• Chinese Journal of Lasers
  • Vol. 48, Issue 2, 0202012 (2021)
Yansheng Yao1、3、*, Jianping Tang1、2, Yachao Zhang2、*, Yanlei Hu2, and Dong Wu2
Author Affiliations
  • 1School of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei, Anhui 230601, China
  • 2School of Engineering Science, University of Science and Technology of China, Hefei, Anhui 230027, China
  • 3Key Laboratory of Intelligent Manufacturing of Construction Machinery, Hefei, Anhui 230601, China
  • show less
    DOI: 10.3788/CJL202148.0202012 Cite this Article Set citation alerts
    Yansheng Yao, Jianping Tang, Yachao Zhang, Yanlei Hu, Dong Wu. Development of Laser Fabrication Technology for Amorphous Alloys[J]. Chinese Journal of Lasers, 2021, 48(2): 0202012 Copy Citation Text show less
    Centimeter-sized bulk amorphous alloy ingots of different systems[6]. (a) Pd-Cu-Ni-P; (b) Zr-Al-Ni-Cu; (c) Cu-Zr-Al-Ag; (d) Ni-Pd-P-B
    Fig. 1. Centimeter-sized bulk amorphous alloy ingots of different systems[6]. (a) Pd-Cu-Ni-P; (b) Zr-Al-Ni-Cu; (c) Cu-Zr-Al-Ag; (d) Ni-Pd-P-B
    Amorphous alloy components formed by selective laser melting and the characterization of amorphous structure[14]. (a) Amorphous alloy components formed by selective laser melting; (b) XRD patterns of as-spun ribbon, powders, and formed components
    Fig. 2. Amorphous alloy components formed by selective laser melting and the characterization of amorphous structure[14]. (a) Amorphous alloy components formed by selective laser melting; (b) XRD patterns of as-spun ribbon, powders, and formed components
    Comparison of wear behavior and biocompatibility between Ti6Al4V alloy and 3D printed Zr-based bulk amorphous alloy[25]. (a) Friction coefficient; (b) wear rate; (c) potentiodynamic polarization curves; (d) in vitro cell culture
    Fig. 3. Comparison of wear behavior and biocompatibility between Ti6Al4V alloy and 3D printed Zr-based bulk amorphous alloy[25]. (a) Friction coefficient; (b) wear rate; (c) potentiodynamic polarization curves; (d) in vitro cell culture
    Macroscopic planar views and structural characteristics of welded Zr-based amorphous alloy at different scanning speeds[30].(a)(b) 2m·min-1; (c) 4m·min-1; (d) 8m·min-1; (e) XRD patterns of the corresponding regions
    Fig. 4. Macroscopic planar views and structural characteristics of welded Zr-based amorphous alloy at different scanning speeds[30].(a)(b) 2m·min-1; (c) 4m·min-1; (d) 8m·min-1; (e) XRD patterns of the corresponding regions
    Structural characteristics and corrosion resistance test results of the seventh layer, fourth layer, and first layer of multi-layer amorphoous alloy coating Zr65Al7.5Ni10Cu17.5[53]. (a) XRD patterns; (b) potentiodynamic
    Fig. 5. Structural characteristics and corrosion resistance test results of the seventh layer, fourth layer, and first layer of multi-layer amorphoous alloy coating Zr65Al7.5Ni10Cu17.5[53]. (a) XRD patterns; (b) potentiodynamic
    Theoretical temperature evolution in a Zr-based bulk amorphous alloys at different pulse durations and SEM images of ablation pits[64]
    Fig. 6. Theoretical temperature evolution in a Zr-based bulk amorphous alloys at different pulse durations and SEM images of ablation pits[64]
    Comparison of wettability of surface processed by different laser currents[68].(a) Unprocessed; (b) 28.5 A; (c) 29 A; (d) 30 A
    Fig. 7. Comparison of wettability of surface processed by different laser currents[68].(a) Unprocessed; (b) 28.5 A; (c) 29 A; (d) 30 A
    Yansheng Yao, Jianping Tang, Yachao Zhang, Yanlei Hu, Dong Wu. Development of Laser Fabrication Technology for Amorphous Alloys[J]. Chinese Journal of Lasers, 2021, 48(2): 0202012
    Download Citation