Temperature Compensation Fiber Bragg Grating Pressure Sensor Based on Plane Diaphragm

Minfu LIANG; Xinqiu FANG; Yaosheng NING

doi:10.1007/s13320-018-0417-9

[1] S. J. Mihailov, “Fiber Bragg grating sensors for harsh environments,” Sensors, 2012, 12(2): 1898-1918.

[2] B. Lee, “Review of the present status of optical fiber sensors,” Optical Fiber Technology, 2003, 9(2): 57-59.

[3] H. Tsuda, “Fiber Bragg grating vibration-sensing system, insensitive to Bragg wavelength and employing fiber ring laser,” Optics Letters, 2010, 35(14): 2349–2351.

[4] A. P. Zhang, B. O. Guan, X. M. Tao, and H. Y. Tam, “Experimental and theoretical analysis of fiber Bragg gratings under lateral compression,” Optics Communications, 2002, 206(1–3): 81-87.

[5] D. Song, J. Zou, Z. Wei, and H. L. Cui. “High-sensitivity fiber Bragg grating pressure sensor using metal bellows,” Optics Engineering, 2009, 48(3): 034403-1-034403-3.

[6] B. J. Peng, Y. Zhao, J. Yang, and M. Zhao, “Pressure sensor based on a free elastic cylinder and birefringence effect on an FBG with temperature-compensation,” Measurement, 2005, 38(2): 176-180.

[7] Y. Zhang, Z. G. Liu, Z. Y. Guo, S. Z. Yuan, D. J. Feng, X. Y. Dong, et al., “A high-sensitivity fiber grating pressure sensor and its pressure sensing characteristics,” Acta Optica Sinica, 2002, 22(1): 89-91.

[8] Y. Zhao, C. B. Yu, and Y. B. Liao, “Differential FBG sensor for temperature compensated high-pressure (or displacement) measurement,” Optics & Laser Technology, 2004, 36(1): 39-42.

[9] Y. Zhao, Y. Zhao, and M. G. Zhao, “Novel force sensor based on a couple of fiber Bragg gratings,” Measurement, 2005, 38(1): 30-33.

[10] D. Sengupta, M. S. Shankar, P. S. Reddy, R. L. N. S. Prasad, and K. Srimannarayana, “Sensing of hydrostatic pressure using FBG sensor for liquid level measurement,” Microwave & Optical Technology Letters, 2012, 7(54): 1679-1683.

[11] H. Ahmad, S. W. Harun, W. Y. Chong, M. Z. Zulkifli, M. M. M. Thant, Z. Yusof, et al., “High-sensitivity pressure sensor using a polymer embedded FBG,” Microwave & Optical Technology Letters, 2008, 50(1): 60-61.

[12] L. H. Liu, H. Zhang, Q. D. Zhao, Y. L. Liu, and F. Li, “Temperature-independent FBG pressure sensor with high sensitivity,” Optical Fiber Technology, 2007, 13(1): 78-80.

[13] H. L. Pan, H. J. Dong, G. Y. Zhang, and J. He, “Research on fiber grating pressure/temperature monitoring device of distinguish range and double sensitivity,” Chinese Journal of Lasers, 2013, 40(2): 0205005-1-0205005-6.

[14] J. Huang, Z. D. Zhou, X. Y. Wen, and D. S. Zhang, “A diaphragm-type fiber Bragg grating pressure sensor with temperature compensation,” Measurement Journal of the International Measurement Confederation, 2013, 46(3): 1041-1046.

[15] H. J. Sheng, W. F. Liu, K. R. Lin, S. S. Bor, and M. Y. Fu, “High-sensitivity temperature-independent differential pressure sensor using fiber Bragg gratings,” Optics Express, 2008, 16(20): 16013-1-16013-8.

[16] Y. S. Hsu, L. Wang, W. F. Liu, and Y. J. Chiang, “Temperature compensation of optical fiber Bragg grating pressure sensor,” IEEE Photonics Technology Letters, 2006, 18(7): 874-876.

[17] W. H. Wang, X. S. Jiang, and Q. X. Yu, “Temperature self-compensation fiber-optic pressure sensor based on fiber Bragg grating and Fabry-Perot interference multiplexing,” Optics Communications, 2012, 285(16): 3466-3470.

[18] A. Cusano, A. Cutolo, J. Nasser, M. Giordano, and A. Calabrò, “Dynamic strain measurements by fibre Bragg grating sensor,” Sensors & Actuators A: Physical, 2004, 110(1): 276-281.

[19] B. Torres, I. Payá-Zaforteza, P. A. Calderón, and J. M. Adam, “Analysis of the strain transfer in a new FBG sensor for structural health monitoring,” Engineering Structures, 2011, 33(2): 539-548.

[20] X. F. Yang, S. J. Luo, Z. H. Chen, J. H. Ng, and C. Lu, “Fiber Bragg grating strain sensor based on fiber laser,” Optics Communications, 2007, 271(1): 203-206.

[21] S. C. Tao, X. P. Dong, and B. W. Lai, “Temperature-insensitive fiber Bragg grating displacement sensor based on a thin-wall ring,” Optics Communications, 2016, 372: 44-48.

[22] J. P. He, Z. Zhou, and J. P. Ou, “Simultaneous measurement of strain and temperature using a hybrid local and distributed optical fiber sensing system,” Measurement, 2014, 47(1): 698-706.

[23] S. M. Wang, Y. J. Chiang, and L. Wang, “New structure for multipoint temperature-independent strain sensing system employing optical power detection scheme,” Optical Fiber Technology, 2008, 14(2): 167-171.

[24] J. Yang, Y. Zhao, B. J. Peng, and X. Wan, “Temperature-compensated high pressure FBG sensor with a bulk-modulus and self-demodulation method,” Sensors & Actuators A: Physical, 2005, 118(2): 254-258.

[25] W. T. Zhang, F. Li, and Y. L. Liu, “FBG pressure based on the double shell cylinder with tempersensorature compensation,” Measurement, 2009, 42(3): 408-411.

[26] G. Allwood, G. Wild, A. Lubansky, and S. Hinckley, “A highly sensitive fiber Bragg grating diaphragm pressure transducer,” Optical Fiber Technology, 2015, 25: 25-32.

[27] V. R. Pachava, S. Kamineni，S. S. Madhuvarasu, and K. Putha, “A high sensitive FBG pressure sensor using thin metal diaphragm,” Journal of Optics, 2014, 43(2): 117-121.

[28] H. Bao, X. Dong, C. Zhao, L. Y. Shao, C. C. Chan, and P. Shum, “Temperature-insensitive FBG tilt with a large measurement range,” Optics sensor Communications, 2009, 283(6): 968-970.

[29] S. Jiang, J. Wang, and Q. Sui, “Distinguishable circumferential inclined direction tilt sensor based on fiber Bragg grating with wide measuring range and high accuracy,” Optics Communications, 2015, 355: 58-63.