• Acta Optica Sinica
  • Vol. 23, Issue 11, 1311 (2003)
[in Chinese]1、*, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]2, [in Chinese]2, [in Chinese]3, and [in Chinese]3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    DOI: Cite this Article Set citation alerts
    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. The Influence of Pumping Configuration in Hybrid Raman Fiber Amplifier on Its Performance[J]. Acta Optica Sinica, 2003, 23(11): 1311 Copy Citation Text show less

    Abstract

    The performance of forward-and backward-pumped Raman fiber amplifier/erbium doped fiber amplifier(EDFA) hybrid amplifiers was experimentally compared. 75 km standard single mode fiber(SSMF) was employed as the transmission line. 20 channels in C-band with a total power of -2.86 dBm, ranging from 1537.377 to 1560.605 nm on the ITU-T grid were used as the incident signals of hybrid amplifiers. Each channel was modulated by an electro-absorption(EA) modulator using a 2.5 Gb/s nonreturn-to-zero(NRZ) format, with a 27-1 long pseudo-random bit sequence(PRBS) signal. Experimental results have suggested some of relative merits of forward-pumped RFA/EDFA hybrid amplifiers. The improvement of noise figure(NF) arranged from 2.24 dB to 6.55 dB. The gain increase was higher than 5 dB for any channel in forward-pumped hybrid amplifiers in comparison with backward-pumped hybrid amplifiers. However, the optical signal-to-noise ratio(OSNR) is higher than 26.9 dB in either pumped configuration for hybrid amplifiers.
    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. The Influence of Pumping Configuration in Hybrid Raman Fiber Amplifier on Its Performance[J]. Acta Optica Sinica, 2003, 23(11): 1311
    Download Citation