Anti-Frosting Method for Primary Mirror Film Coating of Large Astronomical Telescope in Antarctica

[in Chinese]; [in Chinese]; [in Chinese]

doi:10.3788/aos201737.0431002

[1] Masciadri E, Lascaux F, Turchi A, et al. Optical turbulence: Site selection above the internal Antarctic plateau with a mesoscale model［C］. SPIE, 2010, 7733: 77334F.

[2] Pei C, Chen H L, Yuan X Y, et al. Development of automated small telescopes as Dome A site testing DIMM［C］. SPIE, 2010, 7733: 77334W.

[3] Lu Haiping, Yuan Xiangyan, Zhang Kaiyuan. Infrared background radiation removing design and simulation of Antarctic survey telescope［J］. Acta Optica Sinica, 2014, 34(11): 1122002.

[4] Cui X Q, Yuan X Y, Gong X F. Antarctic Schmidt telescopes (AST3) for Dome A［C］. SPIE, 2008, 7012: 70122D.

[5] Yuan X Y, Cui X Q, Gu B Z, et al. The AST3 project: Antarctic survey telescopes for Dome A［C］. SPIE, 2014, 9145: 91450F.

[6] Zhu Y T, Wang L F, Yuan X Y, et al. Kunlun dark universe survey telescope［C］. SPIE, 2014, 9145: 91450E.

[7] Wang Jieteng. Theoretical and experimental study on frosting phenomenon on the cold surface［D］. Beijing: Beijing University of Technology, 2008.

[8] Liu Zhongliang, Huang Lingyan, Gou Yujun, et al. A review on frost formation and anti-frosting technology［J］. Journal of Refrigeration, 2010, 31(4): 1-13.

[9] Yuan X Y, Cui X Q, Liu G R, et al. Chinese small telescope array (CSTAR) for Antarctic Dome A［C］. SPIE, 2008, 7012: 70124G.

[10] Zhao J L, Wang D X, Yuan X Y, et al. The design of mirror′s temperature control system of three Antarctic Schmidt telescopes［C］. SPIE, 2010, 7658: 765815.

[11] Zhang K Y, Li Z Y, Yuan X Y, et al. Mirror seeing of the Antarctic survey telescope［J］. Advances in Polar Science, 2014, 25(3): 133-137.

[12] Yuan X Y, Cui X Q, Gong X F, et al. Progress of Antarctic Schmidt telescopes (AST3) for Dome A［C］. SPIE, 2010, 7733: 77331V.

[13] Bae J W, Kim J S, Yeom G Y. Indium-tin-oxide thin film deposited by a dual ion beam assisted e-beam evaporation system［J］. Nuclear Instruments and Methods in Physics Research B, 2001, 178(1-4): 311-314.

[14] Meng L J, Gao J S, Silva R A, et al. Effect of the oxygen flow on the properties of ITO thin films deposited by ion beam assisted deposition (IBAD)［J］. Thin Solid Films, 2008, 516(16): 5454-5459.

[15] Liu C, Mihara T, Matsutani T, et al. Preparation and characterization of indium tin oxide films formed by oxygen ion beam assisted deposition［J］. Solid State Communications, 2003, 126(9): 509-513.

[16] Meng L J, Gao J S, dos Santos M P, et al. The effect of the ion beam energy on the properties of indium tin oxide thin films prepared by ion beam assisted deposition［J］. Thin Solid Films, 2008, 516(7): 1365-1369.

[17] Liu C, Matsutani T, Asanuma T, et al. Structural, electrical and optical properties of indium tin oxide films prepared by low-energy oxygen-ion-beam assisted deposition［J］. Nuclear Instruments and Methods in Physics Research B, 2003, 206: 348-352.

[18] Kim D, Kim S. Effect of ion beam energy on the electrical, optical, and structural properties of indium tin oxide thin films prepared by direct metal ion beam deposition technique［J］. Thin Solid Films, 2002, 408(1-2): 218-222.