Study on Dynamic Testing of Radio Frequency Identification Under Transportation Line Based on Photoelectric Technology

Liu Jialing; Yu Xiaolei; Zhao Zhimin; Lan Xiufeng; Yu Yinshan

doi:10.3788/lop53.091204

[1] Nash II D, Mwakalonge J L, Perkins J A. An investigation of factors influencing performance of radio frequency identification (RFID): Applications in transportation[J]. Journal of Transport Literature, 2016, 10(4): 25-29.

[2] Yu Xiaolei, Yu Yinshan, Wang Donghua. Research on key techonlogies of RFID anti-collision and dynamic testing under IOT environment[J]. Internet of Things Technologies, 2012, 2(7): 25-29.

[3] Buffi A, Nepa P, Lombardini F. A phase-based technique for localization of UHF-RFID tags moving on a conveyor belt: Performance analysis and test-case measurements[J]. IEEE Sensors Journal, 2015, 15(1): 387-396.

[4] Sun Jiyong,Thierry Hernoult, Scott Irving, et al. Application of optical simulation analysis in the development of photoelectric sensor[J]. Laser & Optoelectronics Progress, 2009, 46(9): 77-80.

[5] Marrocco G, Giampaolo E D, Aliberti R. Estimation of UHF RFID reading regions in real environments[J]. IEEE Antennas and Propagation Magazine, 2009, 51(6): 44-57.

[6] Cheung B C F, Ting S L, Tsang A H C, et al. A methodological approach to optimizing RFID deployment[J]. Information Systems Frontiers, 2014, 16(5): 923-937.

[7] Nikitin P V, Rao K V S. Performance limitations of passive UHF RFID systems[C]. IEEE Antennas and Propagation Society International Symposium, 2006: 1011-1014.

[8] Lee J W, Kwon H, Lee B. Design consideration of UHF RFID tag for increased reading range[C]. IEEE MTT-S International Microwave Symposium Digest, 2006: 1588-1591.

[9] Lei Weimin. Development and application of data exchange system for transmission line based on RFID[J]. Internet of Things Technologies, 2014, 4(1): 66-67.

[10] Xue Junxing, Chen Chang′an, Chen Jing. Approach to the dynamic modeling test method of RFID system[J]. Electronic Measurement Technology, 2007, 30(2): 176-178.

[11] Yu Xiaolei, Wang Donghua, Yu Yinshan, et al. RFID reading range automatic measurement system design for logistics transportation line: ZL201220434345.4[P]. 2013-03-27．

[12] Yu Xiaolei, Wang Donghua, Yu Yinshan, et al. RFID reading range automatic measurement method design for logistics transportation line: ZL201210312559.9[P]． 2015-03-25．

[13] Yu Xiaolei, Wang Donghua, Yu Yinshan, et al. RFID multiple tags anti-collision reading distance measurement system for gate environment: ZL201320196269.2[P]. 2013-10-30．

[14] Ji Yuyu, Yu Xiaolei, Zhao Zhimin, et al. Probabilistic modeling in logistic RFID collision mechanisms and anti-collision detection[J]. Physical Testing and Chemical Analysis (Part A: Physical Testing), 2013, 49(1): 6-10.

[15] EPCglobal, Inc. Community. Dynamic test: Conveyor portal test methodology[S/OL]. United-Kingdom: EPCglobal Ratified Standard, 2006: [2016-07-16]. http: //www.gs1.org/docs/epc/uhfg2_1_0_9-TestMethod-ConveyorPortal_1_1_4-20060405.pdf.

[16] Hao J, Pei W, Xia Y, et al. Adaptive pulse signal shaping of tag response signal for RFID tag test system[J]. Electronics Letters, 2014, 50(17): 1182-1184.

[17] Chen Ruiqiang, Jiang Yuesong. Method of measurement on time-interval in pulsed laser ranging[J]. Acta Optica Sinica, 2013, 33(2): 0212004.

[18] Huang Minshuang, Long Tengyu, Liu Huihui, et al. A high-precision pulsed laser ranging time interval measurement technology based on sine curves method[J]. Chinese J Lasers, 2014, 41(8): 0808002.