Pharm. Sci. 75, 160–168 (2015).

[21] Y. Li, C. Anderson, J. Drennen, C. Airiau, B. Igne, "Method development and validation of an inline process analytical technology method for blend monitoring in the tablet feed frame using raman spectroscopy," Anal. Chem. 90, 8436–8444 (2018).

[22] E. Hetrick, Z. Shi, L. Barnes, A. Garrett, R. Rupard, T. Kramer, T. Cooper, D. Myers, B. Castle, "Development of near infrared spectroscopy-based process monitoring methodology for pharmaceutical continuous manufacturing using an offline calibration approach," Anal. Chem. 89, 9175–9183 (2017).

[23] S. Mohan, W. Momose, J. Katz, M. Hossain, N. Velez, J. Drennen, C. Anderson, "A robust quantitative near infrared modeling approach for blend monitoring," J. Pharm. Biomed. Anal. 148, 51–57 (2018).

[24] M. Lee, D. Seo, H. Lee, I. Wang, W. Kim, M. Jeong, G. Choi, "In line NIR quantification of film thickness on pharmaceutical pellets during a fluid bed coating process," Int. J. Pharm. 403, 66–72 (2011).

[25] M. Lee, C. Park, A. Kim, B. Kwon, K. Bang, Y. Cho, M. Jeong, G. Choi, "Dynamic calibration for the in-line NIR monitoring of film thickness of pharmaceutical tablets processed in a fluid-bed coater," J. Pharm. Sci. 99, 325–335 (2010).

[26] M. Alcalà, M. Blanco, M. Bautista, J. Gonzalez, "On-line monitoring of a granulation process by NIR spectroscopy," J. Pharm. Sci. 99, 336–345 (2010).

[27] M. Fonteyne, J. Vercruysse, F. De Leersnyder, R. Besseling, A. Gerich, W. Oostra, J. Remon, C. Vervaet, T. De Beer, "Blend uniformity evaluation during continuous mixing in a twin screw granulator by in-line NIR using a moving F-test," Anal. Chim. Acta 935, 213–223 (2016).

[28] A. Peinado, J. Hammond, A. Scott, "Development, validation and transfer of a Near Infrared method to determine in-line the end point of a fluidised drying process for commercial production batches of an approved oral solid dose pharmaceutical product," J. Pharm. Biomed. Anal. 54, 13–20 (2011).

[29] X. Liu, Z. Wu, K. Yang, H. Ding, Y. Wu, "Quantitative analysis combined with chromatographic fingerprint for comprehensive evaluation of Danhong injection using HPLC-DAD," J. Pharm. Biomed. Anal. 76, 70–74 (2013).

[30] S. Liu, G. Zhang, Y. Qiu, X. Wang, L. Guo, Y. Zhao, L. Sun, "Quality evaluation of Shenmaidihuang Pills based on the chromatographic fingerprints and simultaneous determination of seven bioactive constituents," J. Sep. Sci. 39(23), 4557–4567 (2016).

[31] X. Zuo, J. Zhao, M. Povey, M. Holmes, H. Mao, "Variables selection methods in near-infrared spectroscopy," Anal. Chim. Acta 667, 14–32 (2010).

[32] H. Li, Y. Liang, Q. Xu, D. Cao, "Key wavelengths screening using competitive adaptive reweighted sampling method for multivariate calibration," Anal. Chim. Acta 648, 77–84 (2009).

[33] S. Wold, M. Sjoostroom, L. Eriksson, "PLS-regression: A basic tool of chemometrics," Chemometrics Intell. Lab. Syst. 58, 109–130 (2001).

[34] X. Xiao, J. Ma, F. Ge, X. Zhang, H. Yang, Q. Liang, Y. Wang, G. Luo, "Application of near-infrared spectroscopy for the rapid analysis of Lonicerae Japonicae Flos solution extracted by water," J. Innov. Opt. Health Sci. 7(4), 1350063 (2014).

[35] K. Phuangsombut, N. Suttiwijitpukdee, A. Terdwongworakul, "Nondestructive classification of mung bean seeds by single kernel near-infrared spectroscopy," J. Innov. Opt. Health Sci. 10(3), 1650053 (2016).

[36] X. Chu, W. Wang, C. Li, X. Zhao, H. Jiang, "Identifying camellia oil adulteration with selected vegetable oils by characteristic near-infrared spectral regions," J. Innov. Opt. Health Sci. 11(2), 1850006 (2018).