Research on Laser Direct Jointing of 5052 Aluminum Alloy and PBT

Donglei Liu; Huihui Liu; Pin Li; Huixia Liu

doi:10.3788/CJL202148.2202019

[1] Jia S H, Jia J P, Jiao J K et al. Experimental and numerical studies on laser stir welding of carbon fiber reinforced thermal polymers/aluminum alloy[J]. Chinese Journal of Lasers, 46, 0702006(2019).

[2] Wang J G, Gao S Y, Chen X S et al. Mechanical properties of A356 aluminum alloy after laser surface remelting[J]. Chinese Journal of Lasers, 47, 0402002(2020).

[3] Tong Y Q, Zhang A, Huang J Y et al. Distribution and influence of oxygen content of laser pretreated aluminum alloy surface before welding[J]. Chinese Journal of Lasers, 46, 0202003(2019).

[4] Reitz V, Meinhard D, Ruck S et al. A comparison of IR- and UV-laser pretreatment to increase the bonding strength of adhesively joined aluminum/CFRP components[J]. Composites Part A: Applied Science and Manufacturing, 96, 18-27(2017).

[5] Chen Y J, Yue T M, Guo Z N. A new laser joining technology for direct-bonding of metals and plastics[J]. Materials & Design, 110, 775-781(2016).

[6] Huang C. Experimental study and numerical simulation on laser direct joining of metal and polymer[D](2014).

[7] Jiao J K, Xu Z F, Wang Q et al. CFRTP and stainless steel laser joining: thermal defects analysis and joining parameters optimization[J]. Optics & Laser Technology, 103, 170-176(2018).

[8] Jung K W, Kawahito Y, Takahashi M et al. Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel[J]. Materials & Design, 47, 179-188(2013).

[9] Zhang Z, Shan J G, Tan X H et al. Effect of anodizing pretreatment on laser joining CFRP to aluminum alloy A6061[J]. International Journal of Adhesion and Adhesives, 70, 142-151(2016).

[10] Dumitru G, Romano V, Weber H P et al. Laser microstructuring of steel surfaces for tribological applications[J]. Applied Physics A, 70, 485-487(2000).

[11] Cui C Y, Hu J D, Liu Y H et al. Microstructure evolution on the surface of stainless steel by Nd∶YAG pulsed laser irradiation[J]. Applied Surface Science, 254, 3442-3448(2008).

[12] Owens D K, Wendt R C. Estimation of the surface free energy of polymers[J]. Journal of Applied Polymer Science, 13, 1741-1747(1969).

[13] Meng X C. Joint formation and joining mechanism of FSW between CF/PEEK composite and 2060-T8 aluminum alloy[D](2020).

[15] Jung D J, Cheon J, Na S-J. Effect of surface pre-oxidation on laser assisted joining of acrylonitrile butadiene styrene (ABS) and zinc-coated steel[J]. Materials & Design, 99, 1-9(2016).

[16] Díaz B, Härkönen E, Światowska J et al. Low-temperature atomic layer deposition of Al2O3 thin coatings for corrosion protection of steel: surface and electrochemical analysis[J]. Corrosion Science, 53, 2168-2175(2011).

[17] David M, Roman T, Nakanishi H et al. A density functional theory-based investigation of adhesion of poly (butylene terephthalate) on aluminum[J]. Thin Solid Films, 509, 215-217(2006).

[18] Marcus P, Hinnen C, Imbert D et al. An in situ XPS study of the formation of aluminium-polymer interfaces[J]. Surface and Interface Analysis, 19, 127-132(1992).