Recent Developments in Fiber Optic Spectral White-Light Interferometry

[in Chinese]; [in Chinese]

doi:10.1007/s13320-010-0014-z

[1] B. Lee, “Review of the present status of optical fiber sensors,” Optical Fiber Technology, vol. 9, no. 2, pp. 57-79, 2003.

[2] F. Depiereux, N. Konig, T. Pfeifer, and R. Schmitt, “Fiber-based white-light interferometer with improved sensor tips and stepped mirror,” IEEE Transactions on Instrumentation and Measurement, vol. 56, no. 6, pp. 2279-2283, 2007.

[3] Y. Chen and H.F. Taylor, “Multiplexed fiber Fabry-Perot temperature sensor system using white-light interferometry,” Optics Letters, vol. 27, no. 11, pp. 903-905, 2002.

[4] L. B. Yuan, L. M. Zhou, W. Jin, and C. C. Chan, “Recent progress of white light interferometric fiber optic strain sensing techniques,” Review of Scientific Instruments, vol. 71, no. 12, pp. 4648-4654, 2000.

[5] V. Bhatia, K. A. Murphy, R. O. Claus, T. A. Tran, and J. A. Greene, “Recent developments in optical-fiber-based extrinsic Fabry-Perot interferometric strain sensing technology,” Smart Material and Structures, vol. 4, no. 4, pp. 246-251, 1995.

[6] J. S. Leung and A. Asundi, “Real-time cure monitoring of smart composite material using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors,” Smart Material and Structures, vol. 11, no. 2, pp. 249-255, 2002.

[7] C. Boulet, M. Hathaway, and D. A. Jackson, “Fiber-optic-based absolute displacement sensor at 1500 nm by means of channeled spectrum signal recovery,” Optics Letters, vol. 29, no. 14, pp. 1602-1604, 2004.

[8] B. Yu, A. Wang, G. Pickrell, and J. Xu, “Tunable-optical-filter-based white-light interferometry for sensing,” Optics Letters, vol. 30, no. 12, pp. 1452-1454, 2005.

[9] Y. Jiang, “High-resolution interrogation technique for fiber optic extrinsic Fabry-Perot interferometric sensors by peak-to-peak method,” Applied Optics, vol. 47, no. 6, pp. 925-932, 2008.

[10] V. Bhatia, M.B. Sen, K.A. Murphy, and R.O. Claus, “Wavelength-tracked white light interferometry for highly sensitive strain and temperature measurements,” Electron. Lett., vol. 32, no. 3, pp. 247-249, 1996.

[11] Y. J. Rao, Z. L. Ran, X. Liao, and H. Y. Deng, “Hybrid LPFG/MEFPI sensor for simultaneous measurement of high-temperature and strain,” Optics Express, vol. 15, no. 22, pp. 14936-14941, 2007.

[12] Y. J. Rao, X. J. Wang, T. Zhu, and C. X. Zhou, “Demodulation algorithm for spatial-frequency-division-mutiplexed fiber-optic Fizeau strain sensor network,” Optics Letters, vol. 31, no. 6, pp. 700-702, 2006.

[13] T. Liu and G.F. Fernado, “A frequency division multiplexed low-finesse finer optic Fabry-Perot sensor system for strain and displacement measurements,” Review of Scientific Instruments, vol. 71, no. 3, pp. 1275-1278, 2000.

[14] B. Qi, G. R. Pickrell, P. Zhang, et al., “Novel data processing techniques for dispersive white light interferometer,” Optical Engineering, vol. 42, no. 11, pp. 3165-3171, 2003.

[15] Y. Jiang, and C. J. Tang, “High-finesse micro-lens fiber-optic extrinsic Fabry-Perot interferometric sensors,” Smart Materials and Structures, vol. 17, no. 5, pp. 055013, 2008.

[16] Y. Jiang and C. J. Tang, “High-finesse micro-lens optical fiber Fabry-Perot filters, ” Microwave and Optics Technology Letters, vol. 50, no. 9, pp. 2386-2389, 2008.

[17] Y. Jiang, “Fourier transform white-light interferometry for the measurement of fiber optic extrinsic Fabry-Perot interferometric sensors,” IEEE Photo Technology Letters, vol. 30, no. 2, pp. 75-77, 2008.

[18] Y. Jiang and C. J. Tang, “High-resolution interrogation technique for the measurement of extrinsic Fabry-Perot interferometer (EFPI) using a compensating EFPI,” Measurement Science Technology, vol. 19, no. 6, pp. 065304, 2008.

[19] Y. Jiang and C. J. Tang, “Fourier transform white-light interferometry based spatial frequency-division multiplexing of extrinsic Fabry-Perot interferometric sensors,” Review of Scientific Instruments, vol. 79, no. 10, pp. 106105, 2008.

[20] Y. Jiang, “Wavelength-scanning white-light interferometry with a 3 × 3 coupler-based interferometer,” Optics Letters, vol. 33, no. 16, pp. 1869-1871, 2008.

[21] Y. Jiang, Y. Xu, and C. K. Y. Leung, “3 × 3 coupler based Mach-Zehnder interferometer and its application in the delamination detection in FRP composite,” Journal of Intelligent Material Systems and Structures, vol. 19, no. 4, pp. 497-507, 2008.

[22] Y. Jiang, “Stabilized 3 × 3 coupler based interferometer for the demodulation of fiber Bragg grating sensors,” Optical Engineering, vol. 47, no. 1, pp. 015006, 2008.

[23] Y. Jiang, “Four-element fiber Bragg grating acceleration sensor array,” Optics and Lasers in Engineering, vol. 46, no. 9, pp. 695-703, 2008.

[24] Y. Jiang and C. J. Tang, “Hybrid interrogation system for intensity-type sensor/fiber Bragg grating/extrinsic Fabry-Perot interferometer,” Measurement Science and Technology, vol. 20, pp. 025308, 2009,.

[25] Y. Jiang, C. J. Tang, and F. J. Zhang, “WDM/SDM of intensity-type fiber-optic sensors,” Microwave and Optics Technology Letters, vol. 51, no. 2, pp. 432-435, 2009.