[1] U M CHOI, F BLAABJERG, S JORGENSEN et al. Power cycling test and failure analysis of molded intelligent power IGBT module under different temperature swing durations. Microelectronics Reliability, 403-408(2016).

[2] C R EDDY, D K GASKILL. Silicon carbide as a platform for power electronics. Science, 1398-1400(2009).

[3] F L RILEY. Silicon nitride and related materials. Journal of the American Ceramic Society, 245-265(2000).

[4] J S HAGGERTY, A LIGHTFOOT. Opportunities for enhancing the thermal conductivities of SiC and Si₃N₄ ceramics through improved processing. Ceramic Engineering and Science Proceeding, 475-487(1995).

[5] Y ZHOU, H HYUGA, D KUSANO et al. Development of high- thermal-conductivity silicon nitride ceramics. Journal of Asian Ceramic Societies, 221-229(2018).

[6] M KITAYAMA, 165-181(2021).

[7] Y ZHOU, H HYUGA, D KUSANO et al. A tough silicon nitride ceramic with high thermal conductivity. Advanced Materials, 4563-4567(2011).

[8] M KITAYAMA, K HIRAO, M TORIYAMA et al. Thermal conductivity of β-Si₃N₄: I, effects of various microstructural factors. Journal of the American Ceramic Society, 3105-3112(1999).

[9] M KITAYAMA, K HIRAO, A TSUGE et al. Thermal conductivity of β-Si₃N₄: II, effect of lattice oxygen. Journal of the American Ceramic Society, 1985-1992(2000).

[10] H M LEE, E B LEE, D L KIM et al. Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si₃N₄ ceramics. Ceramics International, 17466-17471(2016).

[11] Y LI, H-N KIM, H WU et al. Microstructure and thermal conductivity of gas-pressure-sintered Si₃N₄ ceramic: the effects of Y₂O₃ additive content. Journal of the European Ceramic Society, 274-283(2021).

[12] X ZHU, H HAYASHI, Y ZHOU et al. Influence of additive composition on thermal and mechanical properties of β-Si₃N₄ ceramics. Journal of Materials Research, 3270-3278(2004).

[13] W LIU, W TONG, R HE et al. Effect of the Y₂O₃ additive concentration on the properties of a silicon nitride ceramic substrate. Ceramics International, 18641-18647(2016).

[14] J ZHANG, W CUI, F LI et al. Effects of MgSiN₂ addition and post-annealing on mechanical and thermal properties of Si₃N₄ ceramics. Ceramics International, 15719-15722(2020).

[15] H HAYASHI, K HIRAO, M TORIYAMA et al. MgSiN₂ Addition as a means of increasing the thermal conductivity of β-silicon nitride. Journal of the American Ceramic Society, 3060-3062(2001).

[16] X W ZHU, Y SAKKA, Y ZHOU et al. Effect of MgSiN₂ addition on gas pressure sintering and thermal conductivity of silicon nitride with Y₂O₃. Journal of the Ceramic Society of Japan, 706-711(2008).

[17] X W ZHU, Y ZHOU, K HIRAO. Effect of sintering additive composition on the processing and thermal conductivity of sintered reaction-bonded Si₃N₄. Journal of the American Ceramic Society, 1398-1400(2004).

[18] P F BECHER, G S PAINTER, N SHIBATA et al. Effects of rare-earth (RE) intergranular adsorption on the phase transformation, microstructure evolution, and mechanical properties in silicon nitride with RE₂O₃+MgO additives: RE=La, Gd, and Lu. Journal of the American Ceramic Society, 2328-2336(2008).

[19] R L SATET, M J HOFFMANN. Influence of the rare-earth element on the mechanical properties of RE-Mg-bearing silicon nitride. Journal of the American Ceramic Society, 2485-2490(2005).

[20] M KITAYAMA, K HIRAO, K WATARI et al. Thermal conductivity of β-Si₃N₄: III, effect of rare-earth (RE = La, Nd, Gd, Y, Yb, and Sc) oxide additives. Journal of the American Ceramic Society, 353-358(2001).

[21] H LIANG, W WANG, K ZUO et al. Effect of LaB₆ addition on mechanical properties and thermal conductivity of silicon nitride ceramics. Ceramics International, 17776-17783(2020).

[22] K WATARI. High thermal conductivity non-oxide ceramics. Journal of the Ceramic Society of Japan(2001).

[23] K HIRAO, K WATARI, H HAYASHI et al. High thermal conductivity silicon nitride ceramic. MRS Bulletin, 451-455(2001).