[1] Favro L, Han X, Ouyang Z, et al. Infrared imaging of defects heated by a sonic pulse[J]. Review of Scientific Instruments, 2000, 71(6): 2418-2421.
[2] Renshaw J, Chen J, Holland S, et al. The sources of heat generation in vibrothermography[J]. NDT & E International, 2011, 44(7): 736-739.
[3] Morbidini M, Cawley P, Barden T, et al. Prediction of the thermosonic signal from fatigue cracks in metals using vibration damping measurements[J]. Journal of Applied Physics, 2006, 100(10): 104905-1-104905-13.
[4] Berens A R. NDE Reliability Data Analysis[M]//ASM Metals Handbook. 9th ed. New York: ASM International, 1989, 17: 689-701.
[5] Stephen Holland, Christopher Uhl, Jeremy Renshaw. Toward a viable strategy for estimating vibrothermographic probability of detection[C]//AIP Conference Proceeding, 2008, 975: 491-497.
[6] Stephen Holland, Christopher Uhl, Zhong Ouyang, et al. Quantifying the vibrothermographic effect [J]. NDT & E International, 2011, 44(7): 775-782.
[7] Ming Li, Stephen Holland, William Meeker. Quantitative multi-inspection-site comparison of probability of detection for vibrothermography nondestructive evaluation data[J]. J Nondestr Eval, 2011, 30(9): 172-178.
[8] Duan Yuxia, Pierre Servais, Marc Genest, et al. ThermoPoD: a reliability study on active infrared thermography for the inspection of composite materials [J]. Journal of Mechanical Science and Technology, 2012, 26(7): 1985-1991.
[9] Ben Weekes, Darry Almond, Peter Cawley, et al. Eddy-current induced thermography-probability of detection study of small fatigue cracks in steel, titanium and nickel-based superalloy [J]. NDT & E International, 2012, 49: 47-56.
[10] Liu Junyan, Liu Yang, Wang Fei, et al. Study on probability of detection(POD) determination using lock-in thermography for nondestructive inspection(NDI) of CFRP composite materials [J]. Infrared Physics & Technology, 2015, 71: 448-456.
[11] Feng Fuzhou, Zhang Chaosheng, Min Qingxu, et al. Effect of engagement force on vibration characteristics in sonic IR imaging[J]. Ultrasonics, 2015, 56(2): 473-476.
[13] ASTM Committee on Fatigue and Fracture. E647-11 Standard Test Method for Measurement of Fatigue Crack Growth Rates [S]. Pennsylvania: ASTM International, 2011.
