Secondary development of Ansys to the infrared diagnosis of irregular inner-wall surface defect of complex material based on inverse heat conduction problem

Lv Shigui; Yang Zaiqing; Cong Shuquan

doi:10.3788/irla201645.1204002

[1] Li Guohua, Wu Lixin, Wu Miao, et al. Current status and applications of infrared thermography[J]. Infrared and Laser Engineering, 2004, 33(3): 227-230. (in Chinese)

[2] Lv Shigui, Yang Li, Yang Qian. Research on the applications of infrared technique in the diagnosis and prediction of diesel engine exhaust fault[J]. Journal of Thermal Science, 2011, 20(2): 189-194.

[3] Maldague X P. Theory and Practice of Infrared Technology for Nondestructive Testing[M]. US: John Wiley & Sons Inc, 2001.

[4] Dai Jingmin, Wang Zijun. Infrared thermography nondestructives testing technology and its applications[J].Techniques of Automation and Application, 2007, 26(1): 1-7. (in Chinese)

[5] Yu Hui, Guan Ronghua. Feasibility to the theory of diagnosis defects in equipment inner wall by means of infrared technique[J]. Infrared and Laser Engineering, 2002, 31(3): 229-232. (in Chinese)

[6] Li Bin, Liu Linhua. An algorithm for geometry boundary identification of heat conduction problem based on boundary element discretization[J]. Proceedings of the CSEE, 2008, 28(20): 38-43. (in Chinese)

[7] Fan Chunli, Zhang Mingxing, Hu Shuangxi. Identification of plate surface geometry: a numerical and experimental study[J]. Numerical Heat Transfer, Part B, 2012, 61(1): 50-70.

[8] Lv Shigui, Yang Li, Fan Chunli, et al. Chaos-LM hybrid algorithm for the defect identification with opposite-side thermographic testing[J]. Journal of Engineering Thermophysics, 2013, 34(7): 1352-1356. (in Chinese)

[9] Huang C H, Ozisik M N. Inverse problem of determining unknown wall heat flux in laminar flow through a parallel plate Duct[J]. Numerical Heat Transfer. Part A, 1992, 21(1): 55-70.

[10] Huang C H, Chao B H. An inverse geometry problem in identifying irregular boundary configurations[J]. International Journal of Heat and Mass Transfer, 1997, 40(9): 2045-2053.

[11] Wang Song, Liu Lijuan, Dong Chunmin, et al. Finite Element Analysis Theory and Application with Ansys(Third edition)[M]. 3th ed. Beijing: Publishing House of Electronics Industry, 2008. (in Chinese)

[12] Inagki T, Ishii T, Iwamoto T. On the NDT and E for the diagnosis of defects using infrared thermography[J]. NDT & E International, 1999, 32(5): 247-257.

[13] Fan Chunli, Sun Fengrui, Yang Li. A new quantitative thermographic identification method of subsurface defect for infrared sensor system[J]. Journal of Electron Devices, 2006, 29(3): 878-882. (in Chinese)