[1] Y WAKU, N NAKAGAWA, T WAKAMOTO et al. High temperature strength and thermal stability of a unidirectionally solidified Al₂O₃/YAG eutectic composite. Journal of Materials Science, 33, 1217-1225(1998).

[2] Y WAKU, N NAKAGAWA, T WAKAMOTO et al. A ductile ceramic eutectic composite with high strength. Nature, 389, 49-52(1997).

[3] J LLORCA, M ORERA V. Directionally solidified eutectic oxide ceramics. Progress in Materials Science, 51, 711-809(2006).

[4] Y PASTOR J, J LLORCA, A SALAZAR et al. Mechanical properties of melt-grown alumina-yttrium aluminum garnet eutectics up to 1900 K. Journal of the American Ceramic Society, 88, 1488-1495(2005).

[5] B OLIETE P, I PENA J, A LARREA et al. Ultra-high-strength nanofibrillar Al₂O₃-YAG-YSZ eutectics. Advanced Materials, 19, 2313-2318(2007).

[6] J ZHANG, J SU H, K SONG et al. Microstructure, growth mechanism and mechanical property of Al₂O₃-based eutectic ceramic in situ composites. Journal of the European Ceramic Society, 31, 1191-1198(2011).

[7] Y WAKU, N NAKAGAWA, H OHTSUBO et al. Fracture and deformation behaviour of melt growth composites at very high temperatures. Journal of Materials Science, 36, 1585-1594(2001).

[8] J MARTINEZ FERNANDEZ, A SAYIR, C FARMER S. High temperature creep deformation of directionally solidified Al₂O₃/ Er₃Al₅O₁₂. Acta Materialia, 51, 1705-1720(2003).

[9] C MESA M, B OLIETE P, M ORERA V et al. Microstructure and mechanical properties of Al₂O₃/Er₃Al₅O₁₂ eutectic rods grown by the laser-heated floating zone method. Journal of the European Ceramic Society, 31, 1241-1250(2011).

[10] C MESA M, B OLIETE P, A LARREA. Microstructural stability at elevated temperatures of directionally solidified Al₂O₃/Er₃Al₅O₁₂ eutectic ceramics. Journal of Crystal Growth, 360, 119-122(2012).

[11] Q REN, J SU H, J ZHANG et al. Microstructure control, competitive growth and precipitation rule in faceted Al₂O₃/Er₃Al₅O₁₂ eutectic in situ composite ceramics prepared by laser floating zone melting. Journal of the European Ceramic Society, 39, 1900-1908(2019).

[12] Q REN, J SU H, J ZHANG et al. Halo formation in directionally solidified Al₂O₃-Er₃Al₅O₁₂ off-eutectic in situ composite ceramics. Materials Characterization, 150, 31-37(2019).

[13] Q REN, J SU H, J ZHANG et al. Eutectic growth behavior with regular arrangement in the faceted Al₂O₃/Er₃Al₅O₁₂ irregular eutectic system at low growth rate. Scripta Materialia, 162, 49-53(2019).

[14] Q REN, J SU H, J ZHANG et al. Effect of an abrupt change in pulling rate on microstructures of directionally solidified Al₂O₃- Er₃Al₅O₁₂ eutectic and off-eutectic composite ceramics. Ceramics International, 45, 6632-6638(2019).

[15] H SAI, H YUGAMI, K NAKAMURA et al. Selective emission of Al₂O₃/Er₃Al₅O₁₂ eutectic composite for thermophotovoltaic generation of electricity. Japanese Journal of Applied Physics, 39, 1957-1961(2000).

[16] Y ADACHI, H YUGAMI, K SHIBATA et al. Compact TPV generation system using Al₂O₃/Er₃Al₅O₁₂ eutectic ceramics selective emitters. AIP Conference Proceedings, 738, 198-205(2004).

[17] N NAKAGAWA, H OHTSUBO, Y WAKU et al. Thermal emission properties of Al₂O₃/Er₃Al₅O₁₂ eutectic ceramics. Journal of the European Ceramic Society, 25, 1285-1291(2005).

[18] B OLIETE P, C MESA M, I MERINO R et al. Directionally solidified Al₂O₃-Yb₃Al₅O₁₂ eutectics for selective emitters. Solar Energy Materials and Solar Cells, 144, 405-410(2016).

[19] B OLIETE P, J MANUEL, L ROBLEDO et al. ME: Y, Er and Yb) eutectic coatings for thermophotovoltaic systems. Ceramics International, 43, 16270-16275(2017).

[20] M LAKIZA S. Directionally solidified eutectics in the Al₂O₃-ZrO₂- Ln(Y)₂O₃ systems. Powder Metallurgy and Metal Ceramics, 48, 1-2(2009).

[21] A YOSHIKAWA, K HASEGAWA, H LEE J et al. Phase identification of Al₂O₃/RE₃Al₅O₁₂ and Al₂O₃/REAlO₃(RE=Sm-Lu, Y) eutectics. Journal of Crystal Growth, 218, 67-73(2000).

[22] R ANSTIS G, P CHANTIKUL, R LAWN B et al. A critical- evaluation of indentation techniques for measuring fracture- toughness: I, direct crack measurements. Journal of the American Ceramic Society, 64, 533-538(1981).

[23] X WANG, Y WANG J, C SUN L et al. Microstructure evolution of Al₂O₃/Y₃Al₅O₁₂ eutectic crystal during directional solidification. Scripta Materialia, 108, 31-34(2015).

[24] L MAZEROLLES, L PERRIERE, S LARTIGUE-KORINEK et al. Microstructures, crystallography of interfaces, and creep behavior of melt-growth composites. Journal of the European Ceramic Society, 28, 2301-2308(2008).

[25] X WANG, L TIAN Z, W ZHANG et al. Mechanical properties of directionally solidified Al₂O₃/Y₃Al₅O₁₂ eutectic ceramic prepared by optical floating zone technique. Journal of the European Ceramic Society, 38, 3610-3617(2018).

[26] S FRAZER C, C DICKEY E, A SAYIR. Crystallographic texture and orientation variants in Al₂O₃-Y₃Al₅O₁₂ directionally solidified eutectic crystals. Journal of Crystal Growth, 233, 187-195(2001).

[27] S SAKATA, A MITANI, K SHIMIZU et al. Crystallographic orientation analysis and high temperature strength of melt growth composite. Journal of the European Ceramic Society, 25, 1441-1445(2005).

[28] J SU H, J ZHANG, D MA W et al. In situ fabrication of highly-dense Al₂O₃/YAG nanoeutectic composite ceramics by a modified laser surface processing. Journal of the European Ceramic Society, 34, 739-744(2014).

[29] X WANG, D WANG, H ZHANG et al. Mechanism of eutectic growth in directional solidification of an Al₂O₃/Y₃Al₅O₁₂ crystal. Scripta Materialia, 116, 44-48(2016).