Ultrashort pulse laser drilling of micro-holes(part 2)—experimental study

Zhao Wanqin; Mei Xuesong; Wang Wenjun

doi:10.3788/irla201948.0242001

[1] Maiman T H. Stimulated optical radiation in ruby[J]. Nature, 1969, 187(4736): 134-136.

[2] Zhang G T. Study on LiF:F_2~-crystal Q-switch characteristics[J]. Laser Journal, 1987, 8(6): 358-361.

[3] Fork R L, Greene B I, Shank C V. Generation of optical pulses shorter than 0.1 psec by colliding pulse mode-locking[J]. Applied Physics Letters, 1981, 38(9): 671-672.

[4] Hentschel M, Kienberger R, Spielmann C, et al. Attosecond metrology[J]. Nature, 2001, 414(6863): 509-513.

[5] Yang Jing, Gong Cheng, Zhao Jiayu, et al. Fabrication of terahertz device by 3D printing technology [J]. Chinese Optics, 2017, 10(1): 77-85. (in Chinese)

[6] Zhang Junzhan, Wang Yuqian, Zhang Ying, et al. Effect of feeding speed on micro-hole drilling in TiC ceramic by femtosecond laser[J]. Optics and Precision Engineering, 2015, 23(6): 1565-1571. (in Chinese)

[7] Wang Yanfang, Li Hao, Shi Zhiqiang, et al. Laser cladding Fe-based solid solution alloy coating with high corrosion resistance [J]. Infrared and Laser Engineering, 2017, 1(8): 0806001. (in Chinese)

[8] Zhang Y, Wang Y, Zhang J, et al. Micromachining features of TiC ceramic by femtosecond pulsed laser[J]. Ceramics International, 2015, 41(5): 6525-6533.

[9] Luzius S, Sailer M, Siebert C, et al. PCB drilling with high power picosecond lasers [J]. Physics Procedia, 2013, 41: 723-726.

[10] Fann W S, Storz R, Tom H W, et al. Electron thermalization in gold[J]. Physical Review B Condensed Matter, 1992, 46(20): 13592.

[11] Wellershoff S S, Hohlfeld J, Güdde J, et al. The role of electron-phonon coupling in femtosecond laser damage of metals[J]. Applied Physics A, 1999, 69(1): S99-S107.

[12] Kojisugioka, Ya Cheng. Ultrafast Laser Processing: From Micro-to Nanoscale[M]. Singapore: Pan Stanford Pub, 2013: 225-261.

[13] Corkum P B, Brunel F, Sherman N K, et al. Thermal response of metals to ultrashort-pulse laser excitation[J]. Physical Review Letters, 1988, 61(25): 2886.

[14] Breitling D, Dausinger F H. Precise drilling of steel with ultrashort pulsed solid state lasers[C]//Laser Processing of Advanced Materials and Laser Microtechnologies, 2003: 271-279.

[15] Wang Xinlin. Femtosecond laser ablation of metallic materials and fabrication of micro-components[D]. Wuhan: Huazhong University of Science and Technology, 2007. (in Chinese)

[16] Liu J M. Simple technique for measurements of pulsed Gaussian-beam spot sizes[J]. Optics Letters, 1982, 7(5): 196.

[17] Yong J, Becker M F, Walser R M. Laser-induced damage on single-crystal metal surfaces[J]. Journal of the Optical Society of America B, 1988, 5(3): 648-659.

[18] Raciukaitis G, Gedvilas M. Accumulation effects in laser ablation of metals with high-repetition-rate lasers[C]//SPIE, 2008, 7005: 70052L.

[19] Nolte S, Momma C, Jacobs H, et al. Ablation of metals by ultrashort laser pulses[J]. Journal of the Optical Society of America B Optical Physics, 1997, 14(10): 2716-2722.

[20] Ashkenasi D, Rosenfeld A, Varel H, et al. Laser processing of sapphire with picosecond and sub-picosecond pulses[J]. Applied Surface Science, 1997, 120(1-2): 65-80.

[21] Klein-Wiele J H, Bekesi J, Simon P. Sub-micron patterning of solid materials with ultraviolet femtosecond pulses[J]. Applied Physics A, 2004, 79(4-6): 775-778.

[22] Zang Zhigang, Zeng Xiaofeng, Du Jihe, et al. Femtosecond laser direct writing of microholes on roughened ZnO for output power enhancement of InGaN light-emitting diodes[J]. Optics Letters, 2016, 41(15): 3463.

[24] Dausinger F, Lichtner F, Lubatschowski H. Femtosecond Technical and Medical Applications[M]. Berlin: Springer, 2004.

[25] Dausinger F. Precise drilling with short-pulsed lasers[C]//SPIE, 2000, 3888: 180-187.

[26] Kononenko T V, Klimentov S M, Konov V I, et al. Propagation of short-pulsed laser radiation and stages of ablative deep-channel formation[C]//SPIE, 2001, 4274(4274): 248.

[27] Kononenko T V, Konov V I, Garnov S V, et al. Dynamics of deep short pulse laser drilling: ablative stages and light propagation[J]. Laser Physics, 2001, 11(3): 343.

[28] Garnov S V, Breitling D, Dausinger F. Hole formation process in laser deep drilling with short and ultrashort pulses[C]//SPIE, 2002, 4426(4426): 108.

[30] Zhao W, Wang W, Jiang G, et al. Ablation and morphological evolution of micro-holes in stainless steel with picosecond laser pulses[J]. International Journal of Advanced Manufacturing Technology, 2015, 80(9-12): 1713-1720.

[31] Zhao Wanqin. Studies on technologies and applications in micro-hole percussion drilling of picosecond ultrashort pulse laser of metals[D]. Xi′an: Xi′an Jiaotong University, 2016. (in Chinese)

[35] Xia Bo. Mechanism and online observation of high-aspect-ratio, high-quality microholes drilling with femtosecond laser[D]. Beijing: Beijing Institute of Technology, 2016. (in Chinese)

[36] Kaakkunen J J J, Silvennoinen M, Paivasaari K, et al. Water-assisted femtosecond laser pulse ablation of high aspect ratio holes[J]. Physics Procedia, 2011, 12(1): 89-93.

[37] Hidai H, Kuroki Y, Matsusaka S, et al. Curved drilling via inner hole laser reflection[J]. Precision Engineering, 2016, 46: 96-103.

[38] Lin C H, Rao Z H, Jiang L, et al. Investigations of femtosecond-nanosecond dual-beam laser ablation of dielectrics[J]. Optics Letters, 2010, 35(14): 2490-2492.

[39] Lin C H, Rao Z H, Jiang L, et al. Enhancement of ablation efficiency by a femto/nano-second dual-beam micromachining system[C]//SPIE LASE, 2010: 7585.

[40] Sugioka K, Midorikawa K. VUV-UV multiwavelength excitation process for high-quality ablation of fused silica[C]//SPIE, 2013, 8777: 04.

[41] Tan B, Venkatkrishnan K, Sivakumar N R, et al. Laser drilling of thick material using femtosecond pulse with a focus of dual-frequency beam[J]. Optics & Laser Technology, 2003, 35(3): 199-202.

[42] Kamata M, Tsujikawa S, Sumiyoshi T, et al. Dual wavelength femtosecond laser materials processing[C]//Lasers and Electro-Optics, CLEO 2007, 2007: 1-2.

[43] Zoppel S, Zehetner J, Reider G A. Two color laser ablation: Enhanced yield, improved machining[J]. Applied Surface Science, 2007, 253(19): 7692-7695.

[44] Zhao W, Wang W, Mei X, et al. Investigations of morphological features of picosecond dual-wavelength laser ablation of stainless steel[J]. Optics & Laser Technology, 2014, 58(6): 94-99.

[45] Forsman A C, Banks P S, Perry M D, et al. Doublepulse machining as a techniques for the enhancement of material removal rates in laser machining of metals[J]. Journal of Applied Physics, 2005, 98(3): 474-477.

[46] Jiang L, Tsai H L. Modeling of ultrashort laser pulse-train processing of metal thin films[J]. International Journal of Heat & Mass Transfer, 2007, 50(17-18): 3461-3470.

[47] Huang H, Yang L M, Liu J. Micro-hole drilling with femtosecond fiber laser[C]//SPIE, 2013, 8607: 86070K.

[48] Nebel A, Herrmann T, Henrich B, et al. Fast micromachining using picosecond lasers[C]//SPIE, 2005: 5706.

[49] Kling R, Mottay E. Metal microdrilling combining high power femtosecond laser and trepanning head[C]//SPIE, 2013, 8608: 86080F.

[50] Lee H M, Choi J H, Moon S J. Determining the machining parameters for femtosecond laser helical drilling of aluminosilicate glass substrate[J]. International Journal of Precision Engineering & Manufacturing, 2017, 18(7): 923-930.

[51] Romoli L, Vallini R. Experimental study on the development of a micro-drilling cycle using ultrashort laser pulses[J]. Optics & Lasers in Engineering, 2016, 78: 121-131.

[52] Zhang H, Di J, Ming Z, et al. An investigation on the hole quality during picosecond laser helical drilling of stainless steel 304[J]. Applied Physics A, 2015, 119(2): 1-8.

[53] Breitling D, Dausinger F. Fundamental aspects in machining of metals with short and ultrashort laser pulses[C]//SPIE, 2004, 5339: 49-63.

[54] Knappe R, Weis A, Nebel A. Scaling ablation rates for picosecond lasers using burst micromachining[C]//SPIE, 2010, 7585: 75850H.

[55] Klimt B. Micromachining with industrial picosecond lasers[J]. Laser Technik Journal, 2007, 4(1): 40-43.

[56] Weck A, Crawford T H R, Wilkinson D S, et al. Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond and nanosecond pulses[J]. Applied Physics A, 2008, 90(3): 537-543.