• Infrared and Laser Engineering
  • Vol. 34, Issue 6, 669 (2005)
[in Chinese]*, [in Chinese], and [in Chinese]
Author Affiliations
  • [in Chinese]
  • show less
    DOI: Cite this Article
    [in Chinese], [in Chinese], [in Chinese]. LiNbO3 Q-switch used as tuning element for flash-lamp pumped Cr-Tm: YAG laser[J]. Infrared and Laser Engineering, 2005, 34(6): 669 Copy Citation Text show less

    Abstract

    To minimize the elements inserted in the cavity of 2μm band tunable laser and reduce the cavity loss, a special designed prism based on the disperse property of LiNbO3 crystal was used as tuning and Q-switching element . Two faces cut at Brewster's angle make the prism work well as tuning element. In a flash-lamp pumped Cr-Tm:YAG 2μm laser with the LiNbO3 prism, active Q-switching operation was realized at room temperature, while the tuning range of 1.95 -2.08μm was obtained with the prism. The repetition rate of the Q-switched laser was 1-5 Hz. The experimental result shows that the Q-switching and tuning method is valid.
    [in Chinese], [in Chinese], [in Chinese]. LiNbO3 Q-switch used as tuning element for flash-lamp pumped Cr-Tm: YAG laser[J]. Infrared and Laser Engineering, 2005, 34(6): 669
    Download Citation