• Infrared and Laser Engineering
  • Vol. 35, Issue 4, 419 (2006)
[in Chinese]*, [in Chinese], [in Chinese], [in Chinese], and [in Chinese]
Author Affiliations
  • [in Chinese]
  • show less
    DOI: Cite this Article
    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Status and trend of pyroelectric uncooled infrared focal plane arrays[J]. Infrared and Laser Engineering, 2006, 35(4): 419 Copy Citation Text show less
    References

    [2] WOOD R A,FOSS N A.Micromachined bolometer arrays achieve low-costing imaging[J].Laser Focus World,1997,6:101-106.

    [4] PHAM L,TJHEN W,YE C,et al.Surface-micromachined pyroelecteic infrared imaging array with vertically integrated signal processing circuitry[J].IEEE Trans on Ultra Ferr and Freq Cont,1994,41 (4):552-555.

    [5] MARK W L,KEITH W D,RAYMOND T P,et al.Low noise JFETs for room temperature X-ray detectors[J].nuclear Instruments and Methods Physics Research A,1996,380:318-322.

    [6] MARSTON R.Junction field-effect transistors[J].Electronics Now,1993,64:64-70.

    [7] VALENTI M.Infrared sensors hands-off temperature measurement[J].Mechanical Engineering,1991,113(10):40-45.

    [8] NODA M,HASHIMOTO K,KUBO R,et al.A new type of dielectric bolometer mode of detector pixel using ferroelectric thin film capacitors for infrared image sensor[J].Sensors and Actuators,1999,77(1):39-44.

    [9] KRUSE P,SKATRUD D.Uncooled infrared imaging arrays and systems[J].Semiconductors and Semimetals,1997,47:144-154.

    [10] LIU W G,ZHANG L Y,YAO X.Properties of PLT thin film pyroelectric detectors Ⅰ[J].Current Responsivity Infrared Phys,1995,36:857-860.

    [11] BERTUCCIO G,FASOLI L,SAMPIERTRO M.Stability of amplification in detectors with integrated electronics[J].Nuclear Instruments and Methods in Physics Research A,1996,380:331-334.

    [14] GALLO M A,WILLITS D S,LUBKE R A.Low cost uncooled IR sensor for battlefield surveillance[C]//Infrared Technology ⅪⅩ,1993,2020:351-362.

    [15] BUTLER N R,IWASA S.Sold state pyroelectric imager[C]//Proceeding of SPIE,Infrared Detectors and Focal Plane Arrays Ⅱ,1992,1685:146-154.

    [16] PIOTROWSKI J,GAWRON W,DJURIC Z.New generation of near-room-temperature photodetectors[J].Optical Engineering,1994,33(5):1413-1421.

    [17] FLANNERY R E,MILLER J E.Status of uncooled infrared imagers[C]//Proceedings of SPIE,Infrared Imaging Systems:Design,Analysis,Modeling and Tesing Ⅲ,1992,1689:379-395.

    [18] OWEN R,BELCHER J,BERATAN H,et al.Productibility advances in hybrid uncooled infrared devices[C]//Proceedings of SPIE,Infrared Detectors and Focal Plane Arrays Ⅳ,1998,2746:231-234.

    [21] HASHIMOTO K,NODA M,KUBO R,et al.Detector pixel in dielectric bolometer mode based on ferroelectric thin film capacitors for uncooled image sensor[C]//Technical Digest of the16th Sensor Symposium,1998:69-72.

    [22] NELSON E H.Method of Making a Thin Film Detector with an Aerogel Layer:US,5478425[P].1995-12-26.

    [23] TAKAVAMA R,TOMITA Y,FUIJI S,et al.Pyroelectric infrared image sensor[J].National Technical Report,1993,39(4):474-482.

    [24] WATTON R.Ferroelectric materials and IR bolometer arrays from hybrid arrays towards integration[J].Integrated Ferroelectrics,1994,4:175-186.

    [25] YI G,WU Z,SAYER M.Preparation of Pb(Zr,Ti)O3 thin film by Sol-Gel processing:electrical,optical and electrooptic properties[J].J Appl Phys,1988,64:2717-2723.

    [26] HUANG Z,ZHANG Q.RF-sputtered PLT thin films for infrared rared sensor arrays[J].Ferroelectrics,1999,225:57-66.

    CLP Journals

    [1] Zhihong Zhou, Xiuzhen Chen, Jin Ma, Zhengmin Xia. Application of firework algorithm into parameter estimation of attributed scattering centers in SAR images[J]. Infrared and Laser Engineering, 2022, 51(8): 20210581

    [2] Cong Chen. Parameter estimation of attributed scattering centers in SAR images based on wolf pack algorithm[J]. Infrared and Laser Engineering, 2021, 50(4): 20200409

    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Status and trend of pyroelectric uncooled infrared focal plane arrays[J]. Infrared and Laser Engineering, 2006, 35(4): 419
    Download Citation