• Infrared and Laser Engineering
  • Vol. 46, Issue 9, 918003 (2017)
Zhao Yongzhi*, Shao Liang, Ming Ming, Lv Tianyu, and Liu Changhua
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/irla201746.0918003 Cite this Article
    Zhao Yongzhi, Shao Liang, Ming Ming, Lv Tianyu, Liu Changhua. Assembly for large aperture telescope primary mirror support system[J]. Infrared and Laser Engineering, 2017, 46(9): 918003 Copy Citation Text show less
    References

    [1] Wang Jianli, Chen Tao, Zhang Jingxu. General requirements and key technologies for the ground-based high resolution EO imaging telescope[J]. Optics and Precision Engineering, 2008, 16(S): 1-16. (in Chinese)

    [2] Fan Lili, Zhang Jingxu, Jiang Hao, et al. Design of the primary mirror support of equatorial telescope[J]. Infrared and Laser Engineering, 2011, 40(3): 476-479. (in Chinese)

    [3] Fan Lei, Zhang Jingxu, Shao Liang, et al. Axial support for large aperture primary based on hydraulic Whiffle-tree [J]. Infrared and Laser Engineering, 2013, 42(8): 2126-2131. (in Chinese)

    [4] Shao Liang, Wu Xiaoxia, Chen Baogang, et al. Passive support system of light-weighted SiC primary mirror[J]. Optics and Precision Engineering, 2015, 23(5): 1380-1386. (in Chinese)

    [5] Hans J K, Peter E, Martin S. Mechanical principles of large mirror supports[C]//SPIE, 2010, 7733: 77332O.

    [6] Hermann B, Matthias E, Peter H, et al. SOFIA primary mirror assembly: structural properties and optical performance [C]//SPIE, 2003, 4857: 266-273.

    [7] Douglas R N, Victor K, John A, et al. Active tangent link system for transverse support of large thin meniscus mirrors [C]//SPIE, 2007, 6665: 66650F.

    [8] Shao Liang, Wu Xiaoxia, Yang Fei, et al. Progress on the hydraulic Whiffletree support system for SiC lightweight mirror[J]. Infrared and Laser Engineering, 2014, 43(11): 3820-3824. (in Chinese)

    [9] Shao Liang, Yang Fei, Wang Fuguo, et al. Design and optimization of supporting system for 1.2 m lightweight SiC primary mirror[J]. Chinese Optics, 2012, 5(3): 229-234. (in Chinese)

    [10] Wu Xiaoxia, Wang Minghao, Ming Ming, et al. Calibration of thermal distortion for large aperture SiC lightweight mirror[J]. Optics and Precision Engineering, 2012, 20(6): 1243-1249. (in Chinese)

    [11] Yang Dehua, Gu Bozhong, Cui Xiangqun. Structural analysis of the reflecting surface system of a large astronomical telescope[J]. Chinese Journal of Mechanical Engineering, 2004, 17(3): 415-419.

    [12] Yang Dehua, Xu Lingzhe, Xu Xinqi. Wind disturbance study on large astronomical telescopes[J]. Optical Technique, 2009, 35(3): 342-346. (in Chinese)

    [13] Hu Qiqian, Yao Zhengqiu. Astronomical Telescope Design[M]. Beijing: China Science & Technology Press, 2003: 338-357. (in Chinese)

    CLP Journals

    [1] Gao Zechao, Hao Liang, Wang Fuguo, Zhang Limin, Wang Rui, Fan Lei. Design and optimization of active adjusting lateral support mechanism for 2 m telescope[J]. Infrared and Laser Engineering, 2019, 48(8): 814001

    Zhao Yongzhi, Shao Liang, Ming Ming, Lv Tianyu, Liu Changhua. Assembly for large aperture telescope primary mirror support system[J]. Infrared and Laser Engineering, 2017, 46(9): 918003
    Download Citation