[1] Malvick A J. Theoretical elastic deformations of the steward observatory 230 cm and the optical sciences center 154 cm mirrors[J]. Appl Opt, 1972, 11(3): 575-585.

[2] Wu Qingwen, Lu E, Wa Jiaqi, et al.. Study on the surface figure changes of primary mirror centerally supported under gravity load [J]. Optics and Precision Engineering, 1996 , 4(4): 23-28.

[3] Zhang Dejiang, Liu Liren, Xu Rongwei, et al.. Finite element analysis for wavefront error of lenses induced by gravity[J]. Acta Optica Sinica, 2005, 25(4): 538-541.

[4] P R Yoder. Opto-Mechanical Systems Design[M]. Boca Raton：The Chemical Rubber Company Press, 2006: 460-461.

[5] Cho M K，Price R S，Moon I K. Optimization of the ATST primarymirror support system[C]. SPIE, 2006, 6273: 63731E.

[6] Fan Lili, Zhang Jingxu, Jiang Hao, et al.. Design of the primary mirror supportof equatorial telescope[J]. Infrared and Laser Engineering, 2011, 40(3): 476-479.

[7] Wang Xiangjing, Chen Jiexiang, Zhang Yi, et al.. The application of APDL and UIDL in the primary mirror support optimization[J]. Machinery Design & Manufacture, 2009(11): 86-87.

[8] Lei Jiang，Jiang Shilei，Cheng Gang. Deformation of high-accuracy photo lithographic objective lens[J]. Opto-Electronic Engineering, 2005, 32(2): 12-14.

[9] Tan FanJiao, Qiao YanFeng, Li YaoBin, et al.. FEM mechanical analysis for primary mirror self-weight deformation of photo-electronic theodolite[J]. Optical Instruments, 2007, 29(6): 65-68.

[10] Tian Wei, Wang Ping, Wang Rudong, et al.. Simulation and experimental research of 193 nm projection lithography lens supporting[J]. Chinese J Lasers, 2012, 39(8): 0816002 .

[11] Slocum A. Kinematics couplings are view of design principles and application[J]. Int J Mach Tools & Manuf, 2010, 50(4): 310-327.

[12] Wang Ping, Tian Wei, Wang Rudong, et al.. Rotating chuck lest for removing chuck error of optical surface[J]. Acta Optica Sinica, 2011, 31(8): 0812004.

[13] Wang Wugui, Fu Mingfu. Advances in the research of nonlinear theory of moderately thick shells[J]. Journal of Nanchang University (Engineering & Technology), 2000, 22(1): 10-16.

[14] Wang Rudong, Wang Ping, Tian Wei, et al.. Design and analysis of compensation of large aperture optical element for gravity deformation [J]. Chinese Optics, 2011, 4(3): 260-264.

[16] Culpepper M L，Kartik M V，Dibiasio C. Design of integrated eccentric mechanisms and exact constraint fixtures for micro-level repeatability and accuracy[J]. Precis Engng, 2005, 29(1): 65-80.

[17] Chen Xu，Yuan Wenquan, Feng Yutao, et al.. Study of the error of the reference lens in absolute spherical testing and the thermal deformation model establishment[J]. Acta Optica Sinica, 2011, 31(2): 0212002.

[18] Wang Baoxu. Optomechanical Structure Design and Analysis for Large Aperture Reference Spherical Lens[D]. Beijing：University of Chinese Academy of Sciences, 2010, 37(8): 2029-2034.

[19] Zhang Yanwei, Su Dongqi, Sui Yongxin, et al.. Absolute testing of rotationally asymmetric surface deviation with the method of rotationaveraging and compensation[J]. Chinese J Lasers, 2014, 41(7): 0708007.

[20] Miao Erlong, Zhang Jian, Gu Yongqiang, et al.. Measurement error analysis of high precision Fizeau interferometer for lithography projection objective[J]. Chinese J Lasers, 2010, 37(8): 2029-2034.