• Opto-Electronic Engineering
  • Vol. 41, Issue 3, 22 (2014)
QI Pan1、2、*, ZHONG Jin′gang2、3, LI Ying3, CHEN Jianghan4, and ZHANG Guanwen4
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • 4[in Chinese]
  • show less
    DOI: 10.3969/j.issn.1003-501x.2014.03.004 Cite this Article
    QI Pan, ZHONG Jin′gang, LI Ying, CHEN Jianghan, ZHANG Guanwen. Portable Scanning Surface Plasmon Resonance Biosensor for Food Safety Detection[J]. Opto-Electronic Engineering, 2014, 41(3): 22 Copy Citation Text show less

    Abstract

    A portable scanning surface plasmon resonance biosensor was constructed for the safety detection of food. The optical system, hardware circuit and software design were thoroughly introduced. The clenbuterol hydrochloride was used as samples, and the biological probe was fixed on the sensor chip. Clenbuterol hydrochloride antibody with different concentration as 2 mg/L, 4 mg/L, 8 mg/L,16 mg/L, and 32 mg/L were continuously detected. The experimental results accord with the immune response rule of biological molecules. The validity of this method and device was demonstrated by experiments. The device is portable and easy to operate. The device has extensive prospect in the safety detection of food.
    QI Pan, ZHONG Jin′gang, LI Ying, CHEN Jianghan, ZHANG Guanwen. Portable Scanning Surface Plasmon Resonance Biosensor for Food Safety Detection[J]. Opto-Electronic Engineering, 2014, 41(3): 22
    Download Citation