Microstructure Evolution and Wear Resistance Enhancement of H13 Steel Powder Repaired 45 Steel Using Laser Composite Remanufacturing

Ziqi Luo; Changyu Wang; Zhao Wang; Fubing Lin; Jinzhong Lu; Kaiyu Luo

doi:10.3788/CJL231187

[1] Karimbaev R, Choi S, Pyun Y S et al. Mechanical and tribological characteristics of cladded AISI 1045 carbon steel[J]. Materials, 13, 859(2020).

[2] Naeem M, Torres A V R, Serra P L C et al. Combined plasma treatment of AISI-1045 steel by hastelloy deposition and plasma nitriding[J]. Journal of Building Engineering, 47, 103882(2022).

[3] Dai M Y, Li C Y, Chai Y T et al. Rapid salt bath nitriding of steel AISI 1045[J]. Metal Science and Heat Treatment, 60, 454-456(2018).

[4] Wongpanya P, Saramas Y, Chumkratoke C et al. Erosion-corrosion behaviors of 1045 and J55 steels in crude oil[J]. Journal of Petroleum Science and Engineering, 189, 106965(2020).

[5] Esteves Correia A, Paulo Davim J. Surface roughness measurement in turning carbon steel AISI 1045 using wiper inserts[J]. Measurement, 44, 1000-1005(2011).

[6] Nasirpouri F, Mostafaei A, Fathyunes L et al. Assessment of localized corrosion in carbon steel tube-grade AISI 1045 used in output oil-gas separator vessel of desalination unit in oil refinery industry[J]. Engineering Failure Analysis, 40, 75-88(2014).

[7] Zabeen S, Preuss M, Withers P J. Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth[J]. Acta Materialia, 83, 216-226(2015).

[8] King A, Steuwer A, Woodward C et al. Effects of fatigue and fretting on residual stresses introduced by laser shock peening[J]. Materials Science and Engineering: A, 435/436, 12-18(2006).

[9] Montross C S, Wei T, Ye L et al. Laser shock processing and its effects on microstructure and properties of metal alloys: a review[J]. International Journal of Fatigue, 24, 1021-1036(2002).

[10] Luo S H, He W F, Chen K et al. Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening[J]. Journal of Alloys and Compounds, 750, 626-635(2018).

[11] Lu H F, Wu L J, Wei H L et al. Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening[J]. Additive Manufacturing, 55, 102877(2022).

[12] Lourenço J M, Sun S D, Sharp K et al. Fatigue and fracture behavior of laser clad repair of AerMet® 100 ultra-high strength steel[J]. International Journal of Fatigue, 85, 18-30(2016).

[13] Sun S D, Liu Q C, Brandt M et al. Effect of laser clad repair on the fatigue behaviour of ultra-high strength AISI 4340 steel[J]. Materials Science and Engineering: A, 606, 46-57(2014).

[14] Yap C Y, Chua C K, Dong Z L et al. Review of selective laser melting: materials and applications[J]. Applied Physics Reviews, 2, 041101(2015).

[15] Zhou C Y, Zhao S S, Wang Y B et al. Mitigation of pores generation at overlapping zone during laser cladding[J]. Journal of Materials Processing Technology, 216, 369-374(2015).

[16] Chew Y, Pang J H L, Bi G J et al. Effects of laser cladding on fatigue performance of AISI 4340 steel in the as-clad and machine treated conditions[J]. Journal of Materials Processing Technology, 243, 246-257(2017).

[17] Zhou G N, Zhu W X, Shen H et al. Real-time microstructure imaging by Laue microdiffraction: a sample application in laser 3D printed Ni-based superalloys[J]. Scientific Reports, 6, 28144(2016).

[18] Zhang Q, Chen J, Tan H et al. Influence of solution treatment on microstructure evolution of TC21 titanium alloy with near equiaxed β grains fabricated by laser additive manufacture[J]. Journal of Alloys and Compounds, 666, 380-386(2016).

[19] Lu J Z, Cao J, Lu H F et al. Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding[J]. Surface & Coatings Technology, 369, 228-237(2019).

[20] Mumtaz K A, Erasenthiran P, Hopkinson N. High density selective laser melting of Waspaloy®[J]. Journal of Materials Processing Technology, 195, 77-87(2008).

[21] Vilaro T, Colin C, Bartout J D. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting[J]. Metallurgical and Materials Transactions A, 42, 3190-3199(2011).

[22] Mahagaonkar S B, Brahmankar P K, Seemikeri C Y. Effect of shot peening parameters on microhardness of AISI 1045 and 316L material: an analysis using design of experiment[J]. The International Journal of Advanced Manufacturing Technology, 38, 563-574(2008).

[23] Wang Z B, Tao N R, Li S et al. Effect of surface nanocrystallization on friction and wear properties in low carbon steel[J]. Materials Science and Engineering: A, 352, 144-149(2003).

[24] Zhou L, Liu G, Han Z et al. Grain size effect on wear resistance of a nanostructured AISI52100 steel[J]. Scripta Materialia, 58, 445-448(2008).

[25] Wu B, Wang P P, Pyoun Y S et al. Effect of ultrasonic nanocrystal surface modification on the fatigue behaviors of plasma-nitrided S45C steel[J]. Surface and Coatings Technology, 213, 271-277(2012).

[26] Sun J Y, Mao X Y, Yang Z et al. Effect of gradient microstructure on wear behavior of carbon steel[J]. Materials Research Express, 6, 126566(2019).

[27] Mao X Y, Sun J Y, Feng Y Y et al. High-temperature wear properties of gradient microstructure induced by ultrasonic impact treatment[J]. Materials Letters, 246, 178-181(2019).

[28] Zhang X Y, Huang S, Li D C et al. An approach to improve the microstructure and mechanical properties: a hybrid manufacturing of laser directed energy deposition and shot peening[J]. Additive Manufacturing, 55, 102-686(2022).

[29] Donoghue J, Sidhu J, Wescott A et al. Integration of deformation processing with additive manufacture of Ti-6A1-4V components for improved β grain structure and texture[C], 437-444(2015).

[30] Deng W W, Wang C Y, Lu H F et al. Progressive developments, challenges and future trends in laser shock peening of metallic materials and alloys: a comprehensive review[J]. International Journal of Machine Tools and Manufacture, 191, 104061(2023).

[31] Bian H R, Wang Z, Liu J J et al. Laser shock wave-induced enhanced thermal corrosion resistance of Ti6Al4V alloy fabricated by laser powder bed fusion[J]. Surface and Coatings Technology, 452, 129096(2023).

[32] Wang Z, Zhou W T, Luo K Y et al. Strengthening mechanism in thermomechanical fatigue properties of Ti6Al4V titanium alloy by laser shock peening[J]. International Journal of Fatigue, 172, 107631(2023).

[33] Wang Z, Bian H R, Lu H F et al. Significant improvement in the strength-toughness and isotropy of laser powder bed fused Ti6Al4V alloy by combining heat treatment with subsequent laser shock peening[J]. Materials Science and Engineering: A, 880, 145365(2023).

[34] Wang Z, Lu H F, Cai J et al. Improvement mechanism in stress corrosion resistance of the X70 pipeline steel in hydrogen sulfide solution by massive laser shock peening treatment[J]. Corrosion Science, 201, 110293(2022).

[35] Lu H F, Xue K N, Xu X et al. Effects of laser shock peening on microstructural evolution and wear property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool steel[J]. Journal of Materials Processing Technology, 291, 117016(2021).

[36] Hackel L, Rankin J R, Rubenchik A et al. Laser peening: a tool for additive manufacturing post-processing[J]. Additive Manufacturing, 24, 67-75(2018).

[37] Lan L, Jin X Y, Gao S et al. Microstructural evolution and stress state related to mechanical properties of electron beam melted Ti-6Al-4V alloy modified by laser shock peening[J]. Journal of Materials Science & Technology, 50, 153-161(2020).

[38] Chi J X, Cai Z Y, Zhang H P et al. Combining manufacturing of titanium alloy through direct energy deposition and laser shock peening processes[J]. Materials & Design, 203, 109626(2021).

[39] Guo Y, Wang S R, Liu W T et al. Effect of laser shock peening on tribological properties of magnesium alloy ZK60[J]. Tribology International, 144, 106138(2020).

[40] Luo K Y, Jing X, Sheng J et al. Characterization and analyses on micro-hardness, residual stress and microstructure in laser cladding coating of 316L stainless steel subjected to massive LSP treatment[J]. Journal of Alloys and Compounds, 673, 158-169(2016).

[41] Tong Z P, Wan W B, Liu H L et al. Combination of annealing and laser shock peening for tailoring microstructure and mechanical properties of laser directed energy deposited CrMnFeCoNi high-entropy alloy[J]. Additive Manufacturing, 61, 103345(2023).

[42] Li N, Wang Q, Niu W J et al. Effects of multiple laser shock peening impacts on microstructure and wear performance of wire-based laser directed energy deposition 17-4PH stainless steel[J]. Journal of Materials Research and Technology, 25, 3222-3227(2023).

[43] Zhu L D, Wang S H, Pan H C et al. Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology[J]. Journal of Manufacturing Processes, 49, 344-354(2020).

[44] Wang C Y, Luo K Y, Cai J et al. Obvious improvement in electrochemical and long-term immersion corrosion resistance of AISI 420 martensitic stainless steel using laser shock peening[J]. Corrosion Science, 209, 110688(2022).

[45] Wang C Y, Luo K Y, Bu X Y et al. Laser shock peening-induced surface gradient stress distribution and extension mechanism in corrosion fatigue life of AISI 420 stainless steel[J]. Corrosion Science, 177, 109027(2020).

[46] Wang C Y, Luo K Y, Wang J et al. Carbide-facilitated nanocrystallization of martensitic laths and carbide deformation in AISI 420 stainless steel during laser shock peening[J]. International Journal of Plasticity, 150, 103191(2022).

[47] Sanaty-Zadeh A. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect[J]. Materials Science and Engineering: A, 531, 112-118(2012).

[48] Luo P, McDonald D T, Xu W et al. A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing[J]. Scripta Materialia, 66, 785-788(2012).

[49] Archard J F. Contact and rubbing of flat surfaces[J]. Journal of Applied Physics, 24, 981-988(1953).