Orthogonal Experiments and Variance Analysis in Nd∶YAG Pulsed Laser Trepanning Drilling

Ren Naifei; Zhang Li; Wang Houxiao; Xia Kaibo; Shi Chunhui

doi:10.3788/lop54.061408

[1] Jackson M J, Neill W O. Laser micro-drilling of tool steel using Nd∶YAG lasers［J］. Journal of Materials Processing Technology, 2003, 142: 517-525.

[2] Hu Fenglan, Dong Lijun, Gao Weiguo. Laser boring technique for small-deep hole［J］. Tool Technology, 2009, 43(3): 42-44.

[3] Schucker D. Handbook of the EuroLaser academy［M］. New York: Springer, 1998.

[4] Chu Qingchen, Yu Gang, Lu Guoquan, et al. Two-dimensional numerical investigation for the effects of laser process parameters on hole type during laser drilling［J］. Chinese J Lasers, 2011, 38(6): 0603001.

[5] Rong Lierun. The laser microhole processing technology and its applications in space navigation field［J］. Aviation Precision Manufacturing Technology, 2009, 45(6): 30-33.

[6] Fohl C, Breitlin D, Jasper K, et al. Precise drilling of metal and ceramics with short and ultrashort pulse solid state lasers［C］. SPIE, 2002, 4426: 104-107.

[7] Ashkenasi D, Kaszemeikat T, Mueller N, et al. Laser trepanning for industrial applications［J］. Physics Procedia, 2011, 12(1): 323-331.

[8] Jahns D, Kaszemeikat T, Mueller N, et al. Laser trepanning of stainless steel［J］. Physics Procedia, 2013, 41: 630-635.

[9] Wang Yanli. The research of technology for laser helical drilling［D］. Wuhan: Huazhong University of Science & Technology, 2012.

[10] Choudhury I A, Chong W C, Vahid G. Hole qualities in laser trepanning of polymeric materials［J］. Optics and Lasers in Engineering, 2012, 50(9): 1297-1305.

[11] Chien W, Hou S. Investigating the recast layer formed during the laser trepan drilling of Inconel 718 using the Taguchi method［J］. International Journal of Advanced Manufacturing Technology, 2007, 33: 308-316.

[12] Bharatish A, Murthy H N N, Anand B, et al. Characterization of hole circularity and heat affected zone in pulsed CO2 laser drilling of alumina ceramics［J］. Optics and Technology, 2013, 53: 22-32.

[13] Goyal R, Dubey A K. Hybrid approach for modeling and optimization of hole taper during laser trepan drilling of Ti-6Al-4V alloy sheet［J］. Procedia Material Science, 2014, 5: 1781-1790.

[14] Goyal R, Dubey A K. Modeling and optimization of geometrical characteristics in laser trepan drilling of titanium alloy［J］. Mechanical Science and Technology, 2016, 30(3): 1281-1293.

[15] Wang Yuqian, Zhang Junzhan, Liu Yongsheng, et al. Effect of femtosecond laser parameters on TiC ceramic micro-hole drilling［J］. Chinese J Lasers, 2014, 41(10): 1003010.

[16] Wang Jun, Liu Dun, Zhai Zhongsheng, et al. Experimental and mechanism analysis of holes drilling on rubber damping material using nanosecond laser［J］. Acta Optica Sinica, 2015, 35(2): 0216004.

[17] Ren Naifei, Xia Kaibo, Wang Houxiao. Investigation on microhole formation characteristics for pulsed laser drilling of aluminum alloy 5052 sheets［J］. Laser & Optoelectronics Progress, 2015, 52(12): 121402.

[18] Ren Naifei, Zhang Wen, Wang Houxiao, et al. Process optimization for pulsed laser drilling of 20Cr13 sheets based on orthogonal experiments［J］. Laser & Optoelectronics Progress, 2016, 53(3): 031410.

[19] Fu Lijun, Bao Zhongxu, Chen Zezhong, et al. Combination of orthogonal experiment,neural network and genetic algorithm［J］. Journal of Nanchang University, 2003, 25(1): 79-82.

[21] Ross P J. Taguchi techniques for quality engineering［M］. New York: McGraw-Hill, 1989.

[22] Bendell A, Disney J, Pridmore W A. Taguchi method: Applications in world industry［M］. New York: Springer, 1989.