Effects of temperature field on properties of micro-structure of AlSi10Mg with laser metal deposition

Jiaxuan Cai; Le Wan; Shihong Shi; Jie Wu; Qiang Yang; Tuo Shi; Mengying Cheng

doi:10.3788/IRLA20210366

[1] J Wu, X Q Wang, W Wang, et al. Microstructure and strength of selectively laser melted AlSi10Mg. Acta Materialia, 117, 311-320(2016).

[2] L Thijs, K Kempen, J P Kruth, et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Materialia, 61, 1809-1819(2013).

[3] J Zhang, B Song, Q Wei, et al. A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends. Journal of Materials Science & Technology, 35, 270-284(2019).

[4] D D Gu, H M Zhang, H Y Chen, et al. Laser additive manufacturing of high-performance metallic aerospace components. Chinese Journal of Lasers, 47, 0500002(2020).

[5] Y X Dang, W J Qi, L L Lu. Research status and development trend of numerical simulation of laser cladding technology. Hot Working Technology, 45, 23-27(2016).

[6] H Liu, G Yu, X He, et al. Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding. Chinese Journal of Lasers, 40, 1203007(2013).

[7] Sun J. Process researchnumericalsinnulation oflaser cladding fabrication technology feeding by side[D]. Guangzhou: South China University of Technology, 2012: 4579. (in Chinese)

[8] W C Tseng, J N Aoh. Simulation study on laser cladding on preplaced powder layer with a tailored laser heat source. Optics & Laser Technology, 48, 141-152(2013).

[9] J P Zhang, S H Shi, W W Jiang, et al. Simulation analysis of temperature field and process optimization of laser cladding based on internal wire feeding of three beams. Chinese Journal of Lasers, 46, 1002004(2019).

[10] L Q Li, J D Wang, C C Wu, et al. Temperature field of molten pool and microstructure property in laser melting depositions of Ti6Al4V. Chinese Journal of Lasers, 44, 0302009(2017).

[11] Yu F T. Microstructure perfmance of AlSi10Mg alloy prepared by laser melting deposition [D]. Harbin: Harbin Institute of Technology, 2019: 4255. (in Chinese)

[12] P Wen, Z X Li, S Zhang, et al. Investigation on porosity, microstructures and performances of 6A01-T5 aluminum alloy joint by oscillating fiber laser CMT hybrid welding. Chinese Journal of Lasers, 47, 0802003(2020).

[13] Chu F H, Zhang X, Huang W J, et al. A review: The fmation mechanism effect on mechanical properties of defects of aluminum alloy by ive laser melting[JOL]. Materials Repts: 126. [20210410]. http:kns.cnki.kcmsdetail50.1078.TB.20200902.1631.002.html. (in Chinese)

[14] LiuT, Y Q Zhao, X D Zhou, et al. Effect of energy ratio coefficient on pore during aluminum alloy laser-mig hybrid welding. Chinese Journal of Lasers, 47, 1102004(2020).

[15] L Q Li, X Wang, J Y Qu, et al. Effects of porosity on mechanical properties of laser metal deposited AlSi10Mg alloy. China Surface Engineering, 32, 109-114(2019).

[16] L Li, J Qu, X Wang. Formability and mechanical property of laser metal deposited AlSi10Mg alloy. Surface Technology, 48, 332-337(2019).

[17] E Biro, Y Zhou, D C Weckman, et al. The effects of Ni and Au/Ni platings on laser welding of thin sheets. Journal of Laser Applications, 13, 96-104(2001).

[18] Shi S H, Fu G Y, Wang A J, et al. Laser processing fming manufacturing intralight powder feeding process optical powder feeding nozzle: China, 200610116413.1 [P]. 20161201. (in Chinese)

[19] R Zhang, T Shi, S H Shi, et al. Closed-loop control of laser engineered net shaping of unequal-height parts. Chinese Journal of Lasers, 45, 0302005(2018).

[20] L Wan, S H Shi, Z X Xia, et al. Laser preheating/fluid cooling assisted lasermetal deposition of AlSi10Mg. Infrared and Laser Engineering, 50, 20200365(2021).

[21] Y L Huang, F H Yang, G Y Liang, et al. Using in-situ technique to determine laser absorptivity of Al-alloys. Chinese Journal of Lasers, 30, 449-453(2003).

[22] L Wan, S Shi, Z Xia, et al. Directed energy deposition of CNTs/AlSi10Mg nanocomposites: Powder preparation, temperature field, forming, and properties. Optics and Laser Technology, 139, 106984(2021).

[23] Cao F G, Hu J M, Liu Y, et al. Laser Processing [M]. Beijing: Chemical Industry Press, 2015: 4. (in Chinese)