[1] Thumm M.State-of-the-art of high power gyro-devices and free electron masers update 1999,Scientific Report FZKA 6418,Forschungszentrum Karlsruhe,Germany,2000.
[2] Link G,Feher L,Thumm M,et al.Sintering of advanced ceramics using a 30-GHz,10-kW,CW industrial gyrotron,IEEE Trans.Plasma Sci.,1999,27:547-556
[3] Hirota M,Brito M E,Hirao K et al.Microwave sintering of silicon nitride with rare earth sesquioxide additions,ceramic transactions.In:ClarkDE,Sutten WH,Lewis DA,eds,Microwave:Theory and Application in Materials Processing IV,San Diego,USA:ACS Publ.,1997,80:515-522
[4] Bykov Yu V,Goldenberg A L,Flyagin V A.The possibilities of material processing by millimeter wave radiation.In:Snyder Jr.W B,Sutton W H,Johnson D L,eds,Materials Research Society Symposium Proceedings,Pittsburgh,USA:Materials Research Society,1991,189:41-42
[5] Bykov Yu V,Sorokin A A.Millimeter wave applicators for technological gyrotron setups.In:Proceedings of the Second International Workshop on Strong Microwaves in Plasmas,Nizhny Novgorod,Russia,1993:S46
[6] Bykov Yu V,Semenov V E.Processing of material using microwave rediation.In:Gaponov-Grekhov A V Granatstein V L,eds,Applications of High Power Microwaves,Boston:Artech House,1994:319-352
[7] Sklyarevich V,Detkov A,Shevelev M,et al.Interaction between gyrotron radiation and powder materials.In:Beatty R I,Sutton W H,Iskander M F,eds,Materials Research Society Symposium Proceedings,Pittsburgh,USA:Materials Research Society,1992,269:163-169
[8] Kikunaga T,Asano H,Yasojima Y,et al.A 28GHz gyrotron with a permanent magnet system.Int.J.Electronics,1995,79:655-663
[9] Borie E,Jodicke B.Comments on the linear theory of the gyrotron.IEEE Trans.Plasma Sci.,1988,16:116-121.
[10] Liu P-K,Borie E,Kartikeyan M-V.Design of a 24 GHz,30 kW technology gyrotron operating at the second harmonic.In:Liu S,Shen X,eds,25th Int.Conf.Infrared and Millimeter Waves Conf.Dig.,Beijing:IEEE Press,2000:327-328