Global Sensitivity Analysis of Uplink Steady-State Thermal Blooming for a Collimated Beam

Xiaowei Chen; Xuebin Li; Heli Wei; Congming Dai; Tao Luo; Wenyue Zhu; Ningquan Weng

doi:10.3788/AOS201838.1001001

Journals >Acta Optica Sinica >Volume 38 >Issue 10 >Page 1001001 > Article

Acta Optica Sinica
Vol. 38, Issue 10, 1001001 (2018)

Global Sensitivity Analysis of Uplink Steady-State Thermal Blooming for a Collimated Beam

Xiaowei Chen^1、2、*, Xuebin Li¹, Heli Wei¹, Congming Dai¹, Tao Luo¹, Wenyue Zhu¹, and Ningquan Weng^1、3、*

Author Affiliations

¹ Key Laboratory of Atmospheric Optics, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei, Anhui 230031, China

² Science Island Branch of Graduate School, University of Science and Technology of China, Hefei, Anhui 230031, China

³ School of Environmental Science and Optoelectronic Technology, University of Science and Technology of China, Hefei, Anhui 230026, China

show less

DOI: 10.3788/AOS201838.1001001 Cite this Article Set citation alerts

Xiaowei Chen, Xuebin Li, Heli Wei, Congming Dai, Tao Luo, Wenyue Zhu, Ningquan Weng. Global Sensitivity Analysis of Uplink Steady-State Thermal Blooming for a Collimated Beam[J]. Acta Optica Sinica, 2018, 38(10): 1001001 Copy Citation Text

show less

Profiles of parameters and their uncertainty range. (a) Atmospheric absorption coefficient; (b) atmospheric scattering coefficient; (c) measured wind speed; (d) temperature

Fig. 1. Profiles of parameters and their uncertainty range. (a) Atmospheric absorption coefficient; (b) atmospheric scattering coefficient; (c) measured wind speed; (d) temperature

Download full size

Fig. 2. Mean value μ of the absolute values and standard deviation Σ of the distribution of the elementary effects calculated via EET. (a) 0<μ<250; (b) 0<μ<10

Download full size

Fig. 3. Results of main effects and total effects calculated via VBSA

Download full size

Fig. 4. Convergence analysis of the mean values of absolute elementary effects calculated by EET

Download full size

Factor	S_i	S_T_i	S_T_i-S_i		Factor	S_i	S_T_i	S_T_i-S_i
α₀	0.17	0.25		0.08	σ₂	0.00	0.06	0.06
α₁	0.57	0.62	0.05		σ₃	0.00	0.05	0.05
α₂	0.08	0.16	0.08		v₀	-0.00	0.06	0.06
α₃	0.02	0.07	0.05		v₁	0.03	0.09	0.06
α₄	0.00	0.06	0.06		v₂	-0.00	0.06	0.06
α₅	-0.00	0.06	0.06		v₃	0.00	0.05	0.05
α₆	0.00	0.05	0.05		v₄	0.00	0.06	0.06
α₇	0.00	0.05	0.05		T₁	0.00	0.05	0.05
σ₀	0.02	0.09	0.07		T₂	0.00	0.05	0.05
σ₁	0.04	0.10	0.06		T₃	0.00	0.05	0.05

Table 1. Main effects and total effects of each input factors obtained by VBSA method

Download Citation

Set citation alerts for the article

Tools

Set citation alerts for the article

Save the article for my favorites

Paper Information