[1] Z TIAN, J WANG, B Y XIN et al. Pencil painting like preparation for flexible thermoelectric material of high-performance p-type Na1.4Co2O4 and novel n-type Na
[2] Z LI, C XIAO, Y XIE. Layered thermoelectric materials: structure, bonding, and performance mechanisms. Applied Physics Reviews, 9, 011303(2022).
[3] J MAO, G CHEN, Z F REN. Thermoelectric cooling materials. Nature Materials, 20, 454(2020).
[4] Y L ZHAO, H L CHENG, Y X LI et al. Quasi-solid conductive gels with high thermoelectric properties and high mechanical stretchability consisting of a low cost and green deep eutectic solvent. Journal of Materials Chemistry A, 10, 4222(2022).
[6] S N WANG, D Y WANG, L Z SU et al. Realizing synergistic optimization of thermoelectric properties in n-type BiSbSe3 polycrystals
[7] T D ZHANG, S P DENG, X D ZHAO et al. Regulation of Ge vacancies through Sm doping resulting in superior thermoelectric performance in GeTe. Journal of Materials Chemistry A, 10, 3698(2022).
[8] X ZHANG, L D ZHAO. Thermoelectric materials: energy conversion between heat and electricity. Journal of Materiomics, 1, 92(2015).
[9] L P HU, H J WU, T J ZHU et al. Tuning multiscale microstructures to enhance thermoelectric performance of n-type bismuth-telluride- based solid solutions. Advanced Energy Materials, 5, 1500411(2015).
[10] L P HU, H L GAO, H L LIU et al. Enhancement in thermoelectric performance of bismuth telluride based alloys by multi-scale microstructural effects. Journal of Materials Chemistry, 22, 16484(2012).
[11] H H XIE, C YU, T J ZHU et al. Increased electrical conductivity in fine-grained (Zr,Hf)NiSn based thermoelectric materials with nanoscale precipitates. Applied Physics Letters, 100, 254104(2012).
[12] P F QIU, J YANG, X Y HUANG et al. Effect of antisite defects on band structure and thermoelectric performance of ZrNiSn half- Heusler alloys. Applied Physics Letters, 96, 152105(2010).
[13] T DASGUPTA, C STIEWE, R HASSDORF et al. Effect of vacancies on the thermoelectric properties of Mg2Si1-
[14] L P HU, T J ZHU, H L LIU et al. Point defect engineering of high-performance bismuth-telluride-based thermoelectric materials. Advanced Functional Materials, 24, 5211(2014).
[15] H T GAO, K P ZHAO, H X G WULIJI et al. Adaptable sublattice stabilized high-entropy materials with superior thermoelectric performance. Energy Environmental Science, 16, 6046(2023).
[16] Y YU, D S HE, S Y ZHANG et al. Simultaneous optimization of electrical and thermal transport properties of Bi0.5Sb1.5Te3 thermoelectric alloy by twin boundary engineering. Nano Energy, 203(2017).
[17] B C QIN, Y ZHANG, D Y WANG et al. Ultrahigh average ZT realized in p-type SnSe crystalline thermoelectrics through producing extrinsic vacancies. Journal of the American Chemical Society, 142, 5901(2020).
[19] S R POPURI, M POLLET, R DECOURT et al. Large thermoelectric power factors and impact of texturing on the thermal conductivity in polycrystalline SnSe. Journal of Materials Chemistry C, 4, 1685(2016).
[20] C G FU, T J ZHU, Y T LIU et al. Band engineering of high performance p-type FeNbSb based half-Heusler thermoelectric materials for figure of merit ZT > 1, 8, 216(2015).
[21] H CHEN, W H FAN, D C AN et al. Improvement of thermoelectric performance of SnTe by energy band optimization and carrier regulation. Journal of Inorganic Materials, 39, 306(2024).
[22] Z TIAN, Q W JIANG, J B LI et al. Achieving n- and p-type thermoelectric materials with the identical chemical composition BiSbTe1.5Se1.5 by defect structure engineering. Chemical Engineering Journal, 152954(2024).
[23] J H SUI, J LI, J Q HE et al. Texturation boosts the thermoelectric performance of BiCuSeO oxyselenides. Energy Environmental Science, 6, 2916(2013).
[24] L P HU, T J ZHU, Y G WANG et al. Shifting up the optimum figure of merit of p-type bismuth telluride-based thermoelectric materials for power generation by suppressing intrinsic conduction. NPG Asia Materials, 6, 88(2014).
[26] L J ZHANG, J L WANG, Q SUN et al. Three-stage inter- orthorhombic evolution and high thermoelectric performance in Ag-doped nanolaminar SnSe polycrystals. Advanced Energy Materials, 7, 1700573(2017).
[28] X LU, J HOU, Q ZHANG et al. Effect of Mg content on thermoelectric property of Mg3(1+
[29] D Y SHEN, R H CHENG, W W WANG et al. Enhanced thermoelectric performance of p-type Bi2Si2Te6 enabled
[30] Y B LUO, Z MA, S Q HAO et al. Thermoelectric performance of the 2D Bi2Si2Te6 semiconductor. Journal of the American Chemical Society, 144, 1445(2022).
[31] N MADAR, Y GIVON, D MOGILYANSKY et al. High thermoelectric potential of Bi2Te3 alloyed GeTe-rich phases. Journal of Applied Physics, 120, 035102(2016).
[32] Y B LUO, J Y YANG, G LI. Enhancement of the thermoelectric performance of polycrystalline In4Se2.5 by copper intercalation and bromine substitution. Advanced Energy Materials, 4, 1300599(2014).
[33] O C YELGEL, G P SRIVASTAVA. Thermoelectric properties of n-type Bi2(Te0.85Se0.15)3 single crystals doped with CuBr and SbI3. Physical Review B, 85, 125207(2012).
[34] J SHUAI, H S KIM, Y C LAN. Study on thermoelectric performance by Na doping in nanostructured Mg1-
[35] H F MATARE. Carrier transport at grain boundaries in semiconductors. Journal of Applied Physics, 56, 2605(1984).
[36] J Y W SETO. The electrical properties of polycrystalline silicon films. Journal of Applied Physics, 46, 5247(1975).
[37] G E PIKE, C H SEAGER. The DC voltage dependence of semiconductor grain-boundary resistance. Journal of Applied Physics, 50, 3414(1979).
[38] A F MAY, G J SNYDER.
[39] P K SCHELLING, S R PHILLPOT, P KEBLINSKI. Kapitza conductance and phonon scattering at grain boundaries by simulation. Journal of Applied Physics, 95, 6082(2004).
[40] POLLACK. Kapitza resistance. Reviews of Modern Physics, 41, 48(1969).
[41] D NARDUCCI, E SELEZNEVA, G CEROFOLINI et al. Impact of energy filtering and carrier localization on the thermoelectric properties of granular semiconductors. Journal of Solid State Chemistry, 19(2012).
[42] Y LIN, M WOOD, K IMASATO et al. Expression of interfacial Seebeck coefficient through grain boundary engineering with multi-layer graphene nanoplatelets. Energy Environmental Science, 13, 4114(2020).
[43] L D ZHAO, B P ZHANG, J F LI et al. Enhanced thermoelectric and mechanical properties in textured n-type Bi2Te3 prepared by spark plasma sintering. Solid State Sciences, 10, 651(2008).
[44] J M SCHULTZ, J P MCHUGH, W A TILLER. Effects of heavy deformation and annealing on the electrical properties of Bi2Te3. Journal of Applied Physics, 33, 2443(1962).
[45] Q LI, S CHEN, K K LIU et al. Donor-like effect and thermoelectric properties in n-type Bi2Te3-based compounds. Acta Physica Sinica, 72, 097101(2023).
[46] E S TOBERER, A ZEVALKINK, N CRISOSTO et al. The Zintl compound Ca5Al2Sb6 for low-cost thermoelectric power generation. Advanced Functional Materials, 20, 4375(2010).
[47] Z F ZHOU, Y P ZHENG, Y Y YANG et al. Optimized weighted mobility induced high thermoelectric performance of ZnO-based multilayered thin films. Journal of the American Ceramic Society, 106, 2911(2022).
[48] G J SNYDER, A H SNYDER, M WOOD et al. Weighted mobility. Advanced Materials, 32, 2001537(2020).
[49] Y R GONG, S H ZHANG, Y X HOU et al. Enhanced density of states facilitates high thermoelectric performance in solution- grown Ge- and In-codoped SnSe nanoplates. ACS Nano, 17, 801(2022).
[50] Y XIAO, D Y WANG, Y ZHANG et al. Band sharpening and band alignment enable high quality factor to enhance thermoelectric performance in n-type PbS. Journal of the American Chemical Society, 142, 4051(2020).