[1] Fang S J, Haplepete S, Chen W, et al. Analyzing atomic force microscopy images using spectral methods[J]. Journal of Applied Physics, 1997, 82(12): 5891-5898.
[3] ISO10110. Optics and optical instruments-Preparation of drawings for optical elements and systems-Part8: Surface Texture[S]. 1997.
[4] English R E, Laumann C W, Miller J L, et al. Optical system design of the national ignition facility[C]//SPIE, 1998, 3482: 726-736.
[5] Duparre A, Ferre-Borrull J, Gliech S, et al. Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components[J]. Applied Optics, 2002, 41(1): 154-171.
[6] Harvey J E, Schroder S, Choi N, et al. Total integrated scatter from surfaces with arbitrary roughness correlation widths and incident angles[J]. Optical Engineering, 2012, 51(1): 013402.
[7] Ferre-Borrull J, Steinert J, Duparre A. Extending the capabilities of scanning probe microscopy engineering microroughness analysis in surface engineering[J]. Surface and Interface Analysis, 2002, 33: 92-95.
[8] Duparre A, Jakobs S. Combination of surface characterization techniques for investigating optical thin-film components[J]. Applied Optics, 1996, 35(25): 5052-5058.
[9] Church E L. The optimal estimation of finish parameters[C]//SPIE, 1991, 1530: 71-85.
[10] Elson J M, Bennett J M. Calculation of the power spectral density from surface profile data[J]. Applied Optics, 1995, 34(1): 201-208.
[11] Church E L, Takacs P Z. Instrumental effects in surface finish measurement[C]//SPIE, 1988, 1009: 46-55.
[12] Stover J C. Optical Scattering: Measurement and Analysis[M]. 2nd ed. Washington: SPIE Optical Engineering Press, 1995: 48.
[13] Cheng X B, Zhang J L, Ding T, et al. The effect of an electric field on the thermomechanical damage of nodular defects in dielectric multilayer coatings irradiated by nanosecond laser pulses[J]. Light Science & Applications,2013, 2(6): e80.
[14] Church E L. Fractal surface finish[C]//SPIE, 1987, 830: 75-83.