[1] Semiatin S L 2020 An overview of the thermomechanical processing of α/β titanium alloys: current status and future research opportunities Metall. Mater. Trans. A 51 2593–625

[2] Froes F H and Qian M 2018 Titanium background, alloying behavior and advanced fabrication techniques—an overview Titanium in Medical and Dental Applications ed F H Froes and M Qian (London: Woodhead Publishing) pp 23–37

[3] Kolli R P and Devaraj A 2018 A review of metastable beta titanium alloys Metals 8 506

[4] Banerjee D and Williams J C 2013 Perspectives on titanium science and technology Acta Mater. 61 844–79

[5] Sim K-H, Wang G-F and Kim T J 2018 Status of titanium alloy industry for aviation in the world and development strategy of chinese enterprises Proc. 3rd Int. Conf. on Education, Management and Systems Engineering (Xiamen, China: Science and Engineering Research Center)

[6] Yang H, Gao P F, Fan X G, Li H W, Sun Z C, Li H, Guo L G, Zhan M and Liu Y L 2014 Some advances in plastic forming technologies of titanium alloys Procedia Eng. 81 44–53

[7] Yamane G, Velay V, Vidal V and Matsumoto H 2018 Mechanical behavior of Ti-6Al-2Sn-4Zr-2Mo titanium alloy under hot and superplastic forming conditions: experiment and modeling Defect Diffus. Forum 385 413–8

[8] Mis M et al 2019 Construction of next-generation superplastic forming using additive manufacturing and numerical techniques Proc. Inst. Mech. Eng. B 233 154–65

[9] Velay V, Matsumoto H, Vidal V and Chiba A 2016 Behavior modeling and microstructural evolutions of Ti–6Al–4V alloy under hot forming conditions Int. J. Mech. Sci. 108–9 1–13

[10] Odenberger E L, Pederson R and Oldenburg M 2019 Finite element modeling and validation of springback and stress relaxation in the thermo-mechanical forming of thin Ti-6Al-4V sheets Int. J. Adv. Manuf. Technol. 104 3439–55

[11] Liu J et al 2013 Superplastic-like forming of Ti-6Al-4V alloy Int. J. Adv. Manuf. Technol. 69 1097–104

[12] Sartkulvanich P, Li D, Crist E and Yu K O 2016 Influence of superplastic forming on reduction of yield strength property for Ti-6Al-4V fine grain sheet and Ti-6Al-4V standard Mater. Sci. Forum 838-839 171–6

[13] Wang G F, Jia H H, Gu Y B and Liu Q 2018 Research on quick superplastic forming technology of industrial aluminum alloys for rail traffic Defect Diffus. Forum 385 468–73

[14] Kopec M, Wang K, Politis D J, Wang Y, Wang L and Lin J G 2018 Formability and microstructure evolution mechanisms of Ti6Al4V alloy during a novel hot stamping process Mater. Sci. Eng. A 719 72–81

[15] Wang A, Liu J, Gao H, Wang L-L and Masen M 2017 Hot stamping of AA6082 tailor welded blanks: experiments and knowledge-based cloud – finite element (KBC-FE) simulation J. Mater. Process. Technol. 250 228–38

[16] Dykstra B 2002 Hot metal gas forming for manufacturing vehicle structural components Foreign Locomotive Roll. Stock Technol. 6 12–4

[17] He Z, Fan X, Yang S, Wang C, Liu G and Yuan S 2019 New processes and applications of rapid hot gas forming of light-alloy tubes Proc. 9th Int. Conf. On Tube Hydroforming (TUBEHYDRO 2019) (Kaohsiung, Taiwan, China) pp 11–8

[18] He Z B, Teng B G, Che C Y, Wang Z B, Zheng K L and Yuan S 2012 Mechanical properties and formability of TA2 extruded tube for hot metal gas forming at elevated temperature Trans. Nonferr. Met. Soc. 22 s479–84

[19] Backofen W A, Turner I R and Avery D H 1964 Superplasticity in Al-Zn alloy Trans. Am. Soc. Met. 57 980

[20] Barnes A J 2007 Superplastic forming 40 years and still growing J. Mater. Eng. Perform. 16 440–54

[21] Chatterjee R and Mukhopadhyay J 2018 A review of super plastic forming Mater. Today: Proc. 5 4452–9

[22] Zhang T, Liu Y, Sanders D G, Liu B, Zhang W and Zhou C 2014 Development of fine-grain size titanium 6Al–4V alloy sheet material for low temperature superplastic forming Mater. Sci. Eng. A 608 265–72

[23] Li X, Chen N, Wu H, Chen J and Qu F S 2018 Low-temperature superplastic gas bulging of Ti-55 alloy by hydrogen addition Int. J. Hydrogen Energy 43 12455–9

[24] Matsumoto H, Velay V and Chiba A 2015 Flow behavior and microstructure in Ti-6Al-4V alloy with an ultrafine-grained α-single phase microstructure during low-temperature-high-strain-rate superplasticity Mater. Des. 66 611–7

[25] Zherebtsov S V, Kudryavtsev E A, Salishchev G A, Straumal B B and Semiatin S L 2016 Microstructure evolution and mechanical behavior of ultrafine Ti-6Al-4V during low-temperature superplastic deformation Acta Mater. 121 152–63

[26] Babu J and Dutta A 2015 Low temperature superplasticity through grain refinement in Ti-6Al-4V by a novel route of quench-roll-recrystallise J. Mater. Res. Technol. 4 348–52

[27] Kim D et al 2019 Enhancing superplasticity of ultrafine-grained Ti–6Al–4V without imposing severe plastic deformation Adv. Eng. Mater. 21 1800115

[28] Xu M M 2014 Research on the Formability and Process of TCI and TA15 Titanium Alloy Sheet Metal (Nanjing, China: Nanjing University of Aeronautics and Astronautics)

[29] Ding J J et al 2019 Study on high temperature tensile properties of TC4 titanium alloy sheet Technol. Innov. Appl. 41–2 45

[30] Li K J 2015 Coupled Thermo-Mechanical Finite Element Analysis of Hot Stretch Bending of TC4 Titanium Alloy Sheet (Qinhuangdao: Yanshan University)

[31] Shen F L 2013 Study on Hot Deformation Rule of TA15 Titanium Alloy (Nanjing: Nanjing University of Aeronautics and Astronautics)

[32] Wang J L 2016 High Pressure Gas Forming Laws and Defect Control of Ti-3A1-2. 5V Alloy Tubular Components with Square Cross-Section (Harbin: Harbin Institute of Technology)

[33] Gong Z H 2018 Investigation on the Hot Deformation and the Dynamic Mechanical Behavior of TA32 Titanium Alloy (Nanjing: Nanjing University of Aeronautics and Astronautics)

[34] Wu Y, Wang D, Liu Z and Liu G 2019 A unified internal state variable material model for Ti2AlNb-alloy and its applications in hot gas forming Int. J. Mech. Sci. 164 105126

[35] Liu Z, Li P, Xiong L, Liu T and He L J 2017 High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy Mater. Sci. Eng. A 680 259–69

[36] Luo J and Li M Q 2012 Strain rate sensitivity and strain hardening exponent during the isothermal compression of Ti60 alloy Mater. Sci. Eng. A 538 156–63

[37] Alabort E, Kontis P, Barba D, Dragnevski K and Reed R C 2016 On the mechanisms of superplasticity in Ti–6Al–4V Acta Mater. 105 449–63

[38] Alabort E, Barba D and Reed R 2018 Mechanisms of superplasticity in titanium alloys: measurement, in situ observations and rationalization Defect Diffus. Forum 385 65–71

[39] Zheng K, Zheng J-H, He Z, Liu G, Politis D J and Wang L, 2020 Fundamentals, processes and equipment for hot medium pressure forming of light material tubular components Int. J. Lightweight Mater. Manuf. 3 1–19

[40] Liu G, Wang K, He B, Huang M and Yuan S J 2015 Mechanism of saturated flow stress during hot tensile deformation of a TA15 Ti alloy Mater. Des. 86 146–51

[41] Liu G, Wang J, Dang K and Tang Z J 2014 High pressure pneumatic forming of Ti-3Al-2.5V titanium tubes in a square cross-sectional die Materials 7 5992–6009

[42] Leyens C and Peters M 2003 Titanium and Titanium Alloys (Weinheim: Wiley)

[43] Humphreys F J and Hatherly M 2004 Recrystallization and Related Annealing Phenomena 2nd edn (Amsterdam: Elsevier)

[44] Liu G, Wu Y, Wang J L and Zhang W D 2014 Progress on high pressure pneumatic forming and warm hydroforming of titanium and magnesium alloy tubular components Mater. Sci. Forum 783–6 2456–61

[45] Liu G, Wu Y, Zhao J, Wang K and Yuan S J 2014 Formability determination of titanium alloy tube for high pressure pneumatic forming at elevated temperature Procedia Eng. 81 2243–8

[46] Wu Y, Zhu S and Liu G 2019 Study on formability and fracture of Ti-alloy tube by hot gas bulging tests Proc. 9th Int. Conf. on Tube Hydroforming (TUBEHYDRO 2019) (Kaohsiung, Taiwan, China) pp 44–50

[47] Liu G, Wang J L, Dang K and Yuan S J 2016 Effects of flow stress behaviour, pressure loading path and temperature variation on high-pressure pneumatic forming of Ti-3Al-2.5V tubes Int. J. Adv. Manuf. Technol. 85 869–79

[48] Liu G, Wu Y, Wang J L, Yuan S J and Wang K 2016 Research progress of high pressure gas forming for titanium alloy tubular components J. Netshape Form. Eng. 8 37–42

[49] Yuan S J? Liu W and Xu Y C 2015 New development on technology and equipment of sheet hydroforming J. Mech. Eng. 51 20–28

[50] Yuan S J 2016 Modern Hydroforming Technology 2nd edn (Beijing: National Defense Industry Press) pp 30–1

[51] Wu Y, Liu G, Wang K, Liu Z and Yuan S J 2016 Loading path and microstructure study of Ti-3Al-2.5V tubular components within hot gas forming at 800 ?C Int. J. Adv. Manuf. Technol. 87 1823–33

[52] Liu G, Wu Y, Wang D and Yuan S J 2015 Effect of feeding length on deforming behavior of Ti-3Al-2.5V tubular components prepared by tube gas forming at elevated temperature Int. J. Adv. Manuf. Technol. 81 1809–16

[53] Liu G, Wang K H, Xu Y, Wang B and Yuan S J 2013 An approach to improve thickness uniformity of TA15 tubular part formed by gas bulging process Adv. Mater. Res. 712–5 651–7

[54] Paul A, Werner M, Tr?an R and Landgrebe D 2017 Hot metal gas forming of titanium grade 2 bent tubes AIP Conf. Proc. 1896 050009

[55] Huang K and Log′e R E 2016 A review of dynamic recrystallization phenomena in metallic materials Mater. Des. 111 548–74

[56] Zhao J, Wang K H, Huang K and Liu G 2019 Recrystallization behavior during hot tensile deformation of TA15 titanium alloy sheet with substantial prior deformed substructures Mater. Charact. 151 429–35

[57] Wang K H, Liu G and Huang K 2017 Approach to enhance gas bulging formability of TA15 titanium alloy tube based on dynamic recrystallization Procedia. Eng. 207 2340–5

[58] Wang K H, Liu G, Huang K, D J P and Wang L L 2017 Effect of recrystallization on hot deformation mechanism of TA15 titanium alloy under uniaxial tension and biaxial gas bulging conditions Mater. Sci. Eng. A 708 149–58

[59] Wang K H, Liu G, Zhao J, Huang K and Wang L L 2018 Experimental and modelling study of an approach to enhance gas bulging formability of TA15 titanium alloy tube based on dynamic recrystallization J. Mater. Process. Technol. 259 387–96

[60] Jiao X, Wang D, Yang J, Liu Z and Liu G 2019 Microstructure analysis on enhancing mechanical properties at 750 ?C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming J. Alloys Compd. 789 639–46

[61] Maeno T, Tomobe M, Mori K and Ikeda Y 2018 Hot stamping of titanium alloy sheets using partial contact heating Procedia Manuf. 15 1149–55

[62] Mori K et al 2017 Hot stamping of ultra-high strength steel parts CIRP Ann. 66 755–77

[63] Karbasian H and Tekkaya A E 2010 A review on hot stamping J. Mater. Process. Technol. 210 2103–18

[64] Merklein M, Wieland M, Lechner M, Bruschi S and Ghiotti A 2016 Hot stamping of boron steel sheets with tailored properties: a review J. Mater. Process. Technol. 228 11–24

[65] Zheng K, Politis D J, Wang L and Lin J G 2018 A review on forming techniques for manufacturing lightweight complex—shaped aluminium panel components Int. J. Lightweight Mater. Manuf. 1 55–80

[66] Mohamed M, Foster A, Lin J, Balint D S and Dean T A 2012 Investigation of deformation and failure features in hot stamping of AA6082: experimentation and modelling Int. J. Mach. Tools Manuf. 53 27–38

[67] Wang L, Strangwood M, Balint D, Lin J and Dean T A 2011 Formability and failure mechanisms of AA2024 under hot forming conditions Mater. Sci. Eng. A 528 2648–56

[68] Fan X, He Z-B, Zhou W-X and Yuan S J 2016 Formability and strengthening mechanism of solution treated Al–Mg–Si alloy sheet under hot stamping conditions J. Mater. Process. Technol. 228 179–85

[69] Fan X, He Z, Yuan S and Zheng K L 2013 Experimental investigation on hot forming–quenching integrated process of 6A02 aluminum alloy sheet Mater. Sci. Eng. A 573 154–60

[70] Zhao H-J, Wang B-Y, Liu G, Yang L and Xiao W C 2015 Effect of vacuum annealing on microstructure and mechanical properties of TA15 titanium alloy sheets Trans. Nonferrous Met. Soc. China 25 1881–8

[71] Nakagawa Y, Mori K and Maeno T 2018 Springback-free mechanism in hot stamping of ultra-high-strength steel parts and deformation behaviour and quenchability for thin sheet Int. J. Adv. Manuf. Technol. 95 459–67

[72] Zamzuri H, Ken-Ichiro M, Tomoyoshi M and Yuya Y 2013 Hot stamping of titanium alloy sheet using resistance heating Vestnik Nosov Magnitogorsk State Tech. Univ. 5 12–5

[73] Tamirisakandala S, Bhat R B, Miracle D B, Boddapati S, Bordia R, Vanover R and Vasudevan V K 2005 Effect of boron on the beta transus of Ti-6Al-4V alloy Scr. Mater. 53 217–22

[74] Moyer J M and Ansell G S 1975 The volume expansion accompanying the martensite transformation in iron-carbon alloys Metall. Trans. A 6 1785–91

[75] El Fakir O, Wang L L, Balint D, Dear J P, Lin J G 2014 Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA5754 Int. J. Mach. Tools Manuf. 87 39–48

[76] Homporov′a P, Poletti C, Stockinger M and Warchomicka F 2011 Dynamic phase evolution in titanium alloy Ti-6Al-4V Proc. 12th World Conf. on Titanium. (Beijing, China: The Nonferrous Metals Society of Chinna) pp 737–40

[77] Maeno T, Mori K I and Unou C 2014 Improvement of die filling by prevention of temperature drop in gas forming of aluminium alloy tube using air filled into sealed tube and resistance heating Procedia Eng. 81 2237–42

[78] Maeno T, Mori K and Adachi K 2014 Gas forming of ultra-high strength steel hollow part using air filled into sealed tube and resistance heating J. Mater. Process. Technol. 214 97–105

[79] Tang Z J, Chen J, Dang K X, Liu G, and Tao K M 2019 Experimental investigation into the electropulsing assisted pulsating gas forming of CP-Ti tubes J. Mater. Process. Technol. 278 116492

[80] Wang G F et al 2015 Current assisted superplastic forming of titanium alloy MATEC Web Conf. 21 04001

[81] Yang J L, Wang G F, Zhao T, Li Y, and Liu Q 2018 Study on the experiment and simulation of titanium alloy bellows via current-assisted forming technology JOM 70 1118–23

[82] Song H, Wang Z J and Gao T J 2007 Effect of high density electropulsing treatment on formability of TC4 titanium alloy sheet Trans. Nonferrous Met. Soc. China 17 87–92

[83] Ao DW, Chu XR, Yang Y, Lin S and Gao J 2018 Effect of electropulsing treatment on microstructure and mechanical behavior of Ti-6Al-4V alloy sheet under argon gas protection Vacuum 148 230–8

[84] Maeno T, Yamashita Y and Mori K I 2016 Hot stamping of titanium alloy sheets into u shape with concave bottom and joggle using resistance heating Key Eng. Mater. 716 915–22

[85] Ozturk F, Ece R E, Polat N, Koksal A, Evis Z and Sheikh-Ahmad J Y 2016 Application of electric resistance heating method on titanium hot forming at industrial scale Arab. J. Sci. Eng. 41 4441–8