Study on Laser Cladding Repair of Flat Chain of Scraper Conveyor

Jianhua Zhai; Wanlin Zhang; Huiyin Xu; Zhijie Liu; Dongshan Yang

doi:10.3788/LOP55.041402

[1] Shang K C. Study on the processing technology of 23MnNiMoCr54 steel for ring chain used in mine[J]. Mining Machinery, 41, 134-137(2013).

[2] Guan Z Z[M]. Handbook of laser processing technology, 287(2007).

[3] Shan X H, Wang C S, Yu Q. Microstructure and property of Nb-Al-Ti high temperature alloy coatings by laser cladding on Ti alloy surfaces[J]. Chinese Journal of Lasers, 43, 0802015(2016).

[4] Li Y D, Dong G, Yao J H. Microstructure evolution of heat-affected zones of 28CrMoNiV steel repaired by lasers[J]. Chinese Journal of Lasers, 43, 0802009(2016).

[5] Chen Y, Sun W L, Huang Y et al. Path planning of laser cladding for curved surface parts[J]. Laser & Optoelectronics Progress, 53, 061405(2016).

[6] Wang H, Zhao S W, Wang L W et al. Remanufacturing method of damaged impeller in centrifugal compressor[J]. Transactions of the Chinese Society of Agricultural Machinery, 47, 407-412(2016).

[7] Feng H, Li J F, Sun J. Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding[J]. Chinese Journal of Lasers, 41, 0803003(2014).

[8] Shen W G, Fang Y, Dong L et al. Experimental study on stainless steel alloy coating fabricated by laser cladding onto hydraulic support[J]. China Mechanical Engineering, 26, 2533-2538(2015).

[9] Zhang J Q. Research on laser cladding technology of No.45 steel[D]. Jinzhou: Liaoning University of Technology, 7-9(2016).

[10] Guan Z Z[M]. Handbook of laser processing technology, 297(2007).

[11] Peng R Y, Luo L, Liu Y et al. Research progress in coaxial powder feeding nozzles[J]. Laser & Optoelectronics Progress, 54, 080004(2017).

[12] Zan S P, Jiao J K, Zhang W W. Study on laser cladding process of 316L stainless steel powder[J]. Laser & Optoelectronics Progress, 53, 061406(2016).

[13] Zhi X, Zhao J F, Cai J. Effect of process on forming quality of fusion zone in laser cladding[J]. Laser & Optoelectronics Progress, 48, 101403(2011).

[14] Zhang J. Study on laser cladding process of QT600-3 cast iron parts[D]. Changsha: Hunan University, 21-24(2010).

[15] Zhai J H, Wang Q B, Wei X H et al. Repair of scraper conveyor sprocket based on metal 3D printing[J]. Chinese Journal of Lasers, 44, 0402007(2017).