• Infrared and Laser Engineering
  • Vol. 51, Issue 1, 20220005 (2022)
Yuqing Liu and Hongbo Sun
Author Affiliations
  • State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, Beijing 100084, China
  • show less
    DOI: 10.3788/IRLA20220005 Cite this Article
    Yuqing Liu, Hongbo Sun. Progress and application of nonlinear laser manufacturing (Invited)[J]. Infrared and Laser Engineering, 2022, 51(1): 20220005 Copy Citation Text show less
    References

    [1] D Strickland, G Mourou. Compression of amplified chirped optical pulses. Optics Communications, 55, 447-449(1985).

    [2] D E Spence, P N Kean, W Sibbett. 60-fsec pulse generation from a self-mode-locked Ti: sapphire laser. Optics Letters, 16, 42(1991).

    [3] F Y Wang, T T Zou, W Xin, et al. Control of the wettability of graphene oxide surface with femtosecond laser irradiation (Invited). Infrared and Laser Engineering, 49, 20201064(2020).

    [4] D M Yue, H L Sun, X Yang, et al. Annular drilling process and quality control neural network model of stainless steel micro-hole with femtosecond laser. Infrared and Laser Engineering, 50, 20200446(2021).

    [5] Y L Zhang, Y Tian, H Wang, et al. Dual-3D femtosecond laser nanofabrication enables dynamic actuation. ACS Nano, 13, 4041-4048(2019).

    [6] Z C Ma, X Y Hu, Y L Zhang, et al. Smart compound eyes enable tunable imaging. Advanced Functional Materials, 29, 1903340(2019).

    [7] X Q Liu, S N Yang, L Yu, et al. Rapid engraving of artificial compound eyes from curved sapphire substrate. Advanced Functional Materials, 29, 1900037(2019).

    [8] H B Jiang, Y L Zhang, Y Liu, et al. Bioinspired few-layer graphene prepared by chemical vapor deposition on femtosecond laser-structured Cu foil. Laser & Photonics Reviews, 10, 441-450(2016).

    [9] S T Lei, X Zhao, X M Yu, et al. Ultrafast laser applications in manufacturing processes: A state-of-the-art review. Journal of Manufacturing Science and Engineering, 142, 031005(2020).

    [10] B N Chichkov, C Momma, S Nolte, et al. Femtosecond, picosecond and nanosecond laser ablation of solids. Applied Physics A, 63, 109-115(1996).

    [11] S M Eaton, H B Zhang, P R Herman. Heat accumulation effects in femtosecond laser-written waveguides with variable repetition rate. Optics Express, 13, 4708-4716(2005).

    [12] S M Eaton, H Zhang, M L Ng, et al. Transition from thermal diffusion to heat accumulation in high repetition rate femtosecond laser writing of buried optical waveguides. Optics Express, 16, 9443-9458(2008).

    [13] K Sugioka, Y Cheng. Femtosecond laser three-dimensional micro- and nanofabrication. Applied Physics Reviews, 1, 041303(2014).

    [14] K M Davis, K Miura, N Sugimoto, et al. Writing waveguides in glass with a femtosecond laser. Optics Letters, 21, 1729-1731(1996).

    [15] E N Glezer, M Milosavljevic, L Huang, et al. Three-dimensional optical storage inside transparent materials. Optics Letters, 21, 2023-2025(1996).

    [16] Sugioka K, Cheng Y. Femtosecond Laser 3 D Micromachining f Microfluidic Optofluidic Applications [M]Springer Briefs in Applied Technology. London: Springer, 2014: 2425.

    [17] D F Tan, Y Li, F J Qi, et al. Reduction in feature size of two-photon polymerization using SCR500. Applied Physics Letters, 90, 071106(2007).

    [18] S Kawata, H B Sun, T Tanaka, et al. Finer features for functional microdevices. Nature, 412, 697-698(2001).

    [19] K Sugioka, Y Cheng, K Midorikawa. Three-dimensional micromachining of glass using femtosecond laser for lab-on-a-chip device manufacture. Applied Physics A-Materials Science & Processing, 81, 1-10(2005).

    [20] M Straub, M Afshar, D Feili, et al. Periodic nanostructures on Si(100) surfaces generated by high-repetition rate sub-15 fs pulsed near-infrared laser light. Optics Letters, 37, 190-192(2012).

    [21] L J Li, J T Fourkas. Multiphoton polymerization. Materials Today, 10, 30-37(2007).

    [22] Y L Zhang, Q D Chen, H Xia, et al. Designable 3D nanofabrication by femtosecond laser direct writing. Nano Today, 5, 435-448(2010).

    [23] S Ye, Q Cao, Q S Wang, et al. A highly efficient, stable, durable, and recyclable filter fabricated by femtosecond laser drilling of a titanium foil for oil-water separation. Scientific Reports, 6, 37591(2016).

    [24] X S Shi, X Li, L Jiang, et al. Femtosecond laser rapid fabrication of large-area rose-like micropatterns on freestanding flexible graphene films. Scientific Reports, 5, 17557(2015).

    [25] S V Marchese, C R E Baer, A G Engqvist, et al. Femtosecond thin disk laser oscillator with pulse energy beyond the 10-microjoule level. Optics Express, 16, 6397-6407(2008).

    [26] Kleinbauer J, Eckert D, Weiler S, et al. 80 W ultrafast CPAfree disk laser [C]Proceedings of SPIE, 2008, 6871 : 68711B.

    [27] J L Yong, F Chen, M J Li, et al. Remarkably simple achievement of superhydrophobicity, superhydrophilicity, underwater superoleophobicity, underwater superoleophilicity, underwater superaerophobicity, and underwater superaerophilicity on femtosecond laser ablated PDMS surfaces. Journal of Materials Chemistry A, 5, 25249-25257(2017).

    [28] J T Lin, S J Yu, Y G Ma, et al. On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing. Optics Express, 20, 10212-10217(2012).

    [29] H L Xu, H B Sun. Femtosecond laser 3D fabrication of whispering-gallery-mode microcavities. Science China-Physics Mechanics & Astronomy, 58, 114202(2015).

    [30] T Y Huang, H W Huang, D D Jin, et al. Four-dimensional micro-building blocks. Science Advances, 6, eaav8219(2020).

    [31] C Lv, X C Sun, H Xia, et al. Humidity-responsive actuation of programmable hydrogel microstructures based on 3D printing. Sensors and Actuators B-Chemical, 259, 736-744(2018).

    [32] B Mills, J A Grant-Jacob, M Feinaeugle, et al. Single-pulse multiphoton polymerization of complex structures using a digital multimirror device. Optics Express, 21, 14853-14858(2013).

    [33] B Mills, D J Heath, M Feinaeugle, et al. Laser ablation via programmable image projection for submicron dimension machining in diamond. Journal of Laser Applications, 26, 041501(2014).

    [34] D Wang, C Y Wen, Y N Chang, et al. Ultrafast laser-enabled 3D metal printing: A solution to fabricate arbitrary submicron metal structures. Precision Engineering, 52, 106-111(2018).

    [35] Y M Guo, Y Wang, Q L Hu, et al. High-resolution femtosecond laser beam shaping via digital holography. Optics Letters, 44, 987-990(2019).

    [36] S K Saha, D Wang, V H Nguyen, et al. Scalable submicrometer additive manufacturing. Science, 366, 105-109(2019).

    [37] S Hasegawa, Y Hayasaki, N Nishida. Holographic femtosecond laser processing with multiplexed phase Fresnel lenses. Optics Letters, 31, 1705-1707(2006).

    [38] C C Zhang, Y L Hu, W Q Du, et al. Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels. Scientific Reports, 6, 33281(2016).

    [39] B Xu, S Y Ji, D Pan, et al. Hybrid femtosecond laser fabrication of a size-tunable microtrap chip with a high-trapping retention rate. Optics Letters, 45, 1071-1074(2020).

    [40] C W Wang, L Yang, Y L Hu, et al. Femtosecond mathieu beams for rapid controllable fabrication of complex microcages and application in trapping microobjects. ACS Nano, 13, 4667-4676(2019).

    [41] S Y Ji, L Yang, C C Zhang, et al. High-aspect-ratio microtubes with variable diameter and uniform wall thickness by compressing Bessel hologram phase depth. Optics Letters, 43, 3514-3517(2018).

    [42] C Xin, L Yang, J W Li, et al. Conical hollow microhelices with superior swimming capabilities for targeted cargo delivery. Advanced Materials, 31, 1808226(2019).

    [43] J C Ni, C W Wang, C C Zhang, et al. Three-dimensional chiral microstructures fabricated by structured optical vortices in isotropic material. Light: Science & Applications, 6, e17011(2017).

    [44] W Chu, Y X Tan, P Wang, et al. Centimeter-height 3D printing with femtosecond laser two-photon polymerization. Advanced Materials Technologies, 3, 1700396(2018).

    [45] P Wang, W Chu, W B Li, et al. Three-dimensional laser printing of macro-scale glass objects at a micro-scale resolution. Micromachines, 10, 565(2019).

    [46] Z J Lin, J Xu, Y P Song, et al. Freeform microfluidic networks encapsulated in laser-printed 3D macroscale glass objects. Advanced Materials Technologies, 5, 1900989(2020).

    [47] B H Li, L Jiang, X W Li, et al. Flexible gray-scale surface patterning through spatiotemporal-interference-based femto-second laser shaping. Advanced Optical Materials, 6, 1801021(2018).

    [48] A Jurkeviciute, G Klimaite, T Tamulevicius, et al. Tailoring of silver nanoparticle size distributions in hydrogenated amorphous diamond-like carbon nanocomposite thin films by direct femtosecond laser interference patterning. Advanced Engineering Materials, 22, 1900951(2020).

    [49] X Jia, T Q Jia, S A Zhang, et al. Manipulation of cross-linked micro/nanopatterns on ZnO by adjusting the femtosecond-laser polarizations of four-beam interference. Applied Physics A-Materials Science & Processing, 114, 1333-1338(2014).

    [50] S Shrestha, A C Overvig, M Lu, et al. Broadband achromatic dielectric metalenses. Light: Science & Applications, 7, 85(2018).

    [51] S Nagelberg, L D Zarzar, N Nicolas, et al. Reconfigurable and responsive droplet-based compound micro-lenses. Nature Communications, 8, 14673(2017).

    [52] S Thiele, K Arzenbacher, T Gissibl, et al. 3D-printed eagle eye: Compound microlens system for foveated imaging. Science Advances, 3, e1602655(2017).

    [53] Y H Su, T T Qin, B Xu, et al. Patterned microlens processed using two-photon polymerization of femtosecond laser and its imaging test. Optics and Precision Engineering, 28, 2629-2635(2020).

    [54] Y L Sun, Q Li, S M Sun, et al. Aqueous multiphoton lithography with multifunctional silk-centred bio-resists. Nature Communications, 6, 8612(2015).

    [55] Q Yang, S Y Tong, F Chen, et al. Lens-on-lens microstructures. Optics Letters, 40, 5359-5362(2015).

    [56] I B Sohn, H K Choi, Y C Noh, et al. Laser assisted fabrication of micro-lens array and characterization of their beam shaping property. Applied Surface Science, 479, 375-385(2019).

    [57] H R Zhang, F Y Yang, J J Dong, et al. Kaleidoscopic imaging patterns of complex structures fabricated by laser-induced deformation. Nature Communications, 7, 13743(2016).

    [58] H C Bauser, C R Bukowsky, M Phelan, et al. Photonic crystal waveguides for >90% light trapping efficiency in luminescent solar concentrators. ACS Photonics, 7, 2122-2131(2020).

    [59] M X Li, J W Ling, Y He, et al. Lithium niobate photonic-crystal electro-optic modulator. Nature Communications, 11, 4123(2020).

    [60] C Fenzl, T Hirsch, O S Wolfbeis. Photonic crystals for chemical sensing and biosensing. Angewandte Chemie-International Edition, 53, 3318-3335(2014).

    [61] Z S Liu, X Y Zhou, X H Jia, et al. Visible light perovskite-coated photonic crystal surface-emitter on SOI. Semiconductor Science and Technology, 35, 075019(2020).

    [62] D Z Wei, C W Wang, H J Wang, et al. Experimental demonstration of a three-dimensional lithium niobate nonlinear photonic crystal. Nature Photonics, 12, 596-600(2018).

    [63] Kalli K, Theodosiou A, Ioannou A, et al. Femtosecond laser processing of optical fibres f novel sens development [C]Proceedings of the 25 th International Conference on Optical Fibre Senss (OFS), 2017: 10323.

    [64] X Y Ming, Q Guo, Z K Xue, et al. A femtosecond laser-inscribed fine-core long-period grating with low temperature sensitivity. Chinese Optics, 13, 737-744(2020).

    [65] X Q Liu, R Cheng, J X Zheng, et al. Wear-resistant blazed gratings fabricated by etching-assisted femtosecond laser lithography. Journal of Lightwave Technology, 39, 4690-4694(2021).

    [66] X T Hou, X Y Xu, G Z Xu, et al. Waveguide-coupled superconducting nanowire single-photon detectors based on femtosecond laser direct writing. Optics Express, 29, 7746-7756(2021).

    [67] J He, J He, X Z Xu, et al. Single-mode helical Bragg grating waveguide created in a multimode coreless fiber by femtosecond laser direct writing. Photonics Research, 9, 2052-2059(2021).

    [68] Y J Song, Y Q Zhang, P E Bernard, et al. Multiplexed volumetric bar-chart chip for point-of-care diagnostics. Nature Communications, 3, 1283(2012).

    [69] Y Liao, J X Song, E Li, et al. Rapid prototyping of three-dimensional microfluidic mixers in glass by femtosecond laser direct writing. Lab on a Chip, 12, 746-749(2012).

    [70] Y Yalikun, Y Hosokawa, T Iino, et al. An all-glass 12 μm ultra-thin and flexible microfluidic chip fabricated by femtosecond laser processing. Lab on a Chip, 16, 2427-2433(2016).

    [71] G L Roth, C Esen, R Hellmann. Femtosecond laser direct generation of 3 D-microfluidic channels inside bulk PMMA. Optics Express, 25, 18442-18450(2017).

    [72] B Xu, Y Shi, Z X Lao, et al. Real-time two-photon lithography in controlled flow to create a single-microparticle array and particle-cluster array for optofluidic imaging. Lab on a Chip, 18, 442-450(2018).

    [73] A Elgohary, E Block, J Squier, et al. Fabrication of sealed sapphire microfluidic devices using femtosecond laser micromachining. Applied Optics, 59, 9285-9291(2020).

    [74] V Bharadwaj, O Jedrkiewicz, J P Hadden, et al. Femtosecond laser written photonic and microfluidic circuits in diamond. Journal of Physics-Photonics, 1, 022001(2019).

    [75] C Y Zhang, H Y Liu, W Q Man, et al. Femtosecond laser induced surface micro-and nano-structures by orthogonal scanning processing. Optics and Precision Engineering, 25, 3063-3069(2017).

    [76] C Li, R Stoian, G H Cheng. Laser-induced periodic surface structures with ultrashort laser pulse. Chinese Optics, 11, 1-17(2018).

    [77] H U Lim, J Kang, C L Guo, et al. Manipulation of multiple periodic surface structures on metals induced by femtosecond lasers. Applied Surface Science, 454, 327-333(2018).

    [78] J J J Nivas, K K Anoop, R Bruzzese, et al. Direct femtosecond laser surface structuring of crystalline silicon at 400 nm. Applied Physics Letters, 112, 121601(2018).

    [79] E Rebollar, Aldana J R V de, J A Perez-Hernandez, et al. Ultraviolet and infrared femtosecond laser induced periodic surface structures on thin polymer films. Applied Physics Letters, 100, 041106(2012).

    [80] S Hohm, M Rohloff, A Rosenfeld, et al. Dynamics of the formation of laser-induced periodic surface structures on dielectrics and semiconductors upon femtosecond laser pulse irradiation sequences. Applied Physics A-Materials Science & Processing, 110, 553-557(2013).

    [81] F Fraggelakis, E Stratakis, P A Loukakos. Control of periodic surface structures on silicon by combined temporal and polarization shaping of femtosecond laser pulses. Applied Surface Science, 444, 154-160(2018).

    [82] A Borowiec, H K Haugen. Subwavelength ripple formation on the surfaces of compound semiconductors irradiated with femtosecond laser pulses. Applied Physics Letters, 82, 4462-4464(2003).

    [83] G Miyaji, K Miyazaki. Origin of periodicity in nanostructuring on thin film surfaces ablated with femtosecond laser pulses. Optics Express, 16, 16265-16271(2008).

    [84] V R Bhardwaj, E Simova, P P Rajeev, et al. Optically produced arrays of planar nanostructures inside fused silica. Physical Review Letters, 96, 057404(2006).

    [85] J Reif, F Costache, M Henyk, et al. Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics. Applied Surface Science, 197, 891-895(2002).

    [86] B Dusser, Z Sagan, H Soder, et al. Controlled nanostructrures formation by ultra fast laser pulses for color marking. Optics Express, 18, 2913-2924(2010).

    [87] T H Her, R J Finlay, C Wu, et al. Microstructuring of silicon with femtosecond laser pulses. Applied Physics Letters, 73, 1673-1675(1998).

    [88] T H Her, R J Finlay, C Wu, et al. Femtosecond laser-induced formation of spikes on silicon. Applied Physics A-Materials Science & Processing, 70, 383-385(2000).

    [89] A Y Vorobyev, C L Guo. Direct creation of black silicon using femtosecond laser pulses. Applied Surface Science, 257, 7291-7294(2011).

    [90] J L Yong, F Chen, Q Yang, et al. Nepenthes inspired design of self-repairing omniphobic slippery liquid infused porous surface (SLIPS) by femtosecond laser direct writing. Advanced Materials Interfaces, 4, 1700552(2017).

    [91] H K Soong, J B Malta. Femtosecond lasers in ophthalmology. American Journal of Ophthalmology, 147, 189-197(2009).

    [92] E Juhasz, T Filkorn, K Kranitz, et al. Analysis of planned and postoperatively measured flap thickness after LASIK using the lensx multifunctional femtosecond laser system. Journal of Refractive Surgery, 30, 622-626(2014).

    [93] M Farsari, B N Chichkov. Two-photon fabrication. Nature Photonics, 3, 450-452(2009).

    [94] A Ovsianikov, M Malinauskas, S Schlie, et al. Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications. Acta Biomaterialia, 7, 967-974(2011).

    [95] P Tayalia, C R Mendonca, T Baldacchini, et al. 3D cell-migration studies using two-photon engineered polymer scaffolds. Advanced Materials, 20, 4494-4498(2008).

    CLP Journals

    [1] Guanglei Liang, Shufeng Sun, Jin Wang, Mingming Jiang, Fengyun Zhang, Xi Wang, Jing Shao, Zhihao Qu, Pingping Wang. Research and application of diffractive optical element fabricated by laser direct writing[J]. Infrared and Laser Engineering, 2023, 52(4): 20220567

    [2] Qianhao Wang, Xiaojun Yang, Wenlong Wen, Hualong Zhao, Yi Li. Ultrafast observation of air plasma induced by femtosecond laser micromachining[J]. Infrared and Laser Engineering, 2023, 52(11): 20230158

    [3] Zhiwei Lv, Zhongze Liu, Hui Chen, Duo Jin, Xin Hao, Wenqiang Fan, Yulei Wang, Zhenxu Bai. Review of multi-wavelength laser technology based on crystalline Raman conversion (invited)[J]. Infrared and Laser Engineering, 2023, 52(8): 20230420

    Yuqing Liu, Hongbo Sun. Progress and application of nonlinear laser manufacturing (Invited)[J]. Infrared and Laser Engineering, 2022, 51(1): 20220005
    Download Citation