[1] LI Ya-guo，WANG Jian，XU Qiao，et al. Investigation of optical components polished with polyurethane pad [J]. Opto-Electronic Engineering，2008，35(11)：139-144.

[2] LIU Min-cai，HU Xiao-yang，LI Zhuang-sheng. Research of fabricating large quadrate high-precision plane optical elments [J]. Optical Technique，2001，27(6)：518-521.

[3] WANG Jian，XU Qiao，SHI Qi-kai. Computer controlled optical finishing laminate fused silica [J]. Optical Technique，2001， 27(6)：560-561.

[4] Hooper B J，Byren G，Galligan S. Pad conditioning in chemical mechanical polishing [J]. Journal of Materials Processing Technology(S0924-0136)，2002，123(1)：107-113.

[5] Hovoun K，Hyoungjae K，Haedo J. Self-condition of encapsulated abrasive pad in chemical mechanical polishing [J]. Journal of Materials Processing Technology(S0924-0136)，2003，142：614-618.

[6] Timothy D，Jim S. Characterizing CMP pad conditioning using diamond abrasives [J]. MICRO (S0272-1732)，2002，1：47-54.

[7] HU Wei，WEI Xin，XIE Xiao-zhu，et al. Investigation of functions and effects of polishing pad conditioning in chemical mechanical polishing [J]. Diamond & Abrasives Engineering，2007，161(5)：58-63.

[8] Zhou Y Y ， Davis E C. Variation of polish pad shape during pad dressing [J]. Materials Science and Engineering(S0921-5107)，1999，B68：91-98.

[9] Runnels S R. Feature scale fluid-based erosion modeling for chemical mechanical polishing [J]. J. Electrochem. Soc(S0013-4651)，1994，141(7)：1900-1904.

[10] Luo J F，Dornfeld D A. Material removal mechanism in chemical mechanical polishing：theory and modeling [J]. IEEE Trans. Semicond. Manuf (S0894-6507)，2001，14(2)：112-123.

[11] WEN Shi-zhu，HUANG Ping. Principles of Tribology：Third Edition [M]. Beijing：Tsinghua University Press，2008： 259-266.

[12] Harsha A P，Tewari U S. Two-body and three-body abrasive wear behaviour of polyaryletherketone composites [J]. Polymer Testing(S0142-9418)，2003，22：403-418.

[13] Lin Y Y，Lo S P. Finite element modeling for chemical mechanical polishing process under different back pressures [J]. Journal of Materials Processing Technology(S0924-0136)，2003，140：646-652.

[14] Wang D，Lee J，Holland K，et al. Von mises stress in chemical-mechanical polishing processes [J]. J. Electrochem. Soc(S0013-4651)，1997，144(3)：1121-1127.

[15] CAI G Q，LU Y S，CAI R，et al. Analysis on lapping and polishing pressure distribution [J]. CIRP Annals(S0007-8506)，1998， 47(1)：235-238.

[16] Li Y G，Wang J，Xu Q，et al. Effects of velocity and pressure distributions on material removal rate in polishing process [J]. Proc. of SPIE(S0277-786X)，2009，7282：72820G-72820G-7