[2] Cui Li, Li Zhuoxin, Wei Qi. Influence of high temperature oxidation on the superplastic ability of Ti-6Al-4V alloy［J］. Titanium Industry Progress, 2006, 23(2): 21-24.
[3] Cao J D, Zhang J S, Hua Y Q, et al. Improving the high temperature oxidation resistance of Ni-based superalloy GH202 induced by laser shock processing［J］. Journal of Materials Processing Technology, 2017, 243: 31-39.
[4] Jia Xinyun, Liu Peiying, Tao Ye, et al. High temperature oxidation and protection of titanium alloys［J］. Aeronautical Engineering and Maintenance, 2000(4): 19-21.
[5] Liu Pei, Wang Zhenyu, Li Xiaowei, et al. Preparation of Cr2AlC coatings on TC4 titanium alloy and its high temperature oxidation behavior［J］. Surface Technology, 2016, 45(11): 16-22.
[6] Liu Fengbin, Li Huiping, Cui Yan, et al. Surface structure of NiTi alloy by chromium ion implantation［J］. China Surface Engineering, 2014, 27(2): 31-37.
[7] Huang S, Zhu Y, Guo W, et al. Effects of laser shock processing on fatigue crack growth in Ti-17 titanium alloy［J］. Journal of Materials Engineering and Performance, 2017, 26(2): 813-821.
[8] Zou Shikun, Gong Shuili, Guo Enming, et al. Laser peening of turbine engine integrally blade rotor［J］. Chinese J Lasers, 2011, 38(6): 0601009.
[9] Qiao Hongchao, Zhao Jibin, Lu Ying, et al. Develop and analysis of nanosecond pulse width Nd∶YAG laser for laser peening［J］. Chinese J Lasers, 2013, 40(8): 0802001.
[10] Ren Xudong, Ruan Liang, Huangfu Yongzhuo, et al. Experimental research of laser shock processing 6061-T651 aluminium alloy during elevated temperature［J］. Chinese J Lasers, 2012, 39(3): 0303010.
[11] Altenberger I, Nalla R K, Sano Y, et al. On the effect of deep-rolling and laser-peening on the stress-controlled low and high cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 ℃［J］. International Journal of Fatigue, 2012, 44: 292-302.
[12] Karthik D, Swaroop S. Laser peening without coating induced phase transformation and thermal relaxation of residual stresses in AISI 321 steel［J］. Surface and Coatings Technology, 2016, 291: 161-171.
[13] Hua Y Q, Rong Z, Ye Y X, et al. Laser shock processing effects on isothermal oxidation resistance of GH586 superalloy［J］. Applied Surface Science, 2015, 330(6): 439-444.
[14] Peyre P, Fabbro R, Merrien P, et al. Laser shock processing of aluminium alloys. Application to high cycle fatigue behavior［J］. Materials Science and Engineering A, 1996, 210(1/2): 102-113.
[15] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser produced plasma in confined geometry［J］. Journal of Applied Physics, 1990, 68(2): 775-784.
[17] Hu Yongxiang. Research on the numerical simulation and impact effects of laser shock processing［D］. Shanghai: Shanghai Jiaotong University, 2008.
[18] Guleryuz H, Cimenoglu H. Oxidation of Ti-6Al-4V alloy［J］. Journal of Alloys and Compounds, 2009, 472(1): 241-246.
[19] Dai J J, Zhu J Y, Chen C Z, et al. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review［J］. Journal of Alloys and Compounds, 2016, 685: 784-798.
[20] Wang Qi, Wen Zhi, Yi Danqing, et al. Oxidation behavior of TA15 titanium alloy［J］. Materials Science and Engineering of Powder Metallurgy, 2012, 17(5): 571-578.
[21] Wei Dongbo, Zhang Pingze, Yao Zhengjun, et al. Effect of double glow plasma surface chromizing on high-temperature oxidation resistance of TC4 titanium alloy［J］. Transactions of Materials and Heat Treatment, 2011, 32(10): 146-150.
[22] Esaka F, Furuya K, Shimada H, et al. Comparison of surface oxidation of titanium nitride and chromium nitride films studied by X-ray absorption and photoelectron spectroscopy［J］. Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 1997, 15(5): 2521-2526.
[23] Wei Dongbo. Preparation and properties of high-temperature oxidation resistant coating on titanium alloy based on double glow plasma surface metallurgy technology［D］. Nanjing: Nanjing University of Aeronautics and Astronautics, 2012.
