Analysis of temperature field model in optic-electric composite submarine cable and its applications in online monitoring

Xu Zhiniu; Hu Zhiwei; Zhao Lijuan; Li Yongqian; Zhang Yi; Hu Shixun

doi:10.3788/irla201847.0717003

[1] Orton H. Power cable technology review[J]. High Voltage Engineering, 2015, 41(4): 1057-1067.

[2] Li Wei, Wu Linlin, Zhang Xing, et al. Research progress in aging and evaluation of XLPE cable[J]. Insulating Materials, 2016, 49(11): 36-44. (in Chinese)

[3] Xu Jun, Wang Xiaodong, Ouyang Benhong, et al. Effect of thermal aging on physical and chemical structure of XLPE cable insulation [J]. Insulating Materials, 2013, 46(2): 33-37. (in Chinese)

[4] International Electrotechnical Commission. IEC60287-1 Calculation of the current rating-part 1: current rating equations (100% load factor) and calculation of losses [S]. 2006: 11-25.

[5] Wang Youyuan, Chen Rengang, Chen Weigen, et al. Calculation of static temperature field of buried cable based on FEM and analysis of influential factors [J]. High Voltage Engineering, 2009, 35(12): 3086-3092. (in Chinese)

[6] Karahan M, Kalenderli O. Coupled Electrical and Thermal Analysis of Power Cables Using Finite Element Method [M]. US: InTech, 2011: 206-230.

[7] Lv Anqiang. Research on condition monitoring of optical fiber composite submarine power cable based on bistributed strain and temperature sensing technology using optical fiber [D]. Beijing: North China Electric Power University, 2015: 57-61. (in Chinese)

[8] Worzyk T. Submarine Power Cables: Design, Installation, Repair, Environmental Aspects [M]. Berlin: Springer Science & Business Media, 2009.

[9] Naskar A K, Bhattacharya N K, Saha S, et al. Thermal analysis of underground power cables using two dimensional finite element method [C]//2013 International Conference on Condition Assessment Techniques in Electrical Systems, IEEE, 2014, 2: 94-99.

[10] Toliyat H A, Nandi S, Choi S, et al. Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis [M]. Abingdon: Taylor & Francis, 2012.

[11] Zhao Lijuan, Li Yongqian, Xu Zhiniu, et al. Online monitoring system of 110 kV submarine cable based on BOTDR [J]. Sensors and Actuators A: Physical, 2014, 216(3): 28-35.

[12] Lv Anqiang, Li Yongqian, Li Jing, et al. Strain and temperature monitoring of 110 kV optical fiber composite submarine power cable based on Brillouin optical time domain reflectometer [J]. High Voltage Engineering, 2014, 40(2): 533-539. (in Chinese)

[13] Zhao Lijuan, Li Yongqian, Xu Zhiniu. Influence of optimization model on parameter extraction in Lorentzian Brillouin scattering spectrum[J]. Infrared and Laser Engineering, 2016, 45(5): 0522002. (in Chinese)

[14] Baazzim M S, Alsaud M S, Elkady M A. Comparison of finite-element and IEC methods for cable thermal analysis under various operating environments [J]. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 2014, 8(3): 470-475.

[15] Mecheri Y, Boukezzi L, Boubakeur A, et al. Dielectric and mechanical behavior of cross-linked polyethylene under thermal aging[C]//2000 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, IEEE, 2000: 884022.

[16] Soma K, Aihara M, Kataoka Y. Diagnostic method for power cable insulation[J]. IEEE Transactions on Electrical Insulation, 1986, 21(6): 1027-1032.

[17] Zhang Hailong. 110-220 kV XLPE cable insulation on-line monitoring technique [D]. Wuhan: Wuhan University, 2009. (in Chinese)

[18] Wang Hongxin, Cheng Shukang, Wen Xishan, et al. AC insulation characteristics of XLPE in the course of aging [J]. High Voltage Engineering, 2005, 31(3): 7-9. (in Chinese)