Identification of flow rate and temperature in the pipeline based on equal variance fitting of surface temperature measurement

Zhang Lin; Yang Li; Kou Wei; Fan Chunli

doi:10.3788/irla201847.0104002

[1] Liang Guowei, Wen Yingjie, Huang Zhenwei, et al. Analysis and studies for measuring principle and affecting factors of hot type gas flow meters[J]. Journal of China Jiliang University, 2008, 19(3): 201-205. (in Chinese)

[2] Tian Gan, Yang Zhengwei, Zhu Jietang, et al. Vibration characteristics and acoustic chaos analysis of ultrasonic infrared thermal wave test[J]. Infrared and Laser Engineering, 2016, 45(3): 39-44. (in Chinese)

[3] Li Meihua, Zeng Zhi, Shen Jingling, et al. Numerical simulation of defects depth quantitative measurement in pulsed infrared nondestructive testing[J]. Infrared and Laser Engineering, 2013, 42(4): 875-879. (in Chinese)

[4] Huang C H, Liu C Y. A three-dimensional inverse geometry problem in estimating simultaneously two interfacial configurations in a composite domain[J]. International Journal of Heat & Mass Transfer, 2010, 53(1-3): 48-57.

[5] Huang C H, Chen C W. A boundary element-based inverse-problem in estimating transient boundary conditions with conjugate gradient method[J]. International Journal for Numerical Methods in Engineering, 1998, 42(5): 943-965.

[6] Wang G J, Zhu L N, Chen H. A decentralized fuzzy inference method for solving the two-dimensional steady inverse heat conduction problem of estimating boundary condition[J]. International Journal of Heat & Mass Transfer, 2011, 54(13): 2782-2788.

[7] Shi Hongchen, Zhang Xiaohuai, Sun Fengrui, et al. Inverse heat transfer algorithm for multi-phase interface detection of oil tank based on infrared imaging temperature measurement [J]. Infrared and Laser Engineering, 2013, 42(S1): 24-29. (in Chinese)

[8] Xue Qiwen, Zhang Xueshan. Research of inverse problem of thermo-mechanical coupling[J]. Journal of Mechanical Engineering, 2010, 46(18): 157-168. (in Chinese)

[9] Lu Tao, Li Chunyong. Identifying of inner wall unsteady temperature at T-junction using conjugate gradient method[J]. Journal of Thermal Science and Technology, 2011, 10(1): 45-50. (in Chinese)

[10] Yang Kun, Yang Li, Su Gao, et al. Diagnosis of exhaust temperature non-uniformity of diesel engine based on infrared temperature measurement[J]. Infrared Technology, 2014, 36(3): 244-248. (in Chinese)

[11] Wang Ye, Yang Li. Research on identification of flow rate and temperature in the pipeline[J]. Acta Metrologica Sinica, 2017, 38(4): 477-480. (in Chinese)

[12] Men Qiming. Study on heat transfer mechanism and calculation method of passive residual heat removal heat exchanger[D]. Shanghai: East China University of Science and Technology, 2015. (in Chinese)

[13] Gnielinski V. New equations for heat and mass transfer in turbulent pipe and channel flows[J]. International Chemical Engineering, 1976, 6(2): 359-368.

[14] Chen Lin, Yang Li, Fan Chunli, et al. Quantitative identification of coating thickness and debonding defects of TBC by pulse phase technology[J]. Infrared and Laser Engineering, 2015, 44(7): 2050-2056. (in Chinese)

[15] Ozisik M N. Inverse Heat Transfer [M]. Britain: Taylor & Francis, 2000.

[16] Gao Yongxiang. Calculating methods to standard error of parametric ratio of linear fitting[J]. Journal of Shanxi University, 2003, 26(4): 320-323. (in Chinese)

[17] Fan Wenbo, Wang Wenlong, Chen Yuelong, et al. Methods for least squares fitting of a straight line and their application in geochronology[J]. Geological Review, 2013, 59(5): 801-815. (in Chinese)