Temperature Sensor Based on Multicore Fiber Supermode Interference

Dong Yan; NanKuang Chen; Zhen Tian; Yicun Yao; Liqiang Zhang

doi:10.3788/LOP202158.0706007

[1] Sui W B, Zhang D, Wang M Y et al. Review on application and theoretical models for temperature monitoring technology under intelligent well completion conditions in oil and gas field development[J]. Petroleum Geology and Recovery Efficiency, 27, 129-138(2020).

[2] Zhou Y X, Zhao J K, Liu R et al. Key technical analysis and prospect of high voltage and extra-high voltage power cable[J]. High Voltage Engineering, 40, 2593-2612(2014).

[3] Xu H, Zhu Y K, Lu Y F et al. Development and biomedical application of Raman probe[J]. Laser & Optoelectronics Progress, 56, 110005(2019).

[4] García I, Zubia J, Durana G et al. Optical fiber sensors for aircraft structural health monitoring[J]. Sensors (Basel), 15, 15494-15519(2015).

[5] Xu F S, Yan G, Zhong G S et al. Study on FBG sensor for satellite ambient temperature monitoring[J]. Laser & Infrared, 48, 762-768(2018).

[6] Huang J L, Mao L H, Chen H D et al. A MS/RF CMOS-process-compatible photodetector[J]. Chinese Journal of Semiconductors, 26, 1995-2000(2005).

[7] Yao Q Q, Meng H Y, Wang W et al. Simultaneous measurement of refractive index and temperature based on a core-offset Mach-Zehnder interferometer combined with a fiber Bragg grating[J]. Sensors and Actuators A: Physical, 209, 73-77(2014).

[8] Chen J, Deng L, Niu Y P et al. Ultranarrow dual-transmission properties of a two-cavity structure based on three asymmetric fiber Bragg gratings[J]. Chinese Journal of Lasers, 47, 0806001(2020).

[9] Xu X N, Chen Y J. Curvature sensing measurement based on seven-core fiber and few-mode fiber splicing structure[J]. Acta Optica Sinica, 39, 0306001(2019).

[10] Sun M, Xu B, Li Y. A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber[J]. Chinese Journal of Lasers, 39, s114006(2012).

[11] Li C. Research on sensing characteristics and composite parameter measurement of new optical fiber mode interferometer[D](2017).

[12] Zhang L Y, Zhang W G, Chen L et al. A fiber bending vector sensor based on M-Z interferometer exploiting two hump-shaped tapers[J]. IEEE Photonics Technology Letters, 27, 1240-1243(2015).

[13] Salceda-Delgado G, van Newkirk A, Antonio-Lopez J E et al. Compact fiber-optic curvature sensor based on super-mode interference in a seven-core fiber[J]. Optics Letters, 40, 1468-1471(2015).

[14] Villatoro J, Arrizabalaga O, Antonio-Lopez E et al. Multicore fiber sensors[C], Th3H.1(2017).

[15] Harris J, Lu P, Larocque H et al. Highly sensitive in-fiber interferometric refractometer with temperature and axial strain compensation[J]. Optics Express, 21, 9996-10009(2013).

[16] Zhao Y, Xia F, Hu H F et al. A ring-core optical fiber sensor with asymmetric LPG for highly sensitive temperature measurement[J]. IEEE Transactions on Instrumentation and Measurement, 66, 3378-3386(2017).

[17] Bae H, Yun D, Liu H J et al. Hybrid miniature Fabry-Perot sensor with dual optical cavities for simultaneous pressure and temperature measurements[J]. Journal of Lightwave Technology, 32, 1585-1593(2014).

[18] Zhu Z D, Liu L, Liu Z H et al. Surface-plasmon-resonance-based optical-fiber temperature sensor with high sensitivity and high figure of merit[J]. Optics Letters, 42, 2948-2951(2017).

[19] Liu G G, Han M, Hou W L. High-resolution and fast-response fiber-optic temperature sensor using silicon Fabry-Pérot cavity[J]. Optics Express, 23, 7237-7247(2015).

[20] Tapetado A, Pinzón P J, Zubia J et al. Polymer optical fiber temperature sensor with dual-wavelength compensation of power fluctuations[J]. Journal of Lightwave Technology, 33, 2716-2723(2015).

[21] Jiang Y X, Fang Z J, Du Y Q et al. Highly sensitive temperature sensor using packaged optical microfiber coupler filled with liquids[J]. Optics Express, 26, 356-366(2018).

[22] Weng S J, Pei L, Wang J S et al. High sensitivity D-shaped hole fiber temperature sensor based on surface plasmon resonance with liquid filling[J]. Photonics Research, 5, 103-107(2017).