[1] CHEN Guorong, CHENG Jijian. Relationship between the Average Coordination Number and Properties of chalconitride glasses[J]. Journal of the American Ceramic Society(S1551-2916), 1998, 71(6): 1695-1697.
[2] DU Hwan Cha, Yeon Hwang, Jeong-Ho Kim, et al. Fabrication and evaluation of chalcogenide glass molding lens for car night-vision system[J]. Proceedings of SPIE(S0277-786X), 2013, 8781: 117-121.
[3] Anurag Jain. Experimental Study and Numerical Analysis of Compression Molding Process for Manufacturing Precision Aspherical Glass Lenses[D]. Ohio: The Ohio State University, 2006: 82-102.
[4] AY Yi, B Tao, Klocke F, et al. Residual stresses in glass after molding and its influence on optical properties[J]. Procedia Engineering(S1877-7058), 2011, 19: 402–406.
[5] Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature[S]. ASTM International, West Conshohocken, PA. ASTM C1161-02c(2008)e1.
[6] YANG Chen, Allen Y Yi, SU Lijuan. Numerical Simulation and Experimental Study of Residual Stresses in Compression Molding of Precision Glass Optical Components[J]. Journal of Manufacturing Science and Engineering(S1087-1357), 2008, 130(5): 1012-1015.
[7] Anurag Jain, Allen Y Yi. Numerical Modeling of Viscoelastic Stress Relaxation During Glass Lens Forming Process[J]. Journal of the American Ceramic Society(S1551-2916), 2005, 88(3): 530-535.
[8] YIN Shaohui, HUO Jianjie, ZHOU Tianfeng, et al. Simulation of the Heating and Pressing Parameters of Micro Aspheric Lens Molding Process[J]. Journal of Hunan University: Natural Sciences, 2011, 38(1): 35-39.
[9] Sofuoglu H, Rasty J. On the measurement of friction coefficient utilizing the ring compression test[J]. Tribology International(S0301-679X), 1999, 32: 327-335.
[10] Yasushi Taniguchi, Kawasaki. Mold for molding optical element: US, 5855641[P]. 1999.
[11] Saito H, Shimizu T, Iwabuchi A. Effects of Co content and WC grain size on wear of WC cemented carbide[J]. Wear(S2078-869X), 2006, 261: 126–132.
[12] Albert bosch, roger senden, wolf Krause, et al. Melt spun aluminum for optical moulds[C]// Prozessketten Zur Replikatipon Komplexer Optikkomponenten, bremenn, Germany, Nov 13-14, 2008: 1037-1045.
[13] Cheung C F, Lee W B. Characterisation of nanosurface generation in single-point diamond turning[J]. International Journal of Machine Tools and Manufacture(S0890-6955), 2001, 41(6): 851–875.