[1] Ma Guozheng, Xu Binshi, Wang Haidou, et al. Optimal process, microstructure and properties of Mo films deposited by magnetron sputtering[J]. Rare Metal Materials and Engineering, 2014, 43(9): 2221-2226.

[2] Luo Zhenzhong. Application and development of molybdenum[J]. China Molybdenum Industry, 2003, 27(2): 7-10.

[3] Yang Jiaoxi, Chang Wanqing, Miao Xuanhe, et al. Influence of Mn、Mo、Ti additions on microstructure and magnetic properties of WC-FeNiCr composite coatings[J]. Chinese J Lasers, 2015, 42(10): 1006001.

[4] Spiller E. Soft X-ray optics[M]. Bellingham: SPIE Optical Engineering Press, 1994.

[5] Wang Xun, Jin Chunshui, Li Chun, et al. Preparation and characteristic of oxide capping-layer on extreme ultraviolet reflective mirrors[J]. Acta Optica Sinica, 2015, 35(3): 0331001.

[6] Vandekruijs R W E, Zoethout E, Yakshin A E, et al. Nano-size crystallites in Mo/Si multilayer optics[J]. Thin Solid Films, 2006, 515(2): 430-433.

[7] Kamikawa Y, Nishinaga J, Ishizuka S, et al. Effects of Mo surface oxidation on Cu (In, Ga) Se2 solar cells fabricated by three-stage process with KF postdeposition treatment[J]. Japanese Journal of Applied Physics, 2016, 55(2): 022304.

[8] Tian Jing, Yang Xin, Liu Shangjun, et al. Effect of thickness on the properties of Cu (Inx, Ga1-x) Se2 back conduct Mo thin films prepared by DC sputtering[J]. Acta Phys Sin, 2013, 62(11): 116801.

[9] Du X K, Wang C, Wang T M, et al. Microstructure and spectral selectivity of Mo-Al2O3 solar selective absorbing coatings after annealing[J]. Thin Solid Films, 2008, 516(12): 3971-3977.

[10] Lei Jiehong, Xing Pifeng, Tang Yongjian, et al. Effect of substrate temperature on structure and surface morphology of Mo films deposited by pulsed laser technique[J]. High Power Laser and Particle Beams, 2009, 21(3): 377-380.

[11] Qin Junling, Shao Jianda, Yi Kui. Mo/Si multilayers prepared with different sputtering power of Mo target[J]. High Power Laser and Particle Beams, 2007, 19(1): 67-70.

[12] Shao Shuying, Tian Guanglei, Fan Zhengxiu, et al. Influences of the deposition parameters and aging time on the residual stress of SiO2 films[J]. Acta Optica Sinica, 2005, 25(1): 126-130.

[13] Fan Zhengxiu. Development andrecent progress of optical thin films[J]. Acta Optica Sinica, 2011, 31(9): 0900131.

[14] Zhao J L, Yi K, Wang H, et al. Influence of deposition rate on interface width of Mo/Si multilayers[J]. Thin Solid Film, 2015, 592: 256-261.

[15] Zhu J, Ding Wanyu, Wang H, et al. Effects of argon pressure on properties of Mo films prepared by direct current pulse magnetron[J]. Microfabrication Technology, 2008, 4: 35-38.

[16] Dane A D, Veldhuis A, Boer D K G, et al. Application of genetic algorithms for characterization of thin layered materials by glancing incidence X-ray reflectometry[J]. Physica B: Physics of Condensed Matter, 1998, 253(3-4): 254-268.

[17] Tian Minbo. Thin film technologies and materials[M]. Beijing: Tsinghua University Press, 2006.

[18] Zhang Jianpeng, Huang Meidong, Li Yuan, et al. Effects of RF magnetron sputtering power on structure and properties of the optical vanadium oxide films[J]. Chinese J Lasers, 2015, 42(8): 0807001.