[1] Pereira J M, Lerch B A. Effects of heat treatment on the ballistic impact properties of Inconel718 for jet engine fan containment applications[J]. International Journal of Impact Engineering, 2001, 25: 715-733.
[2] Loria E A. The status and prospects of alloy 718[J]. Journal of Metals, 1988, 40(7): 35-41.
[3] Zhou Jianzhong, Zuo Lidang, Huang Shu, et al.. Analysis on mechanical property of 6061-T6 aluminum alloy by laser shot peening based on strain rate[J]. Chinese J Lasers, 2012, 39(5): 0503003.
[4] Tian Qing, Zhou Jianzhong, Huang Shu, et al.. Relaxation of residual stress on Laser-Peened surface during cyclic loading[J]. Laser & Optoelectronics Progress, 2014, 51(8): 081403.
[5] Zhong Jinshan, Lu Jinzhong, Luo Kaiyu, et al.. Influence of laser shock processing on tensile properties and tribological behaviors of AISI304 stainless steel[J]. Chinese J Lasers, 2013, 40(5): 0503002.
[6] Altenberger I, Stach E A, Liu G, et al.. An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening[J]. Scripta Materialia, 2003, 48(12): 1593-1598.
[7] Liao Y L, Ye C, Kim B J, et al.. Nucleation of highly dense nanoscale precipitates based on warm laser shock peening[J]. Journal of Applied Physics, 2010, 108(6): 063518.
[8] Ye C, Suslov S, Kim B J, et al.. Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening[J]. Acta Materialia, 2011, 59(3): 1014-1025.
[9] Ye C, Liao Y L, Gary J, et al.. Warm laser shock peening driven nanostructures and their effects on fatigue performance in Al alloy 6061-T6[J]. Advance Engineering Material, 2010, 12(4): 291-297.
[10] Tani G, Orazi L, Fortunato A, et al.. Warm laser shock peening: new developments and process optimization[J]. CIRP Annals-Manufacturing Technology, 2011, 60(1): 219-222.
[11] Liu Huixia, Zhang Qiang, Gu Chunxing, et al.. Experimental investigation on warm micro-forming by laser-driven flyer[J]. Chinese J Lasers, 2014, 41(7): 0703011.
[12] Qian Kuangwu, Li Xiaoqi, Xiao Lin′ gang, et al.. Dynamic strain aging phenomenon in metals and alloys[J]. Journal of Fuzhou University (Natural Sciences), 2001, 29(6): 8-23.
[13] Gopinath K, Gogia A K, Kamat S V, et al.. Dynamic strain ageing in Ni-base superalloy 720Li[J]. Acta Materialia, 2009, 57(4): 1243-1253.
[14] Matlock D K, Richards M D, Speer J G. Surface modification to enhance fatigue performance of steel: Applications of deep rolling[C]. Materials Science Forum, 2010, 638: 142-147.
[15] Lu Jinzhong, Luo Kaiyu, Feng Aixin, et al.. Micro-structural enhancement mechanism of LY2 aluminum alloy by means of a single laser shock processing[J]. Chinese J Lasers, 2010, 37(10): 2662-2666.
[17] Lee Y H, Kwon D. Measurement of residual-stress effect by nanoindentation on elastically strained (100) W[J]. Scripta Materialia, 2003, 49(5): 459-465.
[18] Xu Z H, Li X. Estimation of residual stresses from elastic recovery of nanoindentation[J]. Philosophical Magazine, 2006, 86(19): 2835-2846.
[19] Wang Q, Ozaki K, Ishikawa H, et al.. Indentation method to measure the residual stress induced by ion implantation[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2006, 242(1): 88-92.
